Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.9 LAccepted-AOC SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹46.9 L+₹1.7 L (3.69%)Rejected-Finance N A | NA | NA | 121004 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹47.1 L+₹1.9 L (4.23%)Rejected-Finance GEETANJALI COMPLEX B BLOCK 2ND FLOOR MUKUNDA DAS ROAD MILANPALLY SILIGURI 734405 DARJEELING | SILIGURI | DARJEELING | WB | 734405 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹47.4 L+₹2.2 L (4.80%)Rejected-Finance EAST VIVEKANANDAPALLY RABINDRA SARANI SILIGURI 734 006 DIST DARJEELING W B | JALPAIGURI | WEST BENGAL | 734006 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹47.5 L+₹2.3 L (5.05%)Rejected-Finance NEAR PAYAL CINEMA P O SEVOKE ROAD SILIGURI 734 001 | DARJEELING | WEST BENGAL | 734001 | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹44.4 L
EMD Value
₹88,800
Closing Date
30 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
SPECIAL REPAIR OF EXISTING BOREWELL WITH DEVELOPMENT OF BOREWELL IN SUKNA MIL STN AND U AREA AND CERTAIN OTHER SANCTIONED WORKS IN SUKNA MIL STN OF GE SUKNA
2022_MES_562214_1
GE Sukna/8475
Open Tender
Civil Works
Works
270 days
Sukna
AS PER NIT
8 documents required · 8 mandatory
₹500
GE Sukna
₹88,800
Yes
24 Jan 2023
10 Nov 2022
2 Dec 2022
10 Nov 2022
30 Nov 2022
24 Nov 2022
10 Nov 2022 - 30 Nov 2022
Amount
BOQ Part-I (B/R Work)
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all excavated material in soft / loose soil complete all as specified and directed.
M&L sand cushioning with clean and dry sand in trenches for protection of UG cable and including punning down complete all as specified and directed. Note:- Punned thickness shall only be measured and paid.
Supply & laying sub class 'B' bricks of old size, laid along alignment of cable as protection to cable in trenches complete all as specified and directed.
S&F 40 mm bore galvanised steel tubing, light grade with necessary fittings, laid under road crossing, for cable / earth lead protection including taking down complete all as specified and directed. Make - Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
Boring holes horizontally under road, manually, in soft / loose soil, without cutting / disturbing the existing road surface, suitable for inserting pipe of n exc. 80 mm bore at a depth 0.75 m to 1.0 m from road surface for passing of UG cable, getting out and disposal of soil to a distance not exceeding 50 m complete all as specified and as directed. Note:- GI Pipe shall be measured and paid separately.
Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.
Removing of excavated surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in sub base, floors, paths, plinth protection, hardstanding etc. finished even and smooth without using extra cement including roughening of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.
M&L forming 12 mm thick & 100 mm deep expansion joints in concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and directed.
M&L cement concrete 1:2:4 type B1, (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.
M&L 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like laid over and including screed bed 15 mm thick in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L RCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in columns, pillars, piers, posts and struts complete all as specified and directed.
M&L brick work with sub class 'B' brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed.
Use and Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal in plan for rough finished surfaces of concrete complete all as specified and directed.
M&L hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and fair without using extra cement complete all as specified and directed.
M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per Sl item No. 1.21 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with grade of steel conforming to Fe - 410 - W (Gde E - 250) Quality - B complete all as specified and directed.
M&L for mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F mild steel screw bolts diameter of neck 12 to 20 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but not exc. 30 cm long complete all as specified and directed.
S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed. Make : Electrosteel Casting Ltd/ Jindal Saw Ltd/ Tata Metallika
S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof and complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
M&L decorative type plaster of paris work of size not less than 50 mm x 50 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.
M&L 10 mm thick double charged vitrified ceramic tiles light shade (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20 mm thick screed bed in CM 1:4 including taking down old tiles including bedding but not backing complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
All as per Sl item No 1.29 above but in skirting / dado etc. laid over and including screed bed 10 mm thick in CM 1:3.
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Apcolite (Asian) / Luxol (Berger) / Jenson & Nicholson Paints Ltd (Borolac) / Shalimar Paints Ltd (Superlac)
M&L preparation of new plastered wall surfaces and including applying two coats of cement base paint over a coat of primer complete all as specified and directed. Make :- Jotun India Pvt Ltd / Snowcem Plus / Berger Paints / Asian Paints (Gutucam) / Crimocem Super Cement paints
BOQ Part-II (E/M Work)
M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box & modular white cover plate with frame of required module for mounting or housing switches, socket outlets, fan regulators, etc. incuding blankng plates & all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces wiring & connected switch / socket / regulator bell etc. complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
All as per Sl. item No. 2.01 above but 1.50 sqmm copper conductor for 3 pin 5 / 6 Amps socket outlet point on independent board.
All as per Sl. item No. 2.01 above but for one 5 / 6 Amps socket outlet point on same board.
M&L point wiring with 2.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non metallic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) including modular metal flush box, modular white cover plate with frame of required module, blankng plates & all other fixing accessories for 15 / 16 Amps socket outlet on independent board and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces including taking down wiring & connected switch / socket etc. complete all as specified and directed. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
S&F modular switch 1 way 6A, 1 module, white complete all as specified and directed. Make:- Havells (IVY & IRENE) / Panasonic (Vision & ROMA) / C&S
All as per Sl item No. 2.05 above but 16 Amps.
S&F modular socket outlet, 6A - 2/3 pin combined 2 module, white complete all as specified and directed. Make:- Havells (IVY & IRENE) / Panasonic (Vision & ROMA) / C&S
All as per Sl item No. 2.07 above but 6 / 16 Amps.
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- Havells / Anchor / Legrand
S&F electronic modular fan regulator, stepped type, white 120 W - 2 module complete all as specified and directed. Make :- Havells (IVY & IRENE) / Panasonic (Vision & ROMA) / C&S
S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Make :- L&T / Havells (Brand-Max³, EURO-II) / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)
All as per items No 2.11 above but 32 Amp MCB SPN.
S&F MCB protected power unit with enclosure (with six module plate and PVC flush box) suitable for flush mounting including socket, 3 pin plug, one MCB SPN/DP 25 Amp 10 kA, 240V 'C' curve and starter inlcuding taking down complete all as specified and as directed. Make :- Havells / L&T / Panasonic / Hager / ABB / Legrand / Indo Asian
S&F MCB DB, SPN 12 way, IP-30, IK08, single door type, with 200A copper neutral and earth bus bar for fixing MCB, fixed flush to wall & making good the disturbed surfaces complete all as specified and directed. Make:- L&T / Havells / Panasonic / Hager / ABB / Legrand / Indo Asian (Optipro)
M & L for sub main wiring with 2 runs of 2.5 sqmm main wire alongwith 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade copper conductor cable, drawn through and including adequate size PVC casing caping (double lock pattern) with all fittings & accessories on walls / ceiling surfaces etc., complete all as specified and directed. NOTE :- Two runs of main copper conductor, one run of earth wire and one run of PVC casing caping shall be measured as one unit length. Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Casing Caping:- Richa Cables / AKG Industries / Harsh Electro Systems
All as per item No. 2.15 above but with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire.
Supply, errection, commissioning and testing of high galvanizecd mast light 16 meter high suitable for 6 Nos 1x200 W LED flood light and having three point suspension system with steel wire rope of 6 mm dia and double drum winch luminare mounting arm, 01 No LED type aviation obstruction light including lamp, lightning arrester spike, power tools including cutting road/had standing, excavation for RCC foundation and RCC foundation complete with following and as specified in particular specification:- (a) High mast fabricated from steel plates conforming to BSEN-10025/IS:5986, cut and folded to from a polygonal section. Mast is in two sections for 16 mtr heights having only longitudinal weld conforming to BS-5135-AWS. The mast is to be provided with a fully penetrated flange which is free from any laminations incursions. The welded connection of the base flange is fully developed to the strength of the eintire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimination of helical stress concentration.For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanized (As per IS-2629) internally and externally, having uniform coating thickness of average 86 microns for bottom/top sections respectively.
(b) An adequate door opening shall be provided at the base of the mast. The opening is such that it permits clear access to equipments like winch, cable, wire rope, plug & socket etc. and also facilitates easy removal of the winch for servicing. The door opening is complete with a close fitting vandal resistant allen key locking with provision for external lock. The door opening is carefully designed and reinforced with adequate steel section so that the mast section at the base is unaffected and undue buckling of the cut portion is prevented under heavy wind condition.
(c) Mast structure shall be sustain an assumed maximum reaction arising from wind speed as per IS-875 (Part-3) 1987 (Three second) which is measured at a height of 10 mtrs above ground level. (d) The high mast is provided with accessories which include a raising and lowering system (R&L), trailing cable, power tool, lighting finial and aviation obstruction warning light. (e) The wire ropes are of stainless steel grade AISI 304 with minimumn 6mm diameter and 7/19 construction. Its central cores is also SS and ahave a minimum breaking strength of 2400 kgs. The power tool is integral type suitable for nadling the total head load. It has a mechanical torque limiter to ensure safety and also a manual handle is provided.
(f) Earthing 4 Nos (02 for FP box and 02 for High mast) with galvanized iron earth plate 600 x 600x 6.3 mm size buried in gound vertically at a depth not less than 2.25 mtr below ground level with the top edge of earth plate at a depth not less than 1.50 metre below ground level connected to galvanized steel strip 30 x 6mm as earth lead by means of bolts, nuts, check nuts and washerers of galvanized steel, earth plate electrode surrounded by a packed thickness of char coal of coke dust mixed with common salt in alternate layers not exc 150 mm thick, aluminium strip protected with and including galvanized iron pipe 40mm bore (dia) light grade, upto 1.0 meter above the floor level of the building where it is connected incl necessary excavation in soft/loose soil, returing, filling in and removal of surplus spoil upto a distance of 50.00 mtr and all as shown in electrical plate No 3 of MEs schedule Part- I and testing on completion.
(g) Earthing 1 No (for surge protection device) with galvanized iron earth plate 600 x 600 x 6.3 mm size buried in gound vertically at a depth not less than 2.25 mtr below ground level with the top edge of earth plate at a depth not less than 1.50metre belown ground level connected to galvanized earth lead wire 4.0 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanized steel, earth plate electrode surrounded by a packed thickness of char coal of coke dust mixed with common salt in alternate layers not exc 150mm thick, aluminium strip protected with and including galvanized iron pipe 20mm bore (dia) light grade, incl necessary excavation in soft/loose soil, returning, filling in and removal of surplus spoil upto a distance of 50.00 mtr and all as shown in electrical plate No 3 of MES schedule Part- I and testing on completion. (h) The light luminaries shall be 1 x 160 watt LED light- 06 Nos with die cast aluminium housing with Ip 65 protection & all as per recommendations of the OEM complete. (j) The aviation obstruction light LED type with IP 65 protection & all as per the recommendations of the OEM complete.
(k) LT feeder pillar box both side openable with pronected globe foof for rain water protection, manufactured by a CPRI approved manufacturer dust and vermin proof, suitable for 440 volt 3 Phase 4 wire system made out of 3.15mm thick CRCA sheet of size 1m x 1 x 0.45m and built upon rigid frame work having front and rar hinged double shutter doors with neoprene rubber gasket, eposy powder coated incl danger plate, earthing strip point and ventilation louvers at rear side, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers, etc and embeded with 50x50x6mm mild steel angle iron frame complete with PCC foundation in cement concrete 1:2:4 )20mm graded stone aggregate) and testing after installation complete all as specified and comprising of the following:-
(viii) Contractor MNX 32, 3 Phase 3 pole 415 volt with coil operating voltage 230 volt - 02 Nos. Make: (C&S/ABB/L&T,Legrand,Schneider,Havells) (ix) Connector/terminal set 16-50 Sqmm 5 pole fitted inside the mast for cable connection complete. (x) Surge protection device type 2, 40KA, 3P+N, 2 module with 01 No 32 Amps MCB TPN incl internal connection done by using suitable size of copper wire compelete all as specified and directed. Make: (C&S/ABB/L&T,Legrand,Schneider,Havells) Make of Digital Ammeter/Voltmeter/ LED indicator : (C&S/ABB/L&T,Legrand,Schneider,Havells) Note: (a) Design/drawing/BOM of the High mast light showing the dimensions is to be obtained from manufacturer / supplier & is to be got approved from the GE before placing final order to the manufacturer. (b) Anything missed out in the technical specification but technically required for efficient working is deemed to be included in the quoted rates. Make of High mast light : Phillips/Crompton/Bajaj make of flood light : Phillips/Crompton/Bajaj make of Contractor : L&T/ABB/Legrand
Supply & laying LT XLPE insulated, armoured heavy duty electric cable with alumimium conductor, 1100 volts grade, cross sectional area 35 Sqmm x 3.5 Core, laid in trenches / duct / on pole complete all as specified and directed. Make :- Havells / KEI / Polycab
Taking up submersible pump assembly of capacity 10 to 15 HP with and including column pipe of approximate 50 to 80 m length from borewell using chain pulley block manually, transporting to workshop and back including dismantling, taking out burnt winding wire, rewinding using super enamelled insulated copper winding wire of appropriate gauge and turn, providing insulation materials and assembling, air washing lowering complete assembly and electrically connecting complete all as specified and directed.
S&F in repairs 80 mm bore & 3 m long MS heavy duty seamless black column pipe with both ends flanged, wall thickness not less than 5.4 mm in borewell with and including all jointing materials such as nut, bolts, washers, rubber gasket etc. complete all as specified and directed. Make : Electrosteel Casting Ltd/ Jindal Saw Ltd/ TATA Metallika
S&F in repairs PVC insulated 6 sqmm 3 core flat submersible cable copper conductor 1100 V grade in bore hole / over the ground, connecting with motor and starter terminals complete all as specified and directed. Make :- Havells / KEI / Polycab / RR Kabel Ltd. / HPL
M&L rolled mild steel conforming to Fe-410W (Gde-E-250) quality-B in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. & dismantling complete all as specified and directed.
M&L for development of tube / bore well with air compressor of suitable capacity till sand / mud free water of potable quality is obtained and to achieve minimum discharge capacity of 3600 LPH / max yield complete all as specified and directed. Note:- Compressor with acessories & tubes etc. shall be arrranged by the contractor and deemed to be included with the quoted rate.
Supply, lowering, installation, testing and commissioning of submersible pump set complete with 3 phase submersible electric motor coupled with the pump having capacity 11 KW/15 HP , 7 stage or as per OEM recommended stage suitable for coloum pipe/ outlet pipe of 80mm dia fixing with existing coloumn pipe at site including taking out Unserviceable pump complete all as specified and directed. Make of submersible pump : Kirlosker/ KSB/ Crompton Greaves Note : Unserviceable Pump shall be deposited to MES store yard.
Supply, lowering, installation, testing and commissioning of submersible pump set complete with 3 phase submersible electric motor coupled with the pump having capacity 7.5 KW/10 HP , 4 stage or as per OEM recommended stage suitable for coloum pipe/ outlet pipe of 80mm dia fixing with existing coloumn pipe at site complete all as specified and as directed. Make of submersible pump : Kirlosker/ KSB/ Crompton Greaves Note: Taking out of old submersile pump including column pipe and lowering of new pump shall be included in quoted unit rate. Unserviceable Pump shall be deposited to MES store yard.
Supply, installation, testing and commissioning of centrifugal pump set horizontal split casing type, electric motor driven, suction and delivery 65 mm x 50 mm, with the pump having capacity 3.7 KW/5 HP, 415 V , 3 Ph AC including taking out Unserviceable pump complete all as specified and directed. Make of pump : Kirlosker/ KSB/ Crompton Greaves Note : Unserviceable Pump shall be deposited to MES store yard.
Supply,, installation, testing and commissioning of centrifugal pump set horizontal split casing type, electric motor driven, suction and delivery 80 mm x 65 mm, monoblock pump having capacity 5.5 KW/7.5 HP , 415 V , 3 Ph AC including taking out Unserviceable pump complete all as specified and directed. Make of pump : Kirlosker/ KSB/ Crompton Greaves Note : Unserviceable Pump shall be deposited to MES store yard.
M&L for mild steel fittings such as reducer, well cap, bail plug, strip for centering, clamps etc complete all as specified and directed.
Supplying, fixing and jointing of Cast iron NRV, ISI marked, Class PN-1.6 with flanged and drilled ends, suitable for 80mm nominal bore pipe/fittings including joints and jointing materials such as bolt, nuts, washers and rubber gasket etc complete all as specified and directed. Make : Leader/ Upadhyay/ Venus
S&F fully automatic, star delta, motor starterfor centrifugal/ mono block pump, with in-built single phase preventor, suitable for 10 HP motor with suitable relay range including taking down complete all as specified and directed. Make - L&T / Havells / Panasonic / Hager / ABB / Legrand
All as per Sl item No 2.37 above but 5 HP
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to earth lead of galvanised iron strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
S&F LED light fitting 1 x 18 / 20 watt batten type 230 Volts, 4 feet long, extruded polycarbonate housing & extruded polycarbonate diffuser, suitable for surface mounting, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 80 (minimum), IP 20, PF 0.90 (minimum), THD 20% (Maximum), with in-built electrnoic driver with APFC, in-built surge protection 2 KV (minimum) inlcuding all fixing arrangement, electrically connecting from ceiling rose to light fitting complete all as specified and directed. Make:- Century LED Ltd/ Crompton / Surya / Havells
DEBABROTA ROY CHOWDHURY
R K UDYOG
Embee associates
Janata Enterprises
M/S B B CONSTRUCTION
GEETA CONSTRUCTION
D K SARKAR
ELECTRO WIR WAY
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .