PROVISION OF FILLETS ON EITHER SIDE OF ROADS AND ALTERATION TO ACCESS ROADS IN FRONT OF SAFETY BAY AT AF STATION HAKIMPET AND WIDENING OF ROAD NEAR MAIN GATE AT AF STATION BEGUMPET UNDER GE AIR FORCE HAKIMPET

Amount

Surface excavation not exc 30 cm deep and average 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Excavating over areas, not exc 1.5 mtr deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth and getting out any type of soil for Parapet walls etc complete all as specified and as directed..

Removing excavated material exc. 1.50 km but not exc. 5.0 km and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed.

Removing excavation material not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller of capacity exc 8 tonne and not exc 12 tonne power roller complete all as specified and as directed.

M&L for solling (or sub base) 200 mm spread thickness with broken boulders or quarried stone, interstices filled ,surfaces formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

M&L for Water Bound Macadam (WBM) 150 mm thick (compacted thickness) in two layers of 75 mm thick each layer , with coarse granite aggregates of grading 2 (63 mm to 40 mm size) each layer spread separately, rolled and consolidated to required gradient and camber etc., using power roller exceeding 8 tonne and not exceeding 12 tonne capacity power roller complete all as specified and as directed.

M&L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with mechanical blower or brooms and finally fanning the cleared surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M & L for applying evenly a priming / tack coat with bituminous primer (paving bitumen (RS-1) Rapid Setting @ 5.0 Kg / 10 Sqm complere all as specified and as directed .

M&L for Applying evenly a primary / tack coat with bitumen emulsion at 4.0 Kg/ 10 Sqm complete all as specified and as directed.

M&L for soling (or GSB Granular Sub Base) 300 mm spread thickness with broken boulders or quarried stone Interstices filled, surface formed and rolled and consolidated to required gradient and camber of spread thickness 300 mm complete all as specified and as directed.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags etc to remove all loose dirt etc complete all as specified and as directed.

M & L for applying evenly a priming/tack coat with bituminous primer (Paving Bitumen (RS-1) Rapid Setting @ 2.5 kg /10 Sqm complere all as specified and as directed .

M&L for Bituminous Premix Semi Dense Asphaltic Concrete (SDAC) (using VG-30 grade bitumen) 40 mm consolidated thicknesh with 5.5% of binder content by weight of tatal mix, rolled and compacted to required camber and gradient complete all as specified and as directed.

M&L for preparing bituminous surfaces of roads and marking 2.50 mm thick centre lines , stop lines , dashes , arrows etc and the like not exc 10 cm wide on roads , pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS- 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and as directed.

S & F metal tubular dealineatore made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green , red and yellow reflector radium type of 25 mm wide strips with anti theft steel net for reflector protection including embedded in cement concrete PCC 1:2:4 type B-1 mix using 20 mm graded stone aggregate (150 mm x 150 mm x 300 mm size) complete all as specified and as directed. MAKE :- Bons Light PVT Ltd, Ahmedabad / TATA BP Solar / 3M / Asian Controlls , Mumbai / SA Traffic Safety , Kolkata

M&L for continuous brick edging with sub class 'B' bricks old size with width equal to the width of the brick ; laid dry on end vertically complete all as specified and as directed.

M&L for cement concrete PCC 1:5:10 type E-2 mix (using 40 mm graded stone aggregate) as in foundations filling and mass concrete complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6.0 mtr mean radius built in CM1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick cement in CM 1:4 on fair surfaces of brick work or concrete surfacesand rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B-1 mix (using 20 mm graded stone aggregate) as in kerb stone set in cement mortar 1:4 complete all as specified and as directed.

M&L for Preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M/S DIVIJA BUILDERS

B Sreepathy Rao & Sons

DWARKA PERSHAD RADHEY RAMANLAL

B RAMACHANDRAIAH AND SONS