Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹20.8 L+₹21,183.50 (1.03%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹21.3 L+₹73,715.10 (3.58%)Rejected-AOC 37 222 BUNDU KATRA AGRA UP | AGRA | UP | L3 | Rejected-AOC L3 | |
| 4 | L4₹21.4 L+₹83,938.95 (4.08%)Rejected-AOC | L4 | Rejected-AOC L4 | |
| 5 | L5₹21.8 L+₹1.2 L (6.03%)Rejected-AOC | L5 | Rejected-AOC L5 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Bharatpur
Kanjoli line Bharatpur
Addn/altn to bldg No P-32A and office complex at Sewar fort Bharatpur
2023_MES_595376_1
8241/E8
Open Tender
Civil Works
Item Rate
180 days
GE Bharatpur
As per NIT
6 documents required · 6 mandatory
₹500
GE Bharatpur
₹48,000
Yes
21 Jul 2023
13 May 2023
14 Jun 2023
13 May 2023
12 Jun 2023
29 May 2023
15 May 2023 - 24 May 2023
Amount
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M & L for rendering 15 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces finished fair & even on External Surfaces complete all as specified and directed.
Ditto as above item no 2 but in CM (1:6) on other than fair ,finished even and smooth without using extra cement on Internal surfaces complete all as specified and directed.
M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement complete all as specified and as directed
M&L for Two coats of Apex Weather Proof Exterior emulsion (Water Based 100% Acrylic ) or approved equivalent grade paint using hand roller over one coat exterior grade wall primer on cement plaster,concrete ,exterior ceiling etc .Color & Pattern /Color Combination of the paint shall got approved from GE complete all as specified and directed..
M&L for Two coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented alkali resistant priming paint , over 1.5mm thick wall care putty (In Two Coats) on Wall Surface including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work complete all as specified and directed.
Complete removal of existing treatment of old plastered surfaces and applyingTwo coats of oil emulsion distempering white or tinted (copolymer based resin glue to be added for longer durability and better finish) using hand roller over one coat of water based white pigmented alkali resistant priming paint , over 1.5mm thick wall care putty (In Two Coats) on Wall Surface after applying plaster of paris to all uneven surface including sand paper gentle rubbing to obtain smooth surfaces, including all necessary arrangement for execution of work complete all as specified and directed.
M&L for Three coats of white wash on old plastered or unplastered surfaces (Stone slab) of Ceiling including Complete removal of existing treatment complete all as specified and directed.
M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified and directed.
Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in Soft/Loose soil complete all as specified and directed..
Excavation in trenches n.exc. 1.5 m wide and exc. 1.5 m but n.exc 3.0m in depth, for foundation, etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and n.exc. 3.0 m in depth and getting out in Soft/Loose soil complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
M & L for form work to sides of concrete foundations, foottings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar works; vertical or to batter for rough finished surfaces complete all as specified and directed.
M&L for RCC M-25 in foundation, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed..
M&L for formwork to sides and soffits of floor or roof beams, beam ,haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhungs etc. also splays between floors and beams etc. as in rough finished surfaces complete all as specified and directed.
M&L for Reinforcement concrete M-25 (20 mm graded aggregates) as in beams, cantileveres, bressummers, lintels over 1.5 m span complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 200 mm thick (Horizontal or slopping) complete all as specified and directed.
M&L for reinforced cement concrete ( M-25) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for form work to sides of pillers, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.
M&L for reinforced cement concrete (M-25) as in columns, pillars, piers, posts and struts complete all as specified and directed.
S&F mild steel TMT bars 06 to 08 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S&F mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc complete all as specified and directed.
M&L Brick work with sub class 'B' old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and directed.
Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
M&L for factory made chamfered edge 60mm Thick M-35 Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge Note:- Sand for bedding shall be measured and paid under respective item of BOQ
M&L 25 mm thick sand cushion under floor ,spreading and levelling in layers 25 mm thick complete all as specified and directed.
M& L for 100 mm thick PCC 1:4:8 type D-2, (using 40mm graded aggregate) complete all as specified and directed.
M& L for 50 mm thick cement concrete 1:3:6 type C-2(using 40mm graded stone aggregate) as in plinth protection. Finished surface even and fair without using extra cement, complete all as specified and directed.
M&L Glazed ceramic tiles, in verticle surface 350X250 X7mm / 450X300X7mm over and including 15mm thick rendering in cement mortar (1:4) and set & jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregate in foundation filling and mass concreate complete all as specified and directed.
Providing and laying dual charghed vitrified floor tiles of size 600 x 600x 600 mm and 10 mm thick in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 15mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(a)Size of Tile 600x600 mm
M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqmm, over and including 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match for repair & matched to existing floor tiles in patches complete all as specified and directed.
S&F for Maze Overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System complete all as specified and directed. (Make;- Jaquar Registered design no.276017 or eqv in Perryware , Hindware )
S&F for Single piece-WC with UF Soft Close Slim Seat Cover, Fixing Accessories, fccessories set and Dual flush Cistern incl. all Fittings, Size: 370x670x720 mm, S Trap-300mm complete all as specified and directed. (Make;- Jaquar Registered design LYS-WHT-38851S300UFSMN or eqv in Perryware , Hindware )
S&F in viterous china Table Top Basin with CP waste coupling, Size: 565x425x140mm complete all as specified and directed. (Make;- Jaquar Registered design KUS-WHT-35935 or eqv in Perryware , Hindware )
S&F for in Brass Chromium plated pillar cock with 450 mm long braided hoses complete all as specified and directed. (Make;- ESSCO cat part no APR 10101 or eqv in Perryware , Hindware )
S&F Brass Chromium plated Bib Cock with Wall Flange complete all as specified and directed. (Make;- Jaquar cat part no DRC-37037 or equivalent in Perryware /Hindware )
S&F Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.2 Meter Long Spirochrome flex tube & Wall Hook complete all as specified and directed. (Make;- Jaquar cat part no ALD-587 or equivalent in Perryware / Hindware)
S&F Grab bar 600mm Long, Stainless Steel complete all as specified & as directed (Make;- Jaquar cat part noACN-1101S or equivalent in Perryware / Hindware )
S&F Towel Ring Square with Round Flange complete all as specified & as directed (Make;- Jaquar cat part noACN-1121N or equivalent in Perryware / Hindware )
S&F Soap Dish Holder complete all as specified & as directed (Make;- Jaquar cat part No ACN-1131N or equivalent in Perryware / Hindware)
S&F For Toilet paper Holder with Stainless Steel Flap complete all as specified & as directed (Make;- Jaquar cat part No ACN-1153S or eqv in Perryware , Hindware )
S&F Towel Rack 600mm Long with Lower Hangers, Stainless Steel complete all as specified & as directed (Make;- Jaquar cat part no ACN-1181S or eqv in Perryware , Hindware )
S&F for Corner Glass Shelf with Bracket Complete all as specified & as directed (Make;- Jaquar cat part no ACN-1173 or eqv in Perryware , Hindware )
S&F Brass Chromium plated Angular stop cock with wall flange complete all as specified and directed. (Make;- ESSCO cat part no APR 101053 or eqv in Perryware , Hindware )
S&F as vitreous china squatting pan (Orissa pattern) water closet (white) size 580mmx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified and directed.
S&F of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density or PVC 32mm dia for LLFC fixed complete all as specified and directed.
M&L for PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S&F Glass Shelf 550mm long complete all as specified & as directed (Make;- Jaquar cat part no AQN-7771
S&F 25mm dia nickel plated M.S Pipe curtain Rod with nickel plated brackets& Decorative end cap Complete all as specified & as Directed
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete all as specified and directed.
Providing and fixing 20 mm thick gang saw cut Granite of any colour and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified and directed.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete all as specified and directed of Engineer in Charge.
25 mm bore
20 mm bore
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position with 25 mm ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position complete all as specified in SSR part - I and directed.
Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame). complete all as specified and directed.
Taking down chowkats or frames exc. 1.5 sqm but not exc. 4 sqm each (without taking off shutters from frames) complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood( hollock ) factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces size of members as per IS 1003 Pt - I complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood ( hollock ) made of kiln seasoned and chemically pressure treated 2nd class HW factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, and sizes of members of shutters is as specified in clause No. 8.24 (b) of MES SSR Part I. complete all as specified and directed.
S & F of factory made steel window with side hung shutteers including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.
All as per item No 64 above but without glazing bars.
S&F steel ventilator with top hung shutter including hinges,steel peg stay, handle complete all as specified and directed.
M&L for Sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n. exc 0.50 sqm in each pane complete all as specified and directed.
S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheeet reinforced with m.s. squre tube as per specification and drawing given on MES SSR Pt-II, complete all as specified and directed.
Supplying & fixing of 30mm thick (style thickness) factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification and drawing given on MES SSR Part -II and Particular specification complete all as specified and directed. Doors shall be of make :- Rajshri Plastiwood / Sintex /Rotomould / Rotomatic..
S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified and directed..
S&F Rolled mild steel in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Door, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete using FE-410-W (Gde- E-250. complete all as specified and directed.
S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified and directed.
S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified and directed. .
S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified and directed.
S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed complete all as specified and directed.
S&F stainess steel wire cloth 0.36 mm nominal dia if wire and average width of aperature 1.40 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
S&F Sheet glass 5.50mm thick ordinary quility and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.
M& L for painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer including preparation of surfaces complete all as specified and directed.
M&L for preparation of new or untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Cutting holes exc 150 sqcm but n.exc 400 sq cm into or through brick walls, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
S & F Fe 410-W (Gde E-250)) quality B rolled mild steel in Joist channel, angle or tee,I sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified and directed.
S&F Rolled mild steel in Rolled section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connection plates using FE-410-W (Gde- E-250 complete all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified and directed..
Supply and fixing anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminum angle of size 40 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board of make Armstrong in fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification complete all as specified and as directed by Engineer-in-Charge.
M&L for one coats of synthetic enamel paint on old treated surfaces of wood of any description, not otherwise described, over 10 cm width or girth including preparation of surfaces.
M&L for one coat of synthetic enamel paint on old treated surfaces of steel or iron of any description, not exc. 10 cm width or girth when unconnected with other painting or when painted in different tint, including preparation of surfaces.
Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified and directed.
M& L for Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation fitting and mass concrete complete all as specified and directed.
M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&FRolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates rolled mild steel work as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'B' complete all as specified & as directed .
Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified and directed. (also including the rate for disposal of building rubbish/ malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead upto 1km for all lifts) complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type -B-1(using 20mm graded stone aggregate) in roof covering , benching , etc & finished even and rough complete all as specified and directed.
M&L for screed bed or bedding layer of 15 mm thick cement mortar 1:4, for floor finished even & smooth without using extra cement complete all as specified & directed (mixed with WPC & paid seprately)
Supply only water proofing compound ISI marked complete all as specified and directed.
M&L for Preparing surface for roof treatment by removing all looase gravel ,dirt ,oil & foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application ,provide 75X75mm coving made out of PMC mortar as above on all joints of vertical up stands to ensure does not exceed 5% immediately before application of liquid membrane material incorporation & protection to be provided ,applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm with 1st coat appllied in water ratio (ratio elastomeric liquid water proofing membrane :water will be 3:1) as primer, after the 1st coat is completly dry becomes slightly darker than apply 2nd coat with undiluted elastomeric water proofing liquid in criss -cross direction with roller .spread glass fibre mesh reinforcement of 1mm thickness with overlap of 50mm in both direction when the surface is still tacky . After the drying of of 2nd coat completly apply the final coat of undiluted elastomeric water proofing liquid in a direction parpendicular to previous coat .the min. thickness of dry film of complete application should not be less than the as recommanded by manufacture. the overall dry thickness should not be in any case less than 1.5mm complete all as specified & as directed.
Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc, any thickness, jointed in any mortar complete all as specified and directed.
M&L for sand stone slabs 10 cm thick in sun shades, chajjas, shelves, cills, landings slab, cover stones, templates, etc. n. exc. 2 m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed.
M&L for 40 mm thick Sikandra stone jali decorative design of approved pattern by Eng-in-charge including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified and directed. of Engineer in-charge.
M&L for removing excavated materials n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point in soils complete all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/ loose soil complete all as specified and directed.
M&L for 150 mm bore reinforced cement concrete pipe , class NP-2 laid & jointed complete with collars in cm(1:1) with spun yarn & tested . Complete all as specified & directed.
M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed.
S&F stone pillars(post) of size 100x100 mm including engraving decorative design of approved pattern on two face and dome shape approved by Eng-In-charge , height of each post as per sikandra stone jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified and directed of Engineer in-charge.
Excavation in trenches not exc 1.5 M wide and not exc 1.5 M in depth for pipe line, etc in soft / loose soil getting out and levelling of bottom surface to required level complete all as specified and directed.
Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified and directed. (Note :- Punning thickness shall be measured.)
M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, size 16sqmm x 4core electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor complete all as specified and directed.
M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in rigid PVC conduit pipe size not less than 20mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size SS / MS shunken/metal flush box for mounting of flush type/modular fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but unsheathed copper earth continuity conductor (in green color) to common earth and connedcted to earth dolly complete all as specified and directed for the following :-
One light point controlled by one way switch.
One ceiling fan/wall fan/exhaust fan point controlled by one way switch.
One 3 pin 6 Amp socket point outlet on the same board with other switches
One 3 pin 6 Amp socket point outlet on the independent board
All as per item No 110 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly.
S&F ceiling rose surface bakelite three terminal ISI marked including suitable size of PVC board complete all as specified and directed.
S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified and directed.
S&F switch socket combination 2 in 1, 5 A flush type complete all as specified and directed.
S&F switch socket combination 3 pin 16A, flush type complete all as specified and directed.
M&L submain wiring complete with 2X 6 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor and one run of 6 Sqmm copper cable for earth continuity conductor and including rigid PVC conduit with all PVC accessories fixed on concealed surface complete all as specified and directed. Note : Two runs of 6 sqmm, one run of 6Sqmm earth conductor and PVC conduit pipe shall be measured as one leangth only.
M& L for distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt complete all as specified and directed of the following DBs.
4 way TPN with 200 amps rated busbar 415 volts (double door type).
8 way SPN with 200 amps rated busbar 240 volts (double door type).
S&F MCCB/MCB 415/240 volts fixed in DB's of the undermentioned type and rating. Note: Make of MCCB/MCB should be same of DB.
MCB TPN 63 Amps 415 volt, Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
MCB SPN 40 Amps, 240 volt,Category- C curve, 10kA rapturing capacity ( ISI marked IS-8828)
Supply and fixing LED 20 watt LED tubelight fitting retro fit type 4 feet long with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified and directed. make: Cromption or equivelent in Phillips/Surya/Helonix/Havells
Supply and fixing in repair LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete
S & F street light GI bracket of 1.2 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole as directed.
Supply & fix 35/36 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP66 with 10KV surge protection road way,luminaire with high power LED as light source and suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor from fittings to the ceiling rose and fixing to complete all as specified and directed. Cat No-LSTS-25-CDL/NL-M Make:-Cromption or equivelent in Havells/Helonix/Surya
M&L bracket light fitting wall mounting, champagne gold finish fixture with plastic body suitable for 14 W LED lamp B22 base. complete all as specified and directed by Engr-in-charge. Cat No- LHFOECE1TZ10014 Make: Havells or equivelent in Cromption/ Bajaj etc
S&F LED mirror light fitting 1 x 9 W 230 volts attractive wall / ceiling mounted type with decorative grey end caps, polycarbonate body and ribbed opal diffuser.matallic channel and white refelector suitabale for mirrior fitting,complete with all accessoris prewired and including connecting up with twin core twisted flexible copper conductor cable 0.5 sqmm size complete all as specified and directed. Make -Havells Code No LHEXARP6PN1W009 or equivalent in Philips/Crompton/ bajaj
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250m complete all as specified and directed.
S&F ceiling fan (white) of 1200 mm sweep, 5 star rating copper wound with super energy efficient BLDC motor including remot,connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor canopy set, down rod, shackle kit, including all standard accessories complete all as specified and as directed by Engineer -in-charge . Model No- Efficiencia Neo of Make:-Havells or equivalent in cromption/ orient/Bajaj etc
Supply and fixing of Lithium base Energy efficient integrated Solar street light of 36 watt in single FRP body duly polyurethane coating (Camouflage color), encases with monocrystalline solar PV panel of 65-67Wp,lithium battery 11.1/12.8V,33.0 AH with inbuilt BMS,IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminium reflector for better light distribution ,CRI>70, color temp 5700K-6500K Microcontroller based charge controller cum driver,automaticdimming function(First 04 hrs at full brightness & rest of the time at lower light level with PIR motion sensor), Dusk to dawn operation,suitable to working temp (-) 10C to (+) 55C ,weight not more thatn 16-18 Kg with adjustable MS clamp suitable for pole/wall mounting etc complete as reequired complete all as specified and directed. Make: AXXON/HAVELLS/PHILLIPS Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint. Note : (Excavation & earth work shall be measured paid separately under respective item of BOQ)
Supply & laying 50mm GI pipe medium grade with all fittings laid in trenches in old/new position complete all as specified and directed. Note: Quoted rate deemed to be include the rate of connection to main DI pipe line with clamp & fittings.
Supply & laying 25mm GI pipe medium grade with all fittings laid in trenches in old/new position complete all as specified and directed. Note: Quoted rate deemed to be include the rate of connection to main DI pipe line with clamp & fittings.
Supplying & fixing gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778 of 50 mm bore complete all as specified and as directed at site by the Engineer-in-Charge.
Supplying & fixing gun metal gate valves with iron wheel head,screwed both ends for iron pipe, ISI Marked, as per IS: 778 of 25 mm bore complete all as specified and as directed at site by the Engineer-in-Charge.
M & L earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.65 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15 mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM sheet (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 2 Nos and with 8mm dia MS bar handle made to shape, GI pipe medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, complete all as specified in electrical plate No 3 of SSR Part I and connection to earth test point including testing on completion complete all as specified and directed. Note :- The cost of funnel pipe of 20 mm GI light grade pipe and protection pipe of 15mm bore GI light grade is deemed to be included in quoted unit rate.
Captainkomalchaharconstructions
PD GUPTA AND COMPANY
M/S MAMTA CONSTRUCTIONS
M/s Ranaji Construction Co
AMIT RISHABH BUILDERS PRIVATE LIMITED
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .