Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-Finance | L1 | Accepted-Finance Lowest One | |
| 2 | L2₹25.6 L+₹1.0 L (4.19%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest | |
| 3 | L3₹25.9 L+₹1.4 L (5.60%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L3 | Rejected-Finance Other than Lowest | |
| 4 | L4₹26.9 L+₹2.3 L (9.41%)Rejected-Finance ROOM NO A 46 GALI NO 11 GANESH MURTHY NAGAR PART NO 3 CAPT PRAKASH PETHE MARG CUFFE PARADE COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than Lowest | |
| 5 | L5₹27.8 L+₹3.3 L (13.4%)Rejected-Finance ROOM NO 997 GALI NO 3 PART NO 3 GANESH MURTHY NAGAR CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹79,980
Closing Date
31 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
DR HOMI BHABHA ROAD NEW NAVY NAGAR COLABA MUMBAI-05
DAY TO DAY MAINT INTERNAL PERIODICAL SERVICES AND CERTAIN MAINT WORK AT WNC O MESS AND IMSC AT NOFRA UNDER GE NW NOFRA COLABA MUMBAI
2022_MES_545312_1
8032
Open Tender
Civil Works
Item Rate
240 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹79,980
Yes
13 Sept 2022
13 Aug 2022
5 Sept 2022
13 Aug 2022
31 Aug 2022
26 Aug 2022
13 Aug 2022 - 25 Aug 2022
Amount
Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth POP/Putty finish as required pruning 3mm thick strictly as per manufacture instruction with smooth roller finish ,complete all as specified and directed by Engineer in charge. (Note : After painting ,cleaning of all floors, glass & furniture by contractor's arrangement). MAKE: (a) Paint : Asian paint Tractor Uno Acrylic Distemper or its equivalant in nerolac / Berger. (b) Putty : Berger waterproofing wall putty or Asian Trucore acralyic wall putty or Birla. (c) Primer : Asian or Berger or Nerolac.
Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of Ceiling including scrapping and applying one coats of oil bound distemper,complete all as specified and directed by Engineer in charge. (Note : After painting ,cleaning of all floors, glass & furniture by contractor's arrangement).
Material & Labour for prerparation of old plastered wall surface by chalk whitening and applying two coats of white wash ,complete all as specified and directed by Engineer in charge. MAKE : Surya Cem or Asian Paint or Nerolac.
Material & Labour for prerparation of old plastered Ceiling surface by chalk whitening and applying one coats of white wash ,complete all as specified and directed by Engineer in charge. MAKE : Surya Cem or Asian Paint or Nerolac.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer in charge.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer in charge.
M&L Preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer etc complete all as specified and directed by Engineer in charge.
M&L for rendering 15mm thick CM 1:6 on fair faces of brick work and finished even and smooth without using extra cement including taking down existing cement plaster on brick wall complete all as specified and directed by Engineer in charge.
M&L for rendering 10 mm thick cement plastering on brick or concrete surfaces in CM (1:4) finished even and smooth without using extra cement including taking down existing cement plaster on ceiling complete all as specified and directed by Engineer in charge.
M&L preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified. MAKE : Asain Pain Tractor uno or Berger Bison or equivalant in narolac.
M&L preparation of new plastered or unplastered surfaces of Ceiling including scrapping and applying two coats of oil bound distemper over layer of smooth Putty finish as required punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified. MAKE : Asain Pain Tractor uno or Berger Bison or equivalant in narolac
M&L two coats of french polishing on wooden surfaces of any description width or girth including cleaning and prepairing the surfaces including a coat of wood filler on old surfaces complete all as specified and directed by Engineer in charge.
M & L for complete removal of existing treatment by scraping down wall surfaces and applying 3mm thick wall care putty on wall and applying two coats of 'Lustre' paint of approved quality with Priming with alkali- resistant primer on wall etc complete all as specified and directed. Make - Putty : Berger Waterproof Putty, Luster Paint : Berger, Asian
Taking down shutter of any description EACH exceeding 1.00 SQM but not exceeding 2.00 SQM each.
Taking down shutter of any description EACH not exceeding 1SQM EACH.
Taking down chowkhats or frame with shutters (without taking off shutters from frame) EACH not exceeding 1.50 SQM EACH.
Taking down chowkhats or frame with shutters (without taking off shutters from frame) exceeding 1.50 SQM but not exceeding 4 SQM EACH.
Refixing the shutters exc 1 SQM but not.exc 2 SQM EACH in same opening EACH.which includes taking down easing and adjusting & also refixing builders hardware as required including renewal of unserviceable screws, etc.
S&F II class HW plain solid straight chowkat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints
S&F 40mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veeners with lipping / frame to match complete all as specified and directed.
S&F 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for windows and ventilator all as specified in SSR Part-I.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.
S&F hold fasts and similar small articles conforming to Fe 410-0or 310-3.
M & L for cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as in hold fast block etc.
S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy
S&F Aluminum anodized barrel tower bolt of extruded section 200mm long
S&F Aluminium alloy anodised barrel tower bolt 100mm long.
S&F extruded aluminium alloy handle fabricated type anodized 100mm long.
S&F extruded aluminium alloy handle fabricated type anodized 125mm long.
S&F 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed. Make : Jindal or Hindalco or Deco
S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed . Make : Jindal or Hindalco or Deco
S&F stainless steel butt hinges of size 100mm all as specified and directed.
S&F 75mm size stainless steel, butt hinges type B-22 complete
Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads.
S&F 5.5mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed
S&F 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and as directed
S&F Aluminium wire cloth 0.45mm nominal dia of wire and average width of operature 1.40mm and fixed to Wooden / aluminium Vent/window all as specified and directed Engr-in-charge cost of wooden/ aluminium beads and neoprene included in relevant item of aluminium window) in repairs.
M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer.
S&F in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.
S&F powder coated (50Micron minimum thickness) aluminum frame & shutter for door ,windows,ventilators etc.with one or more rebates including jointing cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws, sliding rollers, Rubber gasket etc.compleate all as specified compleate all as specified. Note:a)Glazing shall be measured seperately. b)Item shall be paid as per weight of alluminium section.c)the rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.
S&F door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew all as specified
S&F 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws.
Dismantling boarding, any description, fixed in any position with nails.
M&L for 12 mm thick commercial plywood (IS), grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges complete all as specified and directed.
M&L for 18 mm thick commercial plywood (IS), grade BWR,Type-BB fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges complete all as specified and directed.
M&L 0.9mm thick decorative laminate type 1, of surface finish, colcur and pattern as approved, fixed with approved adhesive as per maker's instructions.
Supply and fixing Godrej night latch seven levers suitable for 35mm to 45mm thick doors in repairs.
Taking down CI pipe/AC/PVC of any dia fixed to walls.
S&F CI soil, waste pipe 100mm dia sand cast iron any length with or without ears with cement joint fixed to walll etc complete.
S&F CI soil waste pipe 75mm dia fixed in cement jointed fixed to walll etc complete all as specified.
S&F in repairs 100 mm dia sand cast CI bends (any radius) with oval access door and jointed with neat cement paste .
S&F in repairs 75 mm dia sand cast CI bends (any radius) with oval access door and jointed with neat cement paste .
S&F CI branch pieces/connector single 100mm dia in repairs.
S&F CI branch pieces/connector single 75mm dia in repairs.
S&F 160mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height, any location, any floor including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.
S&F 160mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
S&F 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 100 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer In Charge
Supply and fix 75 mm dia Cast iron Nahni trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) & making good all as specified & directed by Engineer In Charge
S&F in repairs PVC low level flushing cistem including brackets 10 litre capacity COMMANDER champion or equvalent make in repairs.
S&F in repaires 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed Make : Gem/Soma/Parko/Seiko)
S&F stainless steel toilet paper holder fixed to walls in repairs with chromium plated brass screws complete.
S&F in repaires PVC connections 15mm dia size and 450mm long
S&F in repair wash hand basin vitreous china white flat back or angle type of size 580mmx450mm including waste chain and plug and porcelain stopper, a pair of brackets or errecting stand and etc. complete all as specified and directed.
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover including connection to drowm pipe and flushing pipe all as specified.
S&F in repairs, Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.
S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe
S&F in repair 32mm dia brass chromium plated waste coupling for wash hand basins fixed in repair complete
Supply and fixing flush handle suitable for low level flushing cistern of 10 ltrs capacity in repairs.
Supply and fixing 32mm dia PVC (flexible) waste pipe for wash hand basin complete in repairs.
S&F in repairs Aluminium anodised towell rail 20mm dia D type 60cm long between flanges .
S&F in repairs stainless steel grating cover 100mm dia fixed in repairs complete
S&F in repairs PVC cabinet mirror of size 300 x 450 mm complete all as specified and directed.
Supply and fixing in repairs bib tap 15 mm dia ,CP cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed
Supply and fixing in repair wall mixer,wall mounted with bend and over head shower all as per Cat Part No MSH 1141(for mixer) MSR 1090 (Over head shower) and MSH 1260 (Shower arm) of MARC or is Equvalent in Plumber,ESS- ESS.
Supply and fixing in repairs over head shower rose . Make : Cat Part No. MARC MSR-1050 from MARC or equvalant in make Plumber,ESS- ESS.
Supply and fix in repair chromium plated brass health faucet (hand shower) with 8 mm dia with 1 mtr long flexibale tube wall mounted / hooked all as per Cat Part No 573 of Jaquar or equvalent in Make MARC,Plumber.
Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray complete all as specified.
Supply and fixing mild steel in flat iron or rounded bars in available length any size including dismantling complete all as specified and directed.
M&L for DGVT vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge
M & L for DGVT vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm including 10mm thick backing layer of CM 1:4 for laying floor finishes on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge
M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge
M & L Glazed ceramic tiles in vertical surfaces of size 300x200mmx7mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge
M & L Polished granite stone slab 16 to 18mm thick coloured as in cooking platform/door sills ,floors and vertical surfaces set and jointed with grey cement slurry including screed bed of 15mm thick in CM 1:4, and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges all as specified and as directed by EIC complete. Note : Quality of granite all as approved by GE
M&L Marble Baroda green 18 to 20 mm thick (table rubbed and polishing) as in skirting/dado/ window cills/ jambs, coocking platform,steps and risers,vertical surface over cement rendering and jointed with grey cement,over and including screed bed of 15mm thick in CM 1:4,including pointing in white cement (1:2)using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner as directed by Engr-in-charge complete.
Dismantling of stone slabs and tiles of any descriptionn or thickness kin floors, aprons etc.
Nagma Enterprises
SN CONSTRUCTION
jkconstruction
satguruenterprises
SHRI SAI ENTERPRISES
Unitech Enterprises
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .