WELCOME MAINT FOR MD ACCN OF OFFRS AND JOCS ORS LOCATED AT SECTOR 28D AND 29D FAFA AT CHANDIGARH UNDER GE CHANDIGARH.

Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc upto 15 mtr height complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips upto 15 mtr height including necessary scaffolding and safety precaution and fixing new ones complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect.

Rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling at any position including necessary scafolding work finished fair & even without using extra cement complete all as specified and directed.

Rendering 10 mm thick in cement mortar 1:6 over brick work or concrete surface finished even and smooth without using extra cement at any height and providing necessary scaffolding, safety precaution and other requisite arrangement complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:4 over brick work or concrete surface finished even and smooth without using extra cement upto 15 mtr height and providing necessary scaffolding, safety precaution and other requisite arrangement without using extra cement mixed with water proofing compound as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound ISI Marked complete all as specified and directed.

(a) Complete removal of existing treatment, scrapping and sanding on ceiling surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/ 9" using 80 grid sanding paper to make the surface free from dust by skilled labour complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. (b) Material and labour for two coats of cement based wall care putty over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty (c) Material and labour for one coat of waterproofing primer/ damp proofing @ 1 ltr per 50 sqft. diluted with 30% by water to be applied using roller. (d) Allow 4-6 hrs to dry the surface for painting of subsequent coats. (e) Material and labour for applying two coats of interior acrylic emulsion paint on ceiling using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach area and penetration of acrylic emulsion on the surface at any height complete all as specified and directed.

(a) Preparation of new surface of ceiling by scrapping and sanding surface with mechanical wall sander ( having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/9" using 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed. (b) Material and labour for two coats of water based wall care putty over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty (c) Appliying one coat of waterproofing primer/ damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using roller. (d) Allow 4-6 hrs to dry the surface for painting of subsequent coats. (e) Material and labour for applying two coats of interior acrylic emulsion paint on ceiling using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach area and penetration of acrylic emulsion on the surface at any height complete all as specified and directed.

(a) Complete removal of existing treatment, scrapping and sanding on internal walls surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/ 9" using 80 grid sanding paper to make the surface free from dust by skilled labour complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect. (b) Material and labour for two coats of cement based wall care putty over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty (c) Material and labour for one coat of waterproofing primer/ damp proofing @ 1 ltr per 50 sqft. diluted with 30% by water to be applied using roller. (d) Allow 4-6 hrs to dry the surface for painting of subsequent coats. (e) Material and labour for applying two coats of interior acrylic emulsion paint on internal wall using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach area and penetration of acrylic emulsion on the surface at any height complete all as specified and directed.

(a) Preparation of newly plastered walls by scrapping and sanding with mechanical wall sander ( having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of diameter of 7"/9" using 80 grit sanding paper to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed. (b) Material and labour for two coats of water based wall care putty over the prepared wall surface @ 1kg per sqm by mixing the putty powder by adding water as per manufacturer instructions and mixing it in putty mixer with a capacity of mixing 40 kg putty in single go. The putty mixer should have variable speed functioning for preparation of smooth and lump free putty (c) Appliying one coat of waterproofing primer/ damp-proof primer @ 1 Itr per 50 sqft. diluted with 30 % by water to be applied using roller. (d) Allow 4-6 hrs to dry the surface for painting of subsequent coats. (e) Material and labour for applying two coats of interior acrylic emulsion paint on internal wall using roller and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying acrylic emulsion should be able to hard-to-reach area and penetration of acrylic emulsion on the surface at any height complete all as specified and directed.