Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-Finance | L1 | Accepted-Finance Being lowest | |
| 2 | L2₹35.5 L+₹1.5 L (4.55%)Rejected-Finance 26 8 2 PUNE MUMBAI ROAD OPP B U BHANDARI SHOWROOM EKTA PARK SOCIETY WAKDEWADI PUNE 411 003 | PUNE | MAHARASHTRA | 411003 | L2 | Rejected-Finance not being lowest | |
| 3 | L3₹37.6 L+₹3.6 L (10.7%)Rejected-Finance | L3 | Rejected-Finance not being lowest |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
25 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (CME) Khadki
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi, Kendriya vidyalay Gate , beside Unlimited (Mega Mart) Mall, Pune - 411 012
ADDN/ALTN TO IMPROVE THE BATHROOM AND TOILET OF CERTAIN BLDG AT 269 ENGR REGT, LADIES TOILET IN ADM WING AND PROVN OF TOILET FOR OFFRS/JCOS/OR AT BALLEY SUSPENSION TRG AREA OF BR HARD AT CME
2023_MES_582293_2
8406/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (CME) Khadki
Class D, category a(i) and also refer tender document
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer (CME) Khadki
₹87,300
Yes
28 Apr 2023
1 Apr 2023
27 Apr 2023
1 Apr 2023
25 Apr 2023
12 Apr 2023
2 Apr 2023 - 11 Apr 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 sqm but not exc. 4.0 sqm each complete all as specified and directed.
Taking down chowkats or frames, not exc. 1.50 sqm with shutters (without taking off shutters from the frames), complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put to gether with glue pinned at joints complete all as specified and directed.
Taking down shutters of size exc. 1.00 sqm but not exceeding 4.00 sqm all as directed.
S & F mild steel works as in bands, straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed.
M & L preparing surface of iron and steel, treating small articles such as stop, covers, gully grating, holdfasts, end of posts area exc. 0.1 Sqm each treated with tar or coal tar black paint complete all as specified and directed.
M & L cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.
M&L for preparing new wood and wood based surfaces of any description, over 100mm width or girth and applying two coats of synthetic enamel paint (First quality) over a coat of pink primer, complete all as specified and directed.
S&F PVC solid door frame of size 50X47mm made out of 5.0mm plain colour PVC sheet reinforced with mild steel square tube as specified manufacturer’s instructions complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed.
M&L preparing old steel and iron surfaces of any descriptions, over 100mm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
S & F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S & F 150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.
S&F 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks of mild steel wire staples, fixing and repair etc, complete all as specified and directed.
S&F aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as specified and directed.
S&F aluminium powder coated sliding partition with frame of size 101.6mm x 44.45mmx1.27mm thick and 101.60mmx 44.45mmx 1.20mm thick with total height 3.20m. The panels shall be made out of 5mm thick plain /tinted (frosted) glass in top & bottm of 12 mm thick both side laminated particle board (i.e 50-50) including door with accessories i.e floor spring, hydraulic door closer, butt hinges, handle tower bolt, necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screw etc including making good to the disturbed portion complete including taking down existing old partition all as specified and directed.
M& L 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.
Roundidng to edges of stone slabs, such as in steps, cooking platform and other similar situation complete all as specified and directed.
M&L 15mm thick cement plastering on block/stone masonry surfaces in CM 1:4 finishing the surface even and smooth without using extra cement complete all as specified and directed.
Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key, scrubbing down with water all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceedidng 15cm thickness (below or above ground level) all as specified and directed.
M&L 75mm thick PCC type D-2 (1:4:8) using 40mm graded stone aggregate as in sub base etc complete all as specified and directed
M&L For 25 mm thick, type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base etc complete all as specified and directed.
M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor/ wall finishes in CM 1:6. complete all as specified and directed.
S & F coloured non-skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed.
M& L rendering 10mm thick cement mortar in 1:4 as in backing coat for fixing wall tiles complete all as specified and directed
M&L glazed ceramic coloured tiles in vertical surface 350mmx250mmx7mm /450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat complete all as specified and directed.
S & F 15mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees, union etc and fixed complete to walls and ceilings or laid in floors including taking down existing u/s pipe complete all as specified and directed.
S & F 20mm dia steel water tubing medium grade galvanized with and including all fittings such as bend, tees , union etc and fixed complete to walls and ceilings or laid in floors including taking down existing U/s pipe complete all as specified and directed.
Cutting chases, pining in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chasesfor concealed water tubing and making good, cutting not exc. 10cm girth in brick walls all as directed.
Dismantling stone slab and tiles of any description and thickness as in floor including cement mortar bedding and rubbish off the premisses complete all as specified and directed.
M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling old pipe complete all as specified and directed.
S & F 110 mm dia PVC (SWR) bends any radius, provided with access door complete as specified and directed by Engr-in-Charge.
S & F in repairs PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete as specified and directed
S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, provided with access door complete as specified and directed
S & F in reparis 75 mm dia PVC (SWR) bends any radius provided with access door complete all as specified and directed.
S & F in repairs PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete as specified and directed.
S & F in repairs PVC (SWR) junction single (single T) equal or unequal 75mm bore, provided with access door complete as specified and directed.
Demolition of brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
S&F vitreous China urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including spreader etc. complete all as specified and directed.
M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying complete ceiling with 3mm POP/wall putty for making smooth surface and applying three coats of white wash complete all as specified and directed.
M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed.
M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflourescent, salts and applying complete wall with 3mm POP/wall putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed.
M&L preparing newly plastered surfaces of wall and applying complete wall with POP/wall putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed.
S & F in repair table top wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling chain and plug waste fitting union and 32mm dia PVC waste pipe 90cm long, all necessary inlet outlet connections complete all as specified and directed. Make : Hindware Cat No. 10065 or equivalent model in Cera /Parryware/ Neycer as approved by GE.
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (including fixing bolts, flushing cistern and flush pipe) including provision of flush pipe, plastic seat cover for pedestal pan and CP health faucet including two way angle cock complete all as specified and directed.
S&F in repair brass chromimum plated two way bib cock fancy type, 15mm bore ( min Wt. 550 grams) of approved make by EIC/ GE etc.complete all as specifed and as directed.
S & F in repair brass chromium plated, 15 mm bore health faucet, ( flexy type) 1.00 mtr. long of approved make by EIC/GE etc. complete all as specified and directed.
S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stain steel bracket guard and railing 60 cm long etc. complete all as specified and directed.
S&F in repair 15mm dia concealed stop valve chromium fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.
S & F in repair soap dish holder stainless steel complete all as specified and directed by Engr-in-Charge. (Make : Jaquar)
S&F in repair Toilet paper holder stainless steel all as specified and directed.
S& F in repair brass CP mixer for mixing hot & cold water screwed down for15 mm size iron pipe and fixed all as specified and directed.
S&F vitreous china squatting pan "Orrisa Pattern" size 580x440mm white with integral foot rest (including flushing cistern) but including flush pipe, trap complete all as specified.
S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair overhead shower 100mm dia round shape single flow (ABS body chromium plated with grey face plate) with Rabit cleaning system complete fixed to ceiling complete all as specified and directed. Make : Jaquar Cat No. DHS-1989 or equivalent approved
M&L cement concrete type E-2, 1:5:10 (40 mm graded stone aggregate) lean concrete as in sunkun floor for filling etc. complete all as specified and directed.
M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sunkun floor complete all as specified and directed.
M&L 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.
Supplied only integral WPC all as specified and directed.
M&L bitumen blown any grade applied hot, two coats to concrete surfaces at the rate of 1.5 kg per sqm per coat complete all as specified and directed.
M&L Polythene film black 50 micron laid in floor complete all as specified and directed.
S& F in repair wash hand basin mixer complete all as specified and directed.
S & F 30mm thick flush shutter, solid core construction with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
Excavation over areas 1.50m in depth for foundation etc or for shaft, wells, cesspits, manholes , pier holes etc n exc 10 Sqm on plan and not exc 1.50 m in depth and getting out in any type of soil complete all as specified and directed.
Excavation over areas for depth beyond 1.50 mtr in hard dense soil and getting out complete all as specified and directed.
M & L for 150mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base / flooring complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M & L for Brick work with sub class 'B ' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
M & L for Brick work with fly ash bricks straight or cURVED on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed.
Loose filling with broken bricks,aggregates of gauge 80 to 150 mm in sokage well all as specified and directed.
M & L for RCC-M-20 using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballasts wall and the like any thickness above top of footing including attached pilasters and buttresses all as specified and directed.
M & L for RCC M 20 using 20mm graded stone aggregete as in slab supported on walls, beams and columns in floor, roof landing, balconies, canopies, deck slab and in shelves and the like complete all as specified and directed.
Use & Waste of form works to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work, rough finished surfaces not exceeding 200mm thick, all as specified and directed.
Use & Waste of form works to edges of concrete flats, treeds , breaks in floor, window cill, concrete, opening in concrete walls floor and roof not exc. 20cm wide and sides of RCC / PCC bands in walls , horizontal or sloping and similar work exc 5 cm but not exc. 10 cm wide for rough finished concrete surface all as specified and directed.
M & L mild steel deformed bars 6-8mm dia and over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire not less that 0.9 mm dia or securing with clips complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate ) as in bands complete all as specified and directed.
M & L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement all as specified and directed.
S&F cast iron soil, waste and vent pipes, in any length with or without ears with cement joints fixed to walls 75 mm dia bore sand cast pipes all as specified and directed.
Returning, filling in, including spreading, levelling, watering & well ramming in layers not exc. 25cm thick in soil all as specified and directed.
Removing excavated soil material not exc. 50m & depositing where directed at a level not exc. 1.5m above the starting point all as specified and directed.
M&L salt glazed stone ware drain pipes 150 mm dia laid in trenches and jointed all as specified and directed.
Excavating in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sq m on plan and not exc. 1.5 m in depth and getting out in hard/ dense soil all as specified and as directed.
M&L fPCC block masonry with solid blocks in precast cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate, exc. 10 cm in width and setting CM 1:4 all as specified and directed.
M & L PCC 1:4:8, type D 2 as in concrete bed to drain pipes including forming cradles for 150 mm dia. of RCC pipe etc. complete all as specified and directed.
M & L 150 mm dia.of reinforced concrete pipes, class NP2, laid and jointed complete with collars all as specified and directed.
M & L plain cement concrete, 1:4:8, type D 2 ( using 40mm graded stone aggregate ) as in foundation and mass concrete etc. complete all as specified and directed.
M & L plain cement concrete 1:3:6, type C-2 in surface channels and drains etc. complete all as specified and directed.
M & L rendering 10mm thick on fair faces of brick work or concrete surfaces and making smooth and even surfaces without using extra cement in cement mortar 1:3 etc. complete all as specified and directed.
M & L PCC 1:3:6, type C-1 ( using 20 mm graded aggregate ) as copings etc. complete all as specified and directed.
M & L providing precast cement concrete 1:3:6, type C-1, ( using 20mm graded aggregate ) set in CM 1:6, as in man hole cover etc. complete all as specified and directed.
S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and directed.
Cutting hole in stone/block wall built in cement mortar of superficial area exc. 150 sq. cm but not exc. 400 sq. cm etc complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 cm, deep and getting out in hard/dense soil complete all as specified and directed.
M & L hardcore using broken stone boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.
Supply only fine aggregate (sand) for sand cushioning below interlocking paver block
M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade complete all as specified and directed.
M&L preparation of newly plastered or unplastered surfaces on wall and applying two coats of cement base paint complete all as specified and directed.
M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out cable etc for repairs / laying cables etc and getting out in soft/loose soil complete all as specified and directed by the Engineer-in-Charge.
Supply & fixing ball brass valves 20mm, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
Cutting 40/50mm bore existing steel tubing for alternations or additions of new pipe connection of 20mm bore with necessary Tee,bends etc all as specified and directed.
M&L RCC 1:2:4 type B-1, ( using 20 mm graded stone aggregate ) as in beams, cantilevers, bed block, bressummers, lintels over 1.5m span, including necessary form work etc. complete all as specified and directed.
M&L rendering 15mm thick on concrete surfaces in CM 1:6 finished even and smooth etc. complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for and complete all as specified and directed
S&F Framed work such as roof trusses (framed), trussed purlins, crane gantries , rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering complete all as specified and directed.
S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.
S & F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.
M & L preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed
S&F steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed.
S&F 5mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S & F pressed steel frames of size 105x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S& fix steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.
S & F Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, complete all as specified and directed.
M&L barrel tower bolts stove enamelled black of size 150 mm complete all as specified and directed.
S&F 150 mm long aluminium anodised handles of extruded section complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised , sliding door bolt with hasp , staple,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.
S&F vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling complete all as specified and directed.
S&F in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed.
S&F 15mm dia fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F 15mm dia stop valve chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend any radius complete all as specified and directed
S&F 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.
M&L 110mm bore PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F 1000 ltr. Capacity three layered rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as directed.
S&F 15/20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L RCC 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Moorum/red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L RCC 1:2:4 type B-1, (using 20 mm graded stone aggregate ) as in columns, pillars, piers, post and struts, including necessary form work etc. complete al as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, rough finished surface of concrete flat all as specified and directed.
S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe. 290 Gde-E-165 complete all as specified and directed.
Excavation in trenches, not exc. 1.5m wide and not exc. 1.5 m in depth for foundation etc. for shafts, wells, cesspits, manholes, pier holes etc. not exc. 10 sqm m plan and not exc. 1.5m in depth and getting out in soft/disintegrated rock complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc. complete all as specified and directed.
Material & labour for point wiring with FRLSH cable 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washer etc., sunk zinc coated pressed steel terminal boxes with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, PVC insulated solid copper conductor cable, unsheathed and connnected to common earth dolly complete all as specified and directed for the followings:-
One light point controlled by one switch
One exhaust fan point controlled by one switch and regulator
Socket outlet, three pin, 5 Amp, independent
Socket outlet, three pin 5 Amps on the same board
S & F ceiling rose, surface bakelite suitable for 3 pin, 230 Volt, 50 Hz, AC supply complete all as specified and directed
S & F switch piano, flush type, single pole one way 5 Amps complete all as specified and directed.
S & F socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed.
S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/ C & S / Bentec India Ltd./ Luker.
Supply & fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 Volt, 50 Hz, RPM 1200, copper winding of sweep 250mm all as specified and directed.
S & F sub main wiring approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 2.5 sq.mm nominal area and drawing into PVC conduit including PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor earth wire complete including taking down old existing wiring. Note: Two runs of 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC conduit will be measured as one unit.
Supply & fix in replacement DB 4 way SPN with 200 Amps rated bus bar, double door including wooden box suitable size. Make : Indoasian/ Schneider/ Siemens complete all as specified and directed.
S & F in replacement MCB SP 6 to 32 Amps, 230 V, AC complete all as specified and directed.
S & F in replacement MCB SPN 40 to 63 Amps, 230 V, AC complete all as specified and directed.
Supply & fix DB 4 way SPN with 200 amps rated bus bar, double door including wooden box suitable size. Make - Indoasian /Schneider/Siemens complete all as specified and directed.
S & F MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed.
S & F MCB SPN 40 to 63 Amps, 230 V, AC complete all as specified and directed.
S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 including suitable size bracket Make - Havells cat No. ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/ C & S / Bentec India Ltd./ Luker.
Supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaries, high efficiency diffuser for soft glare fee light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. Make : Cat Part No ENDURALINEARNEOBS20W LED865SPCWH of Havells or equivalent model in Wipro/CG/Bajaj.
M & L Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth of not less than 1.50 metre below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 using 20mm garded stone aggregate in cover and CI frame etc. complete all as specified and directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured , electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl using suitable clamp of cross sectional area 2 core 10 Sqmm all as specified and directed.
Supply & Laying of Telerex DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 50 mm and inner dia 38 mm polythylene with smoooth inernal and profiled external surface for non pressue under ground cable incl couplers & bends complete all as specified and directed.
Supplying and laying GI tubing light grade of size 40mm dia bore for encasing cables for mechanical protection, laid under plinth / floors/ paths culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/ sockets/ reducers/ saddles incl necessary threading/ drilling works all as specified and directed by Engr-in-charge.
vishalconstruction
N AND G CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .