Providing and fixing of Bus pipe system of both primary and secondary side of 2 no 3 MvA, 11KV/3.3KV transformer at 11Kv substation under Urimari OCP.

Amount

A.) 3 MVA 11KV/3.3KV power Transformer(Production) Cost of alloy aluminium pipe 48.3 mm dia inner dia 40.8 mm wall thickness 3.6mm

Cost of post insulator

Cost of Support connector

Cost of tee connector

Cost of pipe to pipe connector

Cost of Palm/ pad connector

Connector socket for transformer

Erection cost(item 1-7)

Erection of metallic pole of above 8.00 Mtr and upto 10.00 Mtr length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Supplying and erection of a set of cross bracing Frame work for 11KV overhead line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width x 2500 mm height, complete with 50mm x 6mm M.S. flat iron clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

B.) 3 MVA 11KV/3.3KV power Transformer(Domestic) Cost of alloy aluminium pipe 48.3 mm dia inner dia 40.8 mm wall thickness 3.6mm

Cost of post insulator

Cost of Support connector

Cost of tee connector

Cost of pipe to pipe connector

Cost of Palm/ pad connector

Connector socket for transformer

Erection cost(item 12-18)

Erection of metallic pole of above 8.00 Mtr and upto 10.00 Mtr length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required

Supplying and erection of a set of cross bracing Frame work for 11KV overhead line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width x 2500 mm height, complete with 50mm x 6mm M.S. flat iron clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Total impact of GST for the purpose of CTC

M/S RAJENDRA CIVIL AND ELECTRIC WORKS

M.k. Traders