Erection of Linkline and 1 No DP Switch for Bifurcation of Load from the Existing 11 KV Uthukuli Feeder of Uthukuli SS to the Existing 11 KV Kavundampalayam Feeder of 110 KV Uthukuli SS in respect of Rural Uthukuli Section

Supply and Erection of of 11 KV Three Phase Aerial Bunched Cable of size 3 X 95 + 1 X 95 sq mm with Accessories

Supply and Erection of End Termination Kit

Supply and Erection of Dead End Clamp / Anchor Clamp Assembly including Brackets, Pole Clamps

Transportation of all types and sizes of poles and other associated materials from road side to pole pit and vice versa upto 0.50 KM

Excavation & backfilling of pole pit for pole above 8.00 m length by using JCB / manual

Erection of RCC, REC, PSC pole above 8.00 m length by using crane / manual

Fixing of tapping channel cross arm

Fixing of V cross arm 3.5 feet

Fixing of HT / LT TI fitting

Fixing of HT disc 11 KV

Fixing of 11 KV porcelain pin insulator with pin or polymer composite pin insulator

Erection of 11 / 22 KV AB switch (Horizontal) with PT insulator

Fixing of double channel cross arm

Erection of cross bracing set

Erection of top channel for double pole DT structure

Erection of bed channel 2 Nos. for double pole DT structure

Erection of belting angle 2 Nos. for double pole DT structure

Fixing of HT LAS (3 Nos.)

HT jumpering complete for double pole structure

Excavation & backfilling of stay pit of 4.5 to 5 feet depth using JCB / Manual

Erection of stay set complete with fixing up stay wire Eye, Bow, Guy Shackle, Binding etc.

Paving and stringing of conductor of above 7/2.59 mm ACSR or other equivalent conductor upto 7/3.35 mm ACSR or other equivalent conductor (for Route Length per Phase)

Paving and stringing of conductor of 7/4.09 mm ACSR or other equivalent conductor (for Route Length per Phase)

Earthing of pole with GI wires 4 or 6 SWG by coil earthing

Structure earthing complete with 2 pits and earth loops for double pole structure

Mass concreting of pole with 1:4:8 mix using 40 mm jally including curing (material + labour) for a size of 0.45 x 0.45 x 1.2 m

Painting of all clamps and other iron materials and painting of structure pole for double pole structure

Yard cleaning and making uniform surface for double pole structure