Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC S 17 77 1 CHARAN NAGAR COLONY NADESAR VARANASI UTTAR PRADESH PIN 221002 | VARANASI | UTTAR PRADESH | 221002 | L1 | Accepted-AOC Lowest tender accepted | |
| 2 | L2₹15.3 L+₹7,050 (0.46%)Rejected-Finance | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹17.7 L+₹2.5 L (16.3%)Rejected-Finance NAGLA UDHA NEAR PRIMARY SCHOOL POST DHANOLI AGRA UP AGRA 282010 | AGRA | AGRA | UP | 282010 | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹19.9 L+₹4.7 L (30.9%)Rejected-Finance | L4 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
26 Feb 2022, 6:00 pmClosed
GE (AF) Adm Area Agra 282008
GE (AF) Adm Area Agra 282008
REPAIR MAINT AND REPLACEMENT OF ELECTRICAL PANELS DG SETS AND CERTAIN ALLIED WORKS UNDER GE AF ADM AREA AGRA
2022_MES_504718_1
8000-1923/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
AF Station Agra
Class E
cat b i
8 documents required · 8 mandatory
₹500
GE AF Adm Area Kheria Agra
₹50,000
Yes
26 Mar 2022
31 Jan 2022
28 Feb 2022
31 Jan 2022
26 Feb 2022
14 Feb 2022
31 Jan 2022 - 12 Feb 2022
Amount
M&L for painting of DG set, panels, diesel tank, silencer with two coats of synthetic enamel paint and writing SM No, MES No, Make and capacity after preparation of surface for 200 KVA to 320 KVA DG Set complete all as specified and directed.
All as per item No. 1 above but of capacity 100 KVA to 125 KVA
All as per item No. 1 above but of capacity 30 KVA to 82.5 KVA
M&L for servicing of 15 KVA to 40 KVA DG set by opening, adjusting, tightening of tappet cover complete using torque wrench by applying proper pressure, cleaning of complete sump from sludge, dirt, oil etc., replacing of fuel filter (Primary and secondary) and Oil filter and refitting for DG set including drain out (used) engine oil and filling and topping with new engine oil complete al as directed. Note:- (a) Engine oil will be measured and paid separately under respective items of BOQ. (b) Replacing of fuel filter and Oil filter shall deemed to be included in said item. All others spares required sall be measured and paid seperately as supply only.
All as per item No. 4 above but of capacity 62.5 KVA to 82.5 KVA
M&L for servicing of 100 to 125 KVA DG set by opening, adjusting, tightening of tappet cover complete using torque wrench by applying proper pressure, cleaning of complete sump from sludge, dirt, oil etc., replacing of fuel filter (Primary and secondary), super by pass filter and Oil filter and refitting for DG set including drain out (used) engine oil and filling and topping with new engine oil complete al as directed. Note:- (a) Engine oil will be measured and paid separately under respective items of BOQ. (b) Replacing of fuel filter, super by pass filter and Oil filter shall deemed to be included in said item. All others spares required sall be measured and paid seperately as supply only.
All as per item No. 6 above but of capacity 200 to 320 KVA
Supply only Engine oil 15 W40 complete all as specified and directed. Make :Castrol / HP / Bharat Petrolium.
Supply only coolant suitable for radiator of DG sets. Make: HP / TVS / Valvoline
Supply only distilled water suitable for lead acid battery of DG set complete all as specified and directed.
Supply only Air cleaner filter (inner & outer) to DG set for capacity 25 to 62.5 KVA complete all specified.
Supply only Air cleaner filter (inner & outer) to DG set for capacity 75 to 82.50 KVA complete all specified.
Supply only Air filter (inner & outer) to DG set for capacity from 100 to 125 KVA complete all as specified.
Supply only Air filter (inner & outer) to DG set for capacity from 200 to 320 KVA complete all as specified.
S&F in replacement of battery terminal brass(heavy duty)with nuts & bolts for battery (as per sample) complete all as specified.
S&F in replacement Engine RPM gauge meter for DG set complete all as specified and directed.
S&F in replacement V Belt / Fan belt suitable for DG set upto 125 KVA capacity complete all as specified and directed.
S&F in replacement fully automatic Battery charger input 230V AC (transformer based) and output 24V DC for 24 volt battery complete all as specified. Make :- AE / Micro Power / Elect India / Unitek India
S&F in replacement fully automatic Battery charger input 230V AC (SMPS based) and output 12V DC for 12 volt battery complete all as specified. Make:- AE / Kirloskar / Power India / Unitek India
S&F in replacement Under/ Over volt relay-ON/OFF delay time (1 to 10 sec), sensing supply 415 Volt complete all as specified. Make- AE / PIC / MINILEC
S&F in replacement A.V.R unit suitable for upto 125 KVA DG SET complete all as specified and directed. Make:- Kirloskar / AE / National
S&F in replacement AMF Controller device ( KG934 ) / (EMS927) for Auto/ Manual function suitable for all capacities of DG set complete all as specified and directed. Make: Automation Electronics / KIRLOSKAR / Greaves Cotton.
S&F in replacement Speed control unit ( MODEL-ESD5111) suitable for DG set complete all as specified and directed. Make: Automation Electronics / KIRLOSKAR / Greaves Cotton
Checking of AMF panel / DG set for detecting any kind of fault in AMF panel/DG set and attending the fault immediately at any time round the clock and carry out repair required as per site requirement and checking of AMF panel and DG set for power supply from DG set through AMF panel and replacing of worn out minor parts complete all as specified and directed.
S&F in replacement Diesel pipe suitable for all capacities of DG set complete all as specified and directed.
M&L for disconnection, dismantling and repairing of dynmo 12 / 24 Volts DC for battery charging from DG set engine including rewinding of armature, replacement of carbon brushes, replacement of bearings, rewinding of field coil assembly, replacement of connection plate etc, reassembling and refixing to DG set engine after necessary repair complete all as specified and directed.
S&F in replacement fuel water Separator suitable for all capacities of DG set complete all as specified and directed.
S&F in replacement Shut down valve solenoid suitable for all capacities of DG set complete all as specified and directed.
S&F in replacement Wiring harness upto 125 KVA complete all as specified and directed.
S&F in replacement Wiring harness upto 320 KVA complete all as specified and directed.
S&F in replacement Self Engine Stop Relay Device for DG set AMF panel complete all as specified and directed. Make: AE / Elect India or equivalent.
S&F in replacement A.V.R for 200 KVA to 320 KVA DG SET complete all as specified and directed. Make:- Kirloskar / AE / NATIONAL.
S&F in replacement Solenoid stopper 24 Volt DC suitable for upto 250 KVA DG set complete all as specified and directed. Make :--Cummins / Kirloskar / Greaves Cotton .
S&F in replacement Fuel filter cartridge duplex type suitable for upto 62.5 KVA DG set complete all as specified and directed.
S&F in replacement AMF control unit function for DG set complete all as specified and directed. Make: AE/ ELECT INDIA/ Unitek India
S&F in replacement VMR Box for AMF PANEL OF UPTO 250 KVA DG set complete all as specified and directed. Make: AE/ ELECT INDIA/ Unitek India
S&F in replacement fuel Feed pump suitable for upto 125 KVA DG set complete all as specified and directed.
S&F in replacement fuel Feed pump suitable for 200 to 320 KVA DG set complete all as specified and directed.
S&F in replacement Magnetic Pickup suitable for upto 125 KVA DG set complete all as specified and directed. Make:- Cummins / Kirloskar / Ashok Leyland
Taking down old repairable Radiator from 100 KVA to 125 KVA Capacity DG sets by opening nut/bolt from foundation, loading/unloading, transportation to and from local market, dismantling, checking, testing for any defects and repairing as below: - (i) Cleaning, washing the copper tubes and Top to bottom Copper Jal Frame of the radiator by acid process. (ii) Checking the leakage if any and repairing the same by doing the Soldering and testing radiator. (iii) Refixing to its original position with proper accuracy and correct alignment including replacement of nut/bolt, hose pipe sets with clamps and testing complete.
All as per itm No. 41 above but DG sets of capacity 200 KVA to 320 KVA
Disconnecting of self starter 24 volts/12 volts DC, dismantling and repairing with replacement of bendix pinion, rewinding of armature, bushes set, rewinding of field coil assembly, reassembling and refilled including testing of the complete self starter for DG Set of capacity upto 62.5 KVA complete all as specified and directed.
All as per itm No. 43 above but DG sets of capacity 100 to 125 KVA
All as per itm No. 43 above but DG sets of capacity 200 to 320 KVA
S&F in replacement Control Assembly relay card- 24 VDC/12 VDC for upto 200 KVA DG Set AMF Panel with checking of all connections etc. complete all as specified. Make:- Cummins / Kirloskar / Ashok Leyland/ Greaves Cotton .
S&F in replacement Injector Assembly suitable for upto 125 KVA DG set complete all as specified and directed.
All as per itm No. 47 above but DG sets of capacity 200 to 320 KVA
M&L for dismantling of Fuel Injector Pump (FIP) from DG set engine for capacity upto 125 KVA including repair and replacement of spare parts as required, overhauling, calibration complete and refixing to its original position properly including testing complete all as specified and directed. (Note:- Cost of materials such as Shaft governor weight carrier, Plunger governor, Gear governor and other required spares for repairing of FIP shall deemed to be included in quoted rates).
All as per itm No. 49 above but DG sets of capacity 200/250 KVA
All as per itm No. 49 above but DG sets of capacity 320 KVA
M&L for dismantling of Pressure Time pump (PT Pump) complete with replacement of drive accessories, plunger and barrel, weight/courier, oil sheets etc. including machinery work for upto 125 KVA DG set complete and refixing to its original position properly including testing complete all as specified and directed. (Note:- Cost of materials such as drive accessory, plunger, Air fuel control, oil seal and gasket set fuel pump required for repairing of Pump governor shall deemed to be included in quoted rates).
All as per itm No. 52 above but DG sets of capacity 200/250 KVA
All as per itm No. 52 above but DG sets of capacity 320 KVA
M&L for dismantling of defective water pump assembly for 200 to 320 KVA DG set by disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly including connected items suitable for 200 to 320 KVA DG set complete all as specified and directed. Make:- Cummins / Kirloskar / Ashok Leyland/ Greaves Cotton .
M& L for taking out of burnt Exciter unit assembly of alternator from 100/125 KVA DG set and rewinding of exciter unit with super enameled copper wire of existing gauge and quantity including tapping, varnishing, heating insulation material and testing complete including loading/ unloading and transportation to workshop complete all as specified and directed.
M&L for taking out burnt Field coil assembly of alternator from 100/125 KVA DG set and rewinding of field coil assembly with super enameled copper winding wire of existing gauge and quantity including supply and fixing of new slip ring and carbon brush assembly complete including loading/ unloading and transportation to workshop complete all as specified and directed.
M&L for dismantling of turbo charger for 200 KVA to 320 KVA DG set engine, repairing, overhauling and testing on complete and fixing to its original position properly complete all as specified and directed.(Note:- Cost of materials such as Kit Turbo, sleeve turbocharger and support turbocharger seal required for repairing of Turbo charger shall deemed to be included in quoted rates).
M&L for dismantling of defective water pump assembly for 125 KVA DG set by disconnecting of hose pipe connections, fanbelt, radiator connection and supply and fixing of new water pump assembly including connected items suitable for 125 KVA DG set complete all as specified and directed. Make:- Cummins / Kirloskar / Ashok Leyland/ Greaves Cotton .
Supply & fixing in replacement of Digital three phase volt-meter 96 x 96 mm flush mounted class accuracy 0.5 complete all as specified and directed. Make: AE/ HPL / National
Supply & fixing in replacement of Digital three phase Amp-meter 96 x 96 mm flush mounted class accuracy 0.5 complete all as specified and directed. Make: AE/ HPL / National
Supply & fixing in replacement of Digital three phase power factor-meter 96 x 96 mm flush mounted class accuracy +/- 0.01 complete all as specified and directed. Make: AE/ HPL / National
Supply & fixing in replacement of Indicator lamp with holder set of three colours of R, Y & B (LED type) complete all as specified and directed.
Supply & fixing in replacement of Battery- 12 Volts,180 Ah for DG set complete all as specified. Make: EXIDE Model FXP0-XP1800/ Amron Model HC180D04R/ Microtek/ Sonic.
S&F in replacement of contactor of 3 Pole, 400 Amps, for AMF panel of DG Set with replacement of lugs and checking of all electric connections etc. and testing after completion complete all as specified and directed. Make :- L&T/ Legrand/ Seimens.
All as per itm No. 65 above but 225 Amp
All as per itm No. 65 above but 150 Amps
All as per itm No. 65 above but 40 Amps
All as per itm No. 65 above but 100 Amps
S&F in replacement ON-LOAD Changeover switch (Open Execution, Front operated) of 63 Amps, 4 Pole, 415 V, 50 Hz complete all as specified and directed. Make: HPL / Havells/ L&T.
All as per itm No. 70 above but 200 Amp
All as per itm No. 70 above but 400 Amp
M&L for replacement of existing UNSV sign board with new sign board of size of 5 x 3 feet box type in cuboid shape made out of acrylic sheet on both side framed with stainless steel pipe including writing alphabatic letters of height 150 mm computerised with refelctive sheets providing LED 20 Watts tube light fitting - 02 Nos inside the box to be made all as directed and fixed with stainless steel pipe heavy duty 50 mm dia and to be fixed outside the installations including making all electric connections using 4 sqmm multi stranded aluminium cable as required at site duly burried in ground along with required PCC and top of the sign board should be 2.3 mtr above GL complete all as directed and specified. Note: Excavation, PCC removing extra soil etc. is deemed to be included in the rates quoted
Supply & fixing in replacement of MCCB, 100 Amp, 3 pole, 16 KA , 415 Volt with fixed type Ics= 100% Icu setting including suitable size copper spreaders as required complete all as specified and directed. Make:- Legrand Cat Ref DPX3 420005 or equivalent in L&T/ Seimens.
Supply & fixing in replacement of MCCB, 40 Amp, 3 pole, 16 KA , 415 Volt with fixed type Ics= 100% Icu setting including suitable size copper spreaders complete all as specified and directed. Make:- Legrand Cat Ref DPX3 420002 or equivalent to L&T/ Seimens.
Supply & fixing in replacement of MCCB, 63 Amp, 3 pole, 16 KA , 415 Volt with fixed type Ics= 100% Icu setting including suitable size incoming and outgoing copper spreaders complete all as specified and directed. Make:- Legrand Cat Ref DPX3 420003 or equivalent to L&T/ Seimens.
Supply & fixing in replacement of MCCB, 200 Amp, 3 pole, 36 KA , 415 Volt with fixed type Ics= 100% Icu setting including suitable size incoming and outgoing copper spreaders complete all as specified and directed. Make:- Legrand Cat Ref DPX3 420238 or equivalent to L&T/ Seimens.
Supply & fixing in replacement of MCCB, 250 Amp, 3 pole, 36 KA , 415 Volt with fixed type Ics= 100% Icu setting including suitable size incoming and outgoing copper spreaders complete all as specified and directed. Make:- Legrand Cat Ref DPX3 420239 or equivalent to L&T/ Seimens.
M&L in replacament of existing old unsv earthing complete with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Supply & fixing in replacement existing meters with digital Multi function meters of accuracy class 1, LED display, 3 Phase Voltage, Current, PF, KW, KVA, KVAR, KWH, KVAh, KVARh complete including all necessary cutting or all as required at site for fixing including making connections. Make:- HPL/ C&S Cat Ref CSM-A-M5-S3-C/ Seimens/ Legrand.
M & L for dismantling all electric/ water connections, shifting and re-installation, testing after making all electric/ water connections carefully with the help of required T& P/ crane / truck or any other mechanism for upto 100 KVA DG Set alongwith LT/ AMF Panel and other connected allied works from installation under GE(AF) Adm area, Agra complete all as required at site or as directed.
S&L including connecting XLPE LT UG cable PVC insulated, bedded armoured heavy duty electric cable 1100 volts grade with aluminum conductor of 50 Sqmm 4 core laid in trenches or fixed on wall/floor/poles including taking out/down old cable complete all as specified and directed.
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for laying for cables, errection of poles etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil including removal of sand, bricks/PCC covers laid for cable proection complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25 cm in any type of soil complete all as specified and directed.
Removing surplus excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for local sand cushioning with dry and clean over and under the cable for protection of cable, 80 mm sand laid before laying the cable 150 mm sand after laying the cable and punned down complete all as directed
Material and labour for old size fly ash bricks class designation 75 Kgf/cm2, laid flat as in cable protection complete all as specified and directed.
Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables, laid in treanches, under the floor, along the wall or along the pole with necessary clamps, nuts, bolts and washers etc. and making good disturbed surface of wall, floor etc complete all as specified and directed .
M/S R.K ENTERPRISES
MUKTA AND COMPANY
M/s KCL Engines and Machines
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .