SPECIAL REPAIRS TO BLDG NO P 250 P 251 P 259 T 192 AT FAD AND BLDG NO SP 4 AT ABOD IN AOR OF AGE B and R I UNDER GE NARANGI.

Amount

SCHEDULE 'A' PART-I

Demolition of brick/stone masonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness in floor/pavings, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridges etc complete all as specified and as directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and as directed.

Dismantling of wall lining and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and as directed.

Dismantling of boarding of any description fixed in any position with nails complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and as directed.

Demolition of cement concrete ( un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling PVC(SWR) drain pipes any size and in any position including all fitting complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n,exc 1.50 Sqm each including builders hardware complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n exc 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down cement plaster/cement lime plaster on brick walls etc, including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

Taking up or down 20 mm bore dia galvanised steel water tubes and connections including cleaning for re-fixing complete all as specified and as directed.

Taking up or down 15mm bore dia galvanised steel water tubes and connections from wall / ceiling or laid floors including cleaning for refixing all as specified and as directed.

M & L for PCC 1:5:10, type E-2, using 40mm graded stone aggregates as in mass concrete filling complete all as specified and as directed.

M & L for PCC 1:3:6, type C2, using 40mm graded stone aggegates as in surface channel and drain complete all as specified and as directed.

M & L for PCC 1:3:6, type CO, using 12.5 mm graded stone aggregates as in back filling in pressed steel door and window frame complete all as specified and as directed.

M & L for precast reinforced cement concrete cover slab in PCC 1:2:4 type B-1 using 20mm graded stone aggregates with fair finished faces including chamfers, whethering and setting in CM 1:6 including form work complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

All as per item No: 22 here in before but except bricks. Note: Old serviceable bricks as obtained from demolition under item No 1 here-in-before shall be reused under this item complete all as specified and as directed.

M&L for cutting chases for concealed pipe, making good to facings where required and pointing in cement mortar 1:3 in brick wall for cutting n exc 10 cm girth complete all as specified and as directed.

M & L for 2nd class hard wood timber scantling, clean sawn, fixed for unframed work complete all as specified and as directed.

S & F 2nd class hard wood plain fillets bullnosed splayed, chamfered or rounded on one edge or face exceeding 6sq. cm and not exceeding 13 Sq. cm in section, secured with nails complete all as specified and as directed.

S & F second class hard wood, plain, solid, straight, chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned complete all as specified and as directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 35 mm thick glazed and skeleton shutter, open rebated and prepared to receive with sash bars, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, complete all as specified.

S & F 30 mm thick glazed and skeleton door shutters, open rebated and prepared to receive with sash bars, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, complete all as specified and as directed.

S & F solid PVC door frame of size 50 x 47mm, made out of 5mm plain coloured PVC sheet reinforced with MS square tube, in opening complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and as directed.

S&F 200mm length aluminum, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 125mm size of aluminium handles, cast type, anodised complete all as specified and as directed.

S&F mild steel butt hinges, 100mm size, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and all as directed.

S&F 140mm size floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S&F aluminium body door closer hydraulically regulated designated Nos universal type suitable for door & shutter of 851 to 1000mm in width and of weight between 61 to 80kgs and fixed complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L for mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in to spikes, framed guard bars, barred iron doors, ladders and similar works complete all as specified and as directed.

M&L for mild steel TMT bars, 10mm dia and over, cut to length,bent to shape required including cutting,cranking,hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia.complete all as specified and as directed.

S & F rolled mild steel Fe 410-W ( Gde-E-250) quality as in roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing (Beam,tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F pressed steel frames for doors of size 125mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S & F powder coated aluminium push pull type glazed door shutter single leaf including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, locking arrangement, 5 mm thick float glass tinted quality on both panels complete all as specified and as directed. (Refer Jindal Cat Main-2016) Aluminium sections : (i) Shutter top, bottom middle rails :- 85.00 mm x 44.45 mm x 1.40 mm thick (19600) (ii) Shutter vertical rail : 47.62 mm x 44.45 mm x 1.35 mm thick (iii) Frame top and sides :- 63.50 mm x 38.10 mmx 1.31 mm thick (20027)

S & F two track aluminium powder coated sliding window with approved make of following extruded section of anodised glazed shutter as per Standard Engineering practices including all other accessories complete like 5.00 mm thick glass panes, rubber beading, etc. complete all as specified and as directed. (Refer Jindal Cat M-2014) aluminium sections : 'A'series (i) Shutter bottom & top :- 43 x 14.7 x 1.2 mm thick (20688) (ii) Shutter interlock :- 37.50 x 20.5 x 1.5mm thick (20655) (iii) Shutter side (Handle) :- 43 x 14.7 x 1.2 mm thick (20688) (iv) Frame bottom :- 50.3 x 26 1.2 mm thick (20669) (v) Frame top and sides :- 50.3 x 26 x 1 mm thick (20670)

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by GE, having tensile strength of 550Mpa as in ridge/flashing board and similar work of width or girth not less than 610mm fixed with self tapping screws complete all as specified and as directed.

M&L for 50mm average thick PCC 1:2:4, type B1, using 20 mm graded stone aggregates as in padding of roof top finishing even and smooth without using extra cement mixed with water proofing compound @ 3% weight of cement or as per manufacturers instructions complete all as specified and as directed. Note : Integral water proofing compound shall be measured separately)

M & L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:- (i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish n exceeding 100 mtr distance from starting point. (ii) Screed bed or bedding layer of cement mortar 10 mm thick in CM 1:4 with mixing of water proofing compound @3% weight of cement or as per manufacturers instructions and surface finished fair and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm. (iii) Cleaning of plastered roof surface and applying one coat of bituminous primer @ 0.25 ltr /Sqm conforming to IS:3384-1986. (iv) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above over by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (v) applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm.

M & L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board ) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm gride complete all as specified and as directed.

M & L for 19mm thick one side prelaminated particle board and other side balancing white lamination interior grade and fixed with screws to timber frame work in cup board shutters complete all as specified and as directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification all as specified and as directed.

M& L for 75mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregates as in sub base in floor complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

M & L for 100mm thick PCC 1:2:4, type B2, using 40mm graded stone aggregates as in path/paving/hard standing and finishing the surfaces even and smooth without using exra cement complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded stone aggregates as in floors finished fair and smooth without using extra cement complete all as specified and as directed. Note : This item shall not be used as sub base to floor tiles.

M&L for non skid coloured ceramic tiles 7 to 8mm thick, (square/rectangular) area of each tiles exc 0.06 sqm but not exc 0.11 sqm as in floors, set and jointed in cement slurry and pointed in white cement mixed with colour pigment to match colour of tile surfaces over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M & L for glazed ceramic coloured tiles 450X300X7mm/300 x 200 x 7mm thick, laid in pattern as directed by Engr-in-Charge, as in skirting, dado, riser to steps, etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile, over and including including 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM (1:4) complete all as specified and as directed.

M & L for coloured non-skid ceramic tiles, 9 to 10mm thick (Square/rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 15 mm thick screed bed or bedding layers in cement mortar (1:6) complete all as specified and as directed.

M & L for ceramic tiles, light shade, 9 to 10mm thick (square/rectangular), area of each tile not exceeding 0.36 sqm, in skriting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles, over and including 10 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:4 complete all as specified and as directed.

M & L for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M & L in repairs, for pre-polished chequered cement concrete tiles 30cm x 30cm x 25mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20mm thick in CM (1:4) etc complete all as specified and as directed.

M&L for applying two coats of epoxy resin/ polymer modified cementitious coating like brush bond of FOSROC or equivalent applied to wall, beams and floors of sunken portion complete all as specified and as directed.

M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 3% by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound to be measured and paid separately as "Supply only".

Supply only approved integral water proofing compound.

M & L for rendering 5mm thick in cement mortar 1:4, on fair faces of concrete surfces as in ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of cresote oil with complete all as specified and as directed.

M & L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over 1mm thick(average) wall care putty all as specified and as directed.

M & L for preparation of old plastered surface of walls and applying one coats of oil bound distemper complete all as specified and as directed

M & L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of primer over 1mm thick(average) wall care putty all as specified and as directed.

M & L for preparation of newly plastered surface of walls and applying two coat of cement base paint over one coat primer complete all as specified and as directed.

M & L for complete removal of existing treatment of wall and applying two coats of exterior emulsion paint over a coat of primer over 1mm thick(average) wall care putty complete all as specified and as directed.

M& L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer over 1mm thick(average) wall care putty complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n,exc 0.50 Sqm in each pane complete all as specified and as directed.

S & F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc 0.5 sq.m in each pane complete all as specified and as directed.

M & L for preparation of newly prepared wooden surfaces of any description, not otherwise described over 10cm width or girthand applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M & L for preparation of old wood or wood base materials of any description over 10 cm width or girth, not otherwise specially described and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for preparation of new untreated surfaces of wood and wood based surfaces of any description, not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome complete all as specified and as directed.

M & L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

S & F 15 mm bore dia medium grade glavanised steel water tubes with all fittings and fixed complete to walls etc. complete all as specified and as directed.

Fixing only old serviceable glavanised steel water tubes 15mm bore, with and including new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S & F 20 mm bore medium grade glavanised steel water tubes with all fittings and fixed complete to walls etc.complete all as specified and as directed.

S & F in repairs, bib taps, 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs, 15 mm bore dia angle valves/stop valves, chromium plated, cast copper alloy, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs, 15mm bore dia of concealed stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repair, 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed.

S & F in repairs, 20mm bore dia gun metal globe or gate valve, cast copper alloy, screwed down, high pressure with cruth or butterfly handle, screwed both ends for iron pipe or for union all as specified and as directed.

S & F in repairs, 500 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S & F in repairs, 1000 litres capacity rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I with and including 20mm bore dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed.

S & F in repairs, Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap and provision of concrete bedding and making good to floor complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S & F in repairs, vitreous china wash hand basin, white flat back size 550 mm x 400 mm including brackets including pillar tap, 15 mm bore chromium plated, cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts and PVC waste pipe,PVC connection pipe 15mm size with PTMT nuts of length 600mm complete all as specified and as directed

S & F 40 mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and as directed.

S & F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F in repairs, tubular towel rail, brass chromium plated, 20mm dia, D type 60 cm long between flanges complete all as specified and as directed.

S & F in repairs, chromium plated soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F in repairs, shelf of PTMT fixed with and including chromium plated brass srcews and wooden plastic cleats (Minimum weight 300gm) complete all as specified and as directed.

S & F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to wall complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F in repairs, PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

S & F in repairs, 75 mm dia PVC(SWR) junction single (single T) equal provided with access door complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap plain with grating including jointing with solvent cement of 75mm dia complete all as specified and as directed.

S&F in repairs, stainless steel grating doom 110 mm dia (with waste hole or without waste hole) complete all as specified and as directed.

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.

M & L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (including connecting to earth dolly) laid/fixed in and including concealed in PVC rigid conduit on walls/ceiling, and also including sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for One light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed.

All as per item serial No 119 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item serial No 119 here-in-before but One socket outlet 3 pin 5 Amp on independent board.

All as per item serial No 119 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable and earth continuity wire with 2.5 Sqmm cable for 6 pin 15 Amp socket outlet on independent board.

M & L for point wiring with PVC insulated and unsheathed cable, single core, multistranded copper conductor, 1.5 sqmm size, 1100 volts, FRLS grade cable confoRming to IS-694, 1990 drawn in and including PVC Casing and Caping, with all accessories including fabricated pressed steel terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for light/fan/exhaust fan point controlled by one 5 Amps switch one way complete all as specified and directed.

All as per item serial No 123 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches

All as per item serial No 123 here-in-before but One socket outlet 3 pin 5 Amp on independent board.

S & F switch piano, flush type, single pole, one way, 5 Amps 230 volt complete all as specified and as directed.

S & F socket outlet 3 pin, 2-in-1, 5 Amps, flush type complete all as specified and as directed.

S & F switch socket combination outlet, 5 pin, 2-in-1, 5 Amp, flush type complete all as specified and as directed.

S & F switch socket combination, multipurpose, 2 in 1, 6 pin, 5 & 15 Amp, flush type complete all as specified and as directed.

S & F ceiling rose, surface bakelite, 65x50mm, three teRminal complete all as specified and as directed.

S & F lamp holder, insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed.

S & F stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed.

S&F in repairs LED box type fitting pre-wired including LED tube 1x20W connecting up with aluminium housing and sheathed 1100 volt grade flexible copper cable & fix on PVC block complete all as directed.Make:- Jaguar Model-LGLZ01X020XC/ LGLZ01X020XN/LGLZ01X020XW or Make:- Havells Model-LUMILINEPLUSBS20WLED865SPCSS or equivalent model of make Philips /GE/Crompton/Century Led Ltd/Halonix

S&F in repairs LED light fitting 10 watt 230 volt including 10 watt LED tube, extruded aluminium for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed. Make:- Jaguar Model-LGLZ01X010XC/ LGLZ01X010XN/LGLZ01X010XW or or Make:- Havells Model-LUMILINEPLUSBS10WLED865SPCSS or equivalent model of make Philips /Bajaj/ Crompton/Century Led Ltd/Halonix.

S & F in repairs, environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head black-lit LED10 W -IP-66 luminaire comprising of high brightness LEDs complete all as specified and directed. Make:- Havells Model HEXAFT10WLED857SSYMBOPC or equivalent Model of make : Philips / Crompton/Century Led Ltd/Halonix.

S&F in repairs,MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. Make- Legrand cat No-5077 45. or equivalent. model in Siemens / Schnider

S & F in repairs, single pole & neutral DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs confoRming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 11 or equivalent model in Siemens / Schneider

S & F in repairs, single pole & neutral DBs 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs confoRming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed. Make :- Legrand Cat No 5076 10 or equivalent model in Siemens / Schneider/GE/C&S Electricals

S&F MCCB four pole 63A, Icu16KA, theRmal magnetic, 415v AC complete all as specified and as directed. Make:- Legrand Cat No 4200 13 or equivalent model of make Hager/Siemens/ABB/Schneider/GE/C&S Electricals

S & F MCB TPN 40 Amps, 415V,50 HZ,C series breaking capacity 10KA all as specified and directed.Make-Legrand ,cat part no-4086 81 or quivalent model of make Hager/Siemens/ABB/ Schneider/GE/C&S Electricals

S&F MCBs, SPN 6 to 32 Amps, 10 KA , IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Cat No 4086 09 4086 17 or quivalent model of make Hager/Siemens/ABB/ Schneider/GE/C&S Electricals

S & F MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Make :- Legrand Model 4085 87 to 95 or quivalent model of make Hager/Siemens/ABB/ Schneider/GE/C&S Electricals

M & L for Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable confoRming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit confoRming to IS-9537 with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. Note : Three runs of cable and one run of PVC conduit will be measured as one Rm unit.

Taking down ceiling fan including connection wires carefully ,removal to store for safe custody and refixing the same in original position after completion of rewiring work complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below noRmal ground level with top edge of earth plate at a depth not less than 1.5 metre below noRmal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

M.P.SUPPLY

VENUS TRADING CORPORATION

M/S RAJ RANI BUILDERS

M/S MANOJ PAUL