Supply of Furniture Required at District Panchayats Training and Resource Center at Uluberia, Howrah

Amount

Providing and supplying and placing COT made of M.S. PIPE 25.4x 50.8 x 1.2 THK.;M.S. PIPE 19.05x 19.05 x 0.8 THK.; M.S. ANGLE 20x20x1.6 THK; M.S. PIPE DIA. 50.8 x 0.9 THK.;M.S. PIPE DIA. 15.875 x 0.8 THK.; Bed Metal frame with CO2 welding. Should have a finish of Epoxy Polyester powder coating of DFT=50/60 microns. Dimension of the bed would be of 2060 mm x 1001mm x 403mm x 956mm and internal dimensions of 922mm x 1980mm.

DINNING TABLE with understructure made of chromed steel tube of dia40x720 mm (L). The top is of tempered glass of dimension 1520x920x12 mm. The chair is of dimension 440mm (W) x 550mm (D) x 985mm (H). The back rest is made of solid wood of 22 mm. The back leg has lamination of 38x28mm. The front leg is of Solid Wood of 1.5x1.538x38 mm. The front, back and side panels are made of 22 mm solid wood

STUDY TABLE of dimension 1130X540X93mm made of 15mm MDF for table top/drawer front, 14mm MDF for inner drawer left&right side,3mm for drawer bottom, 15mm PB for other panels. 0.18mm pvc was vacuum laminating for surface of table top and drawer front, 0.4mm lipping for other panels.

CHAIR with the seat-back shell made up of 1.2 cm thick hot pressed plywood laminated with natural veneer in three different shades of Teak, Mahogany and Rubber wood with dimensions of BACK SIZE: 42.0cm. (W) X 45.0cm. (H) and SEAT SIZE: 44.0cm. (W) X 40.0cm. (D). The understructure is made of M.S. tube dia.1.9cm. (3/4”) x 16BG thk. and black powder coated.

DUAL DOOR WARDROBE of dimension 1500mm (H) x 1500mm (W) x 500mm (D) made of Made from combination of CRCA 0.5 mm & 0.8 mm Thickness. Legs fitted with screw type leveler (add 40mm to the height). Each Full shelf has Load Capacity of 40 Kg UDL Max. Epoxy Powder coated to the thickness of 50 microns (+/-10). Doors made from combination of CRCA 0.5 mm &0.8 mm Thickness. § Steel hinged door with self closing hinges.Handle Aesthetically appealing, Ergonomic, Made of Aluminum. 3way locking.Epoxy Powder coated to the thickness of 50 microns (+/-10).

MODULAR TABLE–to meet the requirement of Conference room. Material:Substrate: MDF; Skin: PVC Membrane foil (0.4mm thk) clad on the substrate MDF using PU glue for better adhesion. This foil is pre-coated with layer of polyurethane for better scratch resistance. Work surface: Top thickness 37.6 (18mm + 18mm + 0.6 mm DL + 0.4mm Membrane) Edge profile Waterfall Edge 10mm radius on top edge and 5mm at bottom. Legs: Made from 36mm PPB (18+18) having a straight profile with half round edges and clad with 0.6mm thick Post Forming laminate. Overall thickness of leg is 37.2mm. Modesty Panel: Made from PLT (Prelaminated Twin) boards of 18mm thick.Wire Carrier: Made from 0.6mm thick CRCA painted. Carrier Cover: Made of 12mm thk. MDF Painted all over. (1 to 20 seater)

Mid Back revolving chair with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The pneumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

Desklet Chair with the seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. BACK SIZE: 49.0cm. (W) X 47.0cm. (H) SEAT SIZE: 49.0cm. (W) X 44.0cm. (D). The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. The tubular frame is cantilever type & made of Dia.2.54cm. (1”) x 14 BG M.S. E.R.W. tube and black powder coated. The Armrest Tube of Dia.2.54cm. (1”) x 14 BG M.S. E.R.W. tube is welded to mainframe. The desklet is fitted on the right hand side. The wooden desklet is made of 1.8cm. thk. pre-aminated chipboard with 2mm. thk. P.V.C lipping all around. SIZE: 54.0cm. (W) X 29.0cm. (D). The armrests are made from chemically treated & seasoned wood with black melamine polish. The paper tray is made of 0.2cm. dia. M.S. wire spot welded to form a mesh. It is black powder coated. SIZE: 34.5cm. (W) X 35.0cm. (D).

PRINCIPAL TABLE MAIN TOP : 1800X795MM ; Particle-board ( Melamine Finish). 25mm Top + 15mm frame; 2mm PVC Lipping on top and 0.35mm PVC Lipping on frame. MODESTY PANEL : 1100X405X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping. DRAWER FRONT : 500X170X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping. KBPT : 578 (W) X 284 (D) X 16mm THK Particle-board ( Melamine Finish) ; with 0.35mm THK PVC Lipping. ERU : 1600 (L) X500 (W) x 650 (H) all panels are 16mm THK Particle-board ( Melamine Finish) with 0.35mm THK PVC Lipping.

PRINCIPAL ROOM EXECUTIVE REVOLVING CHAIR with head rest. The cushioned seat assembly consists of seat outer (30% glass fiber Nylon) and upholstered seat inner (poly-propelene) with molded polyutherene foam and polyster fabric. The net back is made of Back Outer (material Glass Fiber filled Nylon) and back inner (Material -PP) and upholstered using Polyester Mesh Fabric with High Tenacity yarn. BACK SIZE: 46.5 cm x 60.0 cm. SEAT SIZE: 51.0 cm x 49.0 cm.The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. The support spine is made up of High Pressure Die Cast polished Aluminium.The Armrest should have two adjustments Hieght (6 cm +/- 0.5 cm) and Depth (6 cm +/-0.5 cm). Height adjustment is provided in Aluminium structure of Armrest which is connected to the Aluminium back spine and to be operated by button. The depth adjustment is to be provided in Pad which is to be fixed to armrest structure. Armrest top to be made up of PU molded over plastic inner. Active Bio Synchro Mechanism with 360° revolving type, Front pivot for tilt with feet resting on ground & continous lumber support. Tilt tension should be adjustments can be done from sitting position. 5 position tilting;

Principal Room Visitor chair with seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Back Size of dimension 47.5 cm. (W) x 58.0cm. (H) and Seat size of dimension 47.0 cm. (W) x 48.0 cm. (D). The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube.

Vice Principal Desk Table with dimensions of 1500 (W) x 750 (D) x 740 (H); side unit of dimension of 1050 (W) x 520 (D) x 705 (H). The top is made of 25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6 MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING. The modesty panel is made of 18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING. The pedeatal of dimension 646H x 390W x 440D, made of Metal Front 3DR BOX + BOX + BOX having dimensions 646mmx390x585. Made of Welded Assembled 0.8 thk CRCA for Body Shell, Drawer Front & tray, Front Side Stiffener, Rear Side Stiffener, 1.2 thk CRCA Top Stiffener & Bottom stiffener, 0.5 thk CRCA for Drawer side, bottom side and Drawer Back. All CRCA are of 'D' Grade sheet as per IS-513. All Drawers with doulble extension precission ball slide. 10 lever Cam Lock & Central RH locking with actuator & locking channel mechanism. Epoxy polyester powder coated to the thickness of 50 microns (+/- 10)

Vice Principal HIGH BACK REVOLVING CHAIr with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 69.5 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The pneumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

Vice Principal VISITOR CHAIR with seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Back Size of dimension 47.5 cm. (W) x 58.0cm. (H) and Seat size of dimension 47.0 cm. (W) x 48.0 cm. (D). The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube.

Faculty TABLE of dimension 1350 x 750 x 728, The top is made of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding. The under structure consists of Modesty Panel made of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding, Rectangular frame of Fabricated component in 1.2mm thick CRCA (IS: 513), Finish: Powder coat (Epoxy polyester), Leg made of Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS: 7138), Finish: Powder coat (Epoxy polyester). The Pedestal is made up of shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester), drawer tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester), drawer front made of 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).

Office Chair MID BACK REVOLVING CHAIR with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The pneumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

Office TABLE of dimension 1200 x 600 x 728, The top is made of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding. The under structure consists of Modesty Panel made of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding, Rectangular frame of Fabricated component in 1.2mm thick CRCA (IS: 513), Finish: Powder coat (Epoxy polyester), Leg made of Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS: 7138), Finish: Powder coat (Epoxy polyester). The Pedestal is made up of shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester), drawer tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester), drawer front made of 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester).

Faculty Room Mid Back revolving chair with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The neumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

Reception Table Tops: Made from 18mm thick PLB with PVC lipping. Side Panels: Made form 18mm thick PLT with PVC lipping. Modesty Panel: Made form 18mm thick PLT with PVC lipping. Shelf Storage units and Open shelf ERU: Made form 18mm thick PLT with PVC lipping. Doors of Storage Units: HDU with 2doors and adjustable shelf. Made from 18mm thick PLT with PVC lipping. Mobile Pedestal: One Box and one Filing drawer with 18mm thick PLB fronts and top. Handles:Black Powder coated Die cast Aluminum alloy handles. Mobile Pedestal and HDU are fitted with central Lock. Dimensions: MD: 1350 x 750 x 750; ERU: 1200 x 450 x 750; PED: 390 x 435 x 529

Reception Chair MID BACK REVOLVING CHAIR with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness= 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The neumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY: The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia. (1+4 seater crome steel chair)

Librarian Table fo dimension 1200x600x728, The top is made of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding. The under structure consists of Modesty Panel made of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding, Rectangular frame of Fabricated component in 1.2mm thick CRCA (IS: 513), Finish: Powder coat (Epoxy polyester), Leg made of Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS: 7138), Finish: Powder coat (Epoxy polyester). The Pedestal is made up of shell 0.6mm thick CRCA (IS:513) , Finish: Powder coat (Epoxy polyester), drawer tray 0.6mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester), drawer front made of 0.8mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester)

Librarian Chair MID BACK REVOLVING CHAIR with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness= 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The neumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

Library Reading Table MULTIPORPOSE TABLE made of Work top 25 mm Thick PLB Tops with 2mm Thick PVC Edge Beading and 1.6 mm thick M.S Cframe Supporting the Top. Legs - Dia. 38.1 x 1.6 mm thick M.S ERW tube. (4 seater)

MID BACK VISITOR Chair with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness=20+/-2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The pneumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

Library STORAGE of dimension: 915 mm (W) x 486mm (D) x 1981* mm (H). Welded construction made of 0.8 mm thk CRCA for Shelf & 0.9 mm thk CRCA for all other components. Doors of glasses fitted to full height steel frame with 2 way locking mechanism with shooting bolt and Chrome plated brass handle. Height wise adjustable Shelves having uniformly distributed load capacity per full shelf of 80 Kg maximum. M10 Screw type leveler with hex plastic base (10mm to unit height and additional 10mm for adjustment). Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).

Computer TABLE with dimension of 1200W x 600D x 750H made of 18mm Prelam Particle Board, 3mm Prelam MDF Board having metal parts of BM Slide for Keyboard, Castor Mounting Plate, Locking Bracket, Angle Clit.

Computer Chair MID BACK REVOLVING CHAIR with the seat and back made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm (W) x 58.0 cm (H) and SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D). Having Polyurethane foam - moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene. CENTER TILT SYNCHRO MECHANISM. The pneumatic height adjustment has an adjustment stroke of 12.0 cm with TELESCOPIC BELLOW ASSEMBLY:The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. PEDESTAL ASSEMBLY. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia.

SARAMA STEEL FURNITURE

Bombaysafe And Appliances Pvt. Ltd.

WEST BENGAL HANDICRAFTS DEVELOPMENT CORPORATION LIMITED

Godrej And Boyce Mfg.Co.Ltd.