REPAIR REPLACEMENT OF UNSERVICEABLE SUBMAIN WIRING POINT WIRING SWITCHES SOCKETS AND EARTHINGS FOR BUILDING UNSERVICEABLE DISTRIBUTION BOARDS LT FEEDER BOXMCBSBUILDING SECURITY LIGHTS INDUSTRIAL SOCKETS MCCB ISOLATORS GARDEN LIGHTS INCLUDING ALLI

Amount

Taking down carefully U/S aluminium/ copper point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc , removing all material for reuse/ issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed.

Taking down unserviceable DBs including MCCBs/MCBs complete issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed.

Taking down old sub main wiring of any type and size complete all as specified and directed .

M &L for Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in rigid PVC type conduit concealed in walls / floors/ ceiling etc with and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

One light/ fan/exhaust fan point controlled by one way switch.

One light point controlled by 02 two way switches .

One three pin socket outlet 6 amps socket on the same board with other switches .

One 3 pin socket point 5 Amps on the independent board.

One bell point controlled by one bell push .

All as per item No 4 here-in-before but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 1.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps soket outlet independently all as specified and as directed by engr-in-charge.

Supply & fix switch modular type single pole 1 way 6 Amp 230 volt complete as directed.

Supply & fix switch modular type single pole 2 way 6 Amp 230 volt complete as directed.

Supply & fix socket 6 Amps modular type, 230 volts grade all as directed.

Supply & fix switch modular type 1 way 16A, 1 module all as specified and directed.

Supply & fix Socket Modular type 6A/16A 2-3pin combined 2 module 230Volts grade all as directed.

Supply & fix Modular switch bell push 6 Amps one module all as specified and directed by Engr-in-Charge.

Supply & fix modular type fan regulator 120 W two module complete all as specified and directed by Engr-in-Charge .

Supply and fix bell music AC 230V single phase all as specififed and directed by Engr-in-Charge.

Supply & fix ceiling rose surface bakelite two to three terminal complete all as directed.

Supply & Fix angle holder polycarbonat/bakelite type with back plate complete all as specified and directed including taking down old one.

Supply and replacement of LED type 4 feet tube light batten fitting surface mounted of 20 Watts extruded aluminium housing high lumen output complete all as specified and directed .Make Crompton Cat No-CCS-102-10-65-SL-DP-NWH Or eqvt to Bajaj/Havells

Supply and replacement of LED type 4 feet tube light batten fitting surface mounted of 20 Watts made of aluminium extrusion with high efficient LEDs & opal diffuser with both end input AC connections, IP20.lumen output complete with fixing arrangement all as specified and directed .Make : HALONIX Cat No-HLTLD-04-20-CW or Eqvt

Supply and replacement LED mirror light fitting surface mounted of capacity of 10W with plastic body and accessories complete all as specified. including connecting to ceiling rose with twin copper conductor of size 0/0.24 complete all as specified and directed .Make HALONIX Cat No-HLTLD-04-10-CW or Eqvt

Supply and replacement of LED type surface mounted decorative bulk head fitting edge lit of 10Watts complete including connecting to ceiling rose with twin copper conductor of size 0/0.24 all as specified and directed. Make HALONIX Cat No-HLBH-21-10-CW or Eqvt

Dismantling the ceiling fan / Exhaust Fan complete of any type and size from the various buildings / locations and cleaning, servicing, greasing to bearings checking of nuts bolts , safety split pin, bushes , capacitor and complete testing after two coat painting the ceiling fan ,blades ,down rod etc /Exhaust fan and refixing the site / bldg with complete connection all as directed and specified by Engr in charge. Note :- Expendable stores like cotton waste/cleaning materials, grease, lubricants, machine screws, safety split pin, bots/nuts and transportation to and from site to work place are deemed to be included in rate quoted

Ceiling Fan Any make/rating

Exhaust fan of any size/rating

Dismantling all components of ceiling fan 1200mm sweep, cutting and removing burnt out copper winding from the rotor assy and rewinding with super enamelled copper winding wire of suitable gauge and turns with necessary insulation materials , varnishing, reassembling , greasing to bearing , replacing bushes, replacment of capacitor and complete testing after painting the ceiling fan ,blades ,down rod etc and refixing the site / bldg with complete connection all as directed. Note:- (a) The spares like ball bearing, capacitor and GM bush required for repair the ceiling fan will be measured and paid separately under respective item. (b) Expendable stores like cotton waste /cleaning materials, grease, lubricants, machine screws, safety split pin, bolts, nuts and transportation to and fro from site to work place are deemed to be included in rate quoted.

All as per item No.28 herein before but for 1400mm sweep ceiling fan

All as per item No.28 herein before but for 300mm sweep exhaust fan

All as per item No.28 herein before but for 450mm sweep exhaust fan

Supply and replace worn out fan bearings of the existing size of superior quality complete all as specified and directed

Supply and replace capacitor 2.5mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed

Supply and replace capacitor 4.0mfd suitable for exhaust fan complete all as specified and directed

Supply and replace rubbr reel of superior quality along with gun metal frame and split pin complete all as specified

Supply and fix exhaust fan louvers on outside of the external wall suitable for 300/ 380mm sweep for G+5 buildings complete all as specified and as directed .

Supply and fix exhaust fan louvers on outside of the external wall suitable for 450mm sweep for G+5 buildings complete all as specified and as directed.

M & L for submain wiring of 2 run 4 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC conduit /existing conduit /surface with accessories concealed in wall/roof including one run of 2.5 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge. Note : 2 runs of 4.0 sqmm PVC insulated unsheathed copper conductor and 1 run of 2.5 sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

M & L for submain wiring of 2 run 6 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC conduit /existing conduit /surfaceaccessories concealed in wall/roof including one run of 4.0 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge. Note : 2 runs of 6.0 sqmm PVC insulated unsheathed copper conductor and 1 run of 4.0 sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

M & L for submain wiring of 4 run 10 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC conduit /existing conduit /surfaceaccessories concealed in wall/roof including two run of 6.0 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge. Note : 4 runs of 10.0 sqmm PVC insulated unsheathed copper conductor and 1 run of 6.0 sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

Supply and fix in replacement of MCB DB SPN 4 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed

Supply and fix in replacement of MCB DB SPN 8 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed .

Supply and fix in replacement of MCB DB SPN 12 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed .

Supply and fix in replacement of MCB DB SPN 16 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed .

Supply and fix in replacement of MCB SPN 6-32 Amps C Curve type 230 Volts single phase all as specified complete including dismantling the old one.

All as per above item No 45 but capacity of MCB SPN (40-63) Amps

Supply and fix in replacement of MCB SP (6-32) Amps C Curve 230 Volts single phase all as specified complete including dismantling the old one.

Supply and fix in replacement of MCB TP (25- 63) Amps C Curve type 415 Volts three phase all as specified complete including dismantling the old one .

Supply and fix in replacement of MCB TPN (16-32) Amps C Curve 415 Volts three phase all as specified complete including dismantling the old one .

Supply and fix in replacement of MCB TPN (40-100) Amps C Curve 415 Volts three phase all as specified complete including dismantling the old one .

Suply and fixing in replacement of Hylum sheet with not less than 3mm thick of size 4" x 4"

Suply and fixing in replacement of Hylum sheet with not less than 3mm thick of size 4" x 6"

Suply and fixing in replacement of Boxes junctions, plastic, round, four terminals fixing in wall /ceiling as required at site /directed by Engr in charge.

Suply and fixing in replacement of switch piano flush type 6 amps one way type including taking down old one.

Suply and fixing in replacement of switch piano flush type 16 amps two way type including taking down old one .

Suply and fixing in replacement of socket 5 pin flush type 6 amps including taking down old one.

Suply and fixing in replacementof fan regulator flush type switch type 100/120 watt including taking down old one.

Suply and fixing in replacement of fan regulator flush type socket type 100/120 watt including taking down old one.

Suply and fixing in replacement of Switch socket combination 2 in 1, 6A flush type including taking down old one.

Suply and fixing in replacement of Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal type including taking down old one.

M & L for repair to existing broken switch board by taking out the old exisiting switches, sockets, regulators flush type and refixing the same after replacement of hylum sheet of required size under mentioned with complete electric connections and making screws and made functional with all electric connections as per speciifed and directed by Engr-in- charge. Note: Switches , sockets, regulators, hylum sheet, if required at site then it will be measured and paid separately.

Supply and fix in replacement of single phase Tamper proof electronic energy meter with LCD display 240Volts 2 wire system , 10-60Amps 50 Hz having accuracy class 1.00 as per IS-13779 complete with all standard anto tamper features including logging and display of tamper data complete including sealing properly with lead seals and wires and taking out the old unserviceable meter on complaint basis and deposit the same to AGE E/M Store Yard complete all as specified and directed by Engineer-in-Charge Make : L&T/Secure/AMTL

Supply and fix in replacement of Three phase Tamper proof electronic energy meter with LCD display 415 Volts 3 wire system , 10-60Amps 50 Hz having accuracy class 1.00 as per IS-13779 complete with all standard anto tamper features including logging and display of tamper data complete including sealing properly with lead seals and wires and taking out the old unserviceable meter on complaint basis and deposit the same to AGE E/M Store Yard complete all as specified and directed by Engineer-in-Charge Make : L&T/Secure/AMTL

Supply only insulation tape roll (as per sample)

M & L for Earthing complete with galvanised iron earth plate electrode 600x600x6 MM as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead wire 4.0 mm,dia by means of bolts & nuts,to GI and connected to earthing test point all as shown in elecrical plate No-3 of SSR part -1 of 2009 specified or indicated and testing on completion including excavation /earth work in any type of starta PCC (1:3:6) type C1 earthing chamder pre cast slab 50 mm thick in cement concrete (1 : 2 : 4 ) type B1 , Reinforced with welded steel wire fabric (XPM) weight not less than 4 KG /sqm cast iron frame ,funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including 4.0MM as earthing lead.7.5 meter long etc complete all as specified. complete all as specified and directed by Engr-in-Charge. Note : GI Wire upto 7.5 mtr length shall be deemed to include in this items rate.

M & L for Earthing complete with galvanised iron earth plate electrode 600x600x6 MM as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI Strip 32x 6 mm,dia by means of bolts & nuts,to GI and connected to earthing test point all as shown in elecrical plate No-3 of SSR part -1 of 2009 specified or indicated and testing on completion including excavation /earth work in any type of starta PCC (1:3:6) type C1 earthing chamder pre cast slab 50 mm thick in cement concrete (1 : 2 : 4 ) type B1 , Reinforced with welded steel wire fabric (XPM) weight not less than 4 KG /sqm cast iron frame ,funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including 4.0MM as earthing lead.7.5 meter long etc complete all as specified. complete all as specified and directed by Engr-in-Charge. Note : GI Wire upto 7.5 mtr length shall be deemed to include in this items rate.

S & Fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia GI wire all as specified.

S & Fixing of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32X6 mm dia GI Strip all as specified.

S & F in replacment of LED driver suitable for LED street light fitting of capacity upto 70 Watts of existing make complete including taking down the old u/s fitting from pole / bldgs.Note : All T & P will provided by the contractor and No any extra cost will provided by the Dept.

S & F in replacement of LED driver suitable for LED street light of capacity upto 70 to 150Watts of existing make complete including taking down the old u/s fitting from pole / bldgs.Note : All T & P will provided by the contractor and No any extra cost will provided by the Dept .

S & F in repairs ball cock complete with epoxy coated aluminium rod and HDPE ball size 20 mm dia complete. Make : Prayag

S & F in repairs ball cock complete with epoxy coated aluminium rod and HDPE ball size 25 mm dia complete. Make : Prayag

M & L for servicing of 4 pole structure including greasing of 03 Nos GOD, replacemet of all jumpers with proper lugs/thimble, painting the structure and channels , replacement of wornout nuts bolts, replacement of blown fuses , trimming of tree branches including painting to the structure with aluminium paint over a coat of red oxide primer complete all as specified and as directed. Note: 1. Proper shut down should be taken in advance. 2. All Safety precautions should be taken by the tenderer

Materia & labour for cleaning of TPN DB box in each building by blower and checking the all incommer/outgoing MCBs/TPNs etc and tight the all ecectric loose connections and fixing of copper lugs through existing MCBs and after painting the complete the TPN DB Box as directed by Engr in charge

Taking down defective geyser/ storage water heater of any pattern/ capacities from existing position/place comprising of the following tasks:- (a) Inspectin ,taking down (dismantling) , descalling , brushing, cleaning of storage tank & painting internally with one coat of proprietary bitumnous composition not liable to impart taste or odour or otherwise contaminated water (b) Examine water tightness of storage tank after cleaning (c) Carryout operation of all stopcock, pressure reducing valves etc to ensure free movement of the working parts (d) Replace washers and glands of all taps & ball valves to ensure water tigtness. (e) Inspect overflow/vent pipes & remove blockagesobstructions if any (f) Check and correct earth continuity of electrical parts (g) Check, maintain and rent thermostats & tests its functioning (h) Checking and adjustment of pressure reducing valve (j) Checking of dead weight type high pressure release valve (HPRV) by removing dead weight position cleaning the seat & ensuring that the vent hole is not blocked /chocked (k) Check, maintain and rent thermostats & tests its functioning (l) Checking and adjustment of pressure reducing valve (m) Checking of dead weight type high pressure release valve (HPRV) by removing dead weight position cleaning the seat & ensuring that the vent hole is not blocked /chocked (n) Check, maintain and rent thermostats & tests its functioning (o) Checking and adjustment of pressure reducing valve

(p) Checking of dead weight type high pressure release valve (HPRV) by removing dead weight position cleaning the seat & ensuring that the vent hole is not blocked /chocked (q) Visual examination of fusible plug to ensure its intactness (r) Descalling of the immersion type heating element cleaning with diluted , hydrochloric acid solution & testing before refilling (s) Replacement of the rubber/PVC gasket to ensure water tightness (t) Testing of geyser after repairs (u) Refixing of geyser after testing and replacement of defective parts including new hold fastened including necesssary PCC work complete all as specified and directed

S & F in replacement of heating element of 2.0 KW rating as required at site (round & Tringle) including rubber washers of ISI marked .

Supply in replacement of thermostat for the geyser of following capacities with ISI marked -

S & F in replacement of PVC connection pipe with two brass adaptors 450mm long & connecting up complete all as specified and as directed (as per sample).

S & F in replacement of Geyser indicator (red /green) including taking down.

M & L for painting external part of the geyser body at site/ existing position with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning complete all as specified and as directed

S & Fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one no 20 Amps MCB SP C curve type with complete connection all as directed and specified.

S & Fixing decorative LED Post top fitting 40 watt suitable for 360 degreeindirect light with IP 65 protection Resistance to impect and corrosion Glare-free and better uniformity with complete all fixing arrangement including taking down old one all as specified and directed. Make : Crompton cat No-LPTO-40-CDL or Eqvt Make in Philips/Bajaj

S & Fixing decorative LED Post top fitting 20 watt suitable for IP 65 Rated protection suitable for gardens and heritage sites with complete all fixing arrangement including taking down old one all as specified and directed. Make : Crompton cat No-LPTH-20-CDL or Eqvt Make in Philips/Bajaj

Fixing only LED street light / flood light fittings of any rating / wattage including complete connection with fixing arrangement all as directed and specified by Engr in charge including taking down. Note :(i) Street light /flood light fitting will be issued under schdule 'B' (ii) No any addl cost to be provide the contractor for T & P

Material and labour for painting of existing steel tubular street light poles above the PCC foundation/coping surface, etc with a coat of synthetic enamel paint alumium Paint including numbering of poles, cleaning of existing surface with wire brush and after white wash the copping area of two coats of white wash complete all as directed by Engineer-in -charge.

Material and Labour & Painting of LT outdoor type feeder pillar box of size not more than 1.50 x 1.25 x 0.75m with two coats of enamelled paint over a coat of red oxide primer including repair to the hinges and locking system , cleaning inside the panel, cleaning the vegetation around the foundation upto 1.0 mtr around complete all as specified and as directed

M & L for Painting of GI pipe suitable for posttop lanteen of any type / size with one coat of existing paint and cleaning the PCC area and minior repair the bottom portion by brush and after two coat of white wash complete all as specified and as directed by Engr in charge. Note : If PCC required then measured and paid separately.

M & L for PCC (1:3:6) type C1 using 20 mm graded aggregrate for making the blocks suitable for fixing of post top lantern fittings all as required at site including all connections as specified and directed .

S & Fixing decorative LED Post top fitting 10 watt suitable for IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360 light distribution.with complete all fixing arrangement including taking down old one all as specified and directed.Make : Crompton Cat No : LBLSN-10-CDL or eqvt

Taking down the High mast light fitting safely electrically /mannually from the pole at site and cleaning after minor repair and checking of all electric connections and remove the old unserviceable LED light fitting from the pole and replacement the drive (as required at site ) after replacement of drive complete checking connection and again reassamble complete all as directed and specified by Engr in charge. Note :(i) Minior repairs are include the cost. (ii) If driver replacement requirment then measured and paid separately.

S & F in replacement of LED driver suitable for LED street light / flood light fittings(as requirment at site) of capacity upto 250 to 400 Watts of existing make complete as directed and specified by Engr in charge.

Cutting / Tiriming of Tree branches which are touching to HT over head lines and clearing the same up to 4 meter radius for span length not exceeding 45 to 55 meter complete all as specified and as directed by Engineer - in - Charge. (Note: Each span of 30-55 Mtrs will be considered as one length of span for payment purpose)

M & L for PVC insulated weatherproof unarmoured sheathed 1100 volts grade stranded twin core copper conductor cable of size 1.5 Sqmm including taking down the old unserviceable street light cables complete all as specified.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of standard conductor 6 sq. mm nominal cross section in service connections of complete connection all as directed and specified by Engr in charge.

Supply and fix pole mounted junction box (street light boxes) Top hinged Door fixed with hinbges on top of size 275mm x 135 x 110mm made out of FRP sheet with weather proof, locking arrangements vertical operated with one No. 6 /10 Amps MCB SP, EPOXY. Technical connector upto 8 ways, fixed on pole with 25mm x 3mm MS flat iron clamps and painting with two coats of synthetic enamel paint over one coat ofo red oxide primer for fixing clamps all as specified and directed inlcuding dismantling of existing u/s loop-in-box. Make-Syntex/Hensel

M & L for replacement of unserviceable MS clamp with new clamp made out of MS flat iron 25 x 5mm including fixing nuts bolts, washers etc and painting with two coats of syntetic enamel paint over a coat of red oxide primer complete all as directed

S & Fix PVC Moulded LED strip with water proof and IP 65 protection variant and bendable material of the streep design in pole (Tripple colour )as Indian flag patten/colour makes it ideal for flexible decoration including complete connection in pole as directed and specified by Engr in charge.Make : Crompton or Equilent in Havells/Philips Note :(i) Each colour strip contain length 5.0 Mtr. (ii) No any addl cost to be provided to the contractor.

Note : Above work / Item will be operated / execauted on as per planning / breake down and user requirment basis,so contractor will depute their man power as per requirment basis as directed by JE/Engr in Charge on telephoncally . No extra cost will provided to the contractor.

S&F in repairs for wall mounted 20 watts indoor inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat shrink provided for efficient dissipiation and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4'x18 watts complete all as specified and as directed Make : Halonix Cat Part No : LED INVERTER BATTEN HLB-08-20-CW-INV or Equivalent in WIPRO/HAVELLS

Teleconcepts (India) Pvt Ltd

S CHANDRASHEKAR (SREE BUILDERS)

Ashraya Nirman

GURU ENTERPRISES

Lucky Enterprises

HEERA CONSTRUCTION CO.

Meghana and Gowda Enterprises