STREET LIGHTING WORK ON SH62 TO PILUA HANUMAN MANDIR, ETAWAH

Supply and fixing of 9 mtr. G.I. Octagonal pole of approved make (top dia 70 mm, Bottom dia 155 mm & Base plate 16 mm thick) having 3 mm, thickness with sword type single arm bracket length of 1 mtr. length in 1:2:4 RCC foundation bolt including the cost of 3 Phase 4 way connector with backelite sheet / MCB in G.L Pole foundation, excavation & back filling and Required T & P complete in all respect with 2 coat of white cement on foundation. [MAKE:- Bajaj/ Philips/ Valmont/ VSTP/ KesclacSchreder]

Making suitable earth of H.T. overhead line pole with 2.5 Mts. long 20mm M.S rod connected with 7/16 SWG G.S. wire duly clamped & binded on pole including the cost of materials, labour and T & P required for proper completion of work as per direction of E/I.

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitable for 130 Watt and Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour. 13200-15600 system lumens, High Power LED with lenses, 120 Lm/W, PF>0.95, THD <10% at full load, CRI >70, Potted driver Set in Metal housing (Not Circuitory), Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4KV internal Surge protection, with 5 years warrantee. [Make:- Polycab/ Havells / Philips/ Jaquar/ Crompton]

Supply and fixing of 12.5 mtr. High mast shaft of approved make with rising system hot dip glavanized inside & out side dip, heaving pole sheet thickness 3mm. Top dia minimum 150 mm, bottom dia minimum 310mm, base plate 25mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6mm dia, double drum winch. including making suitable foundation as per manufature drawing/site reuiment along with foundation bolts nuts, washers, anchor plates etc complete in all respect.. As per PWD SOR-2024 SI No. 21.3 (Without GST Rate 246218x 0.8475 = 208669.75 Say Rs. 208670.00) [MAKE:-Bajaj/Philips /Valmont/ VSTP/ Kesclac Schreder]

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing with toughend glass/UV stabilized PC Cover and lenses built with mandatory driver set suitable for 150 Watt. Confirming to IP 66, IK 07 and above protection complete in all respect including Labour. 16800-18000 system lumens, High power LED with lenses, >120 Lm/W, P.F.>0.95, THD <10% at full load, CRI >70, Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-start feature, 4 KV internal Surge Protection, with 5 years warrantee. CAT-AAA [Make:- Polycab/ Havells/ Philips/ Jaquar/ Crompton]

Supply and Laying of Aluminium Conductor PVC insulated armoured served sheathed cables 1100V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in Charge complete in all respect including excavation and refilling. The armouring of the cable shall be properly connected with the earth conductor by clamps etc [Make:-Havells/Polycab/Grandlay /KEI]

16 Sqmm 4 core

35 Sqmm 3.5core