Vaious WSS under Section S531 Zone 1

Amount

1) NAME OF SCHEME:- GADO MAJRA, BLOCK RAJPURA , DISTT. PATIALA.

Component-1

Repair of OHSR

Repair of Expansion Joints Complete in all respects.

Providing & fixing MS Jali complete.

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Component-3

Dismantling & restrotion C.C streets dismantled during household Connection complete in all respect as setisfaction by Engineer-in-Charge.

2) NAME OF SCHEME:- MIRJAPUR/WAZIRABAD (2 Nos.) , BLOCK RAJPURA , DISTT. PATIALA.

Component-1

Minor Repair & Replacement of pipe line

Connection with existing PVC pipe including cost of PVC tee and PVC saddle piece and earth work in excavation & back filling complete in all respect (detail attached as per Annexure C)

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Component-3

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling complete in all respect (detail attached as per Annexure B)

PVC pipe 90mm o/d 6kg cm²

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling and restoration of Cement concrete Streets complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling of matalled road with Bithminous course 50 ti 75 mm thick with base course and making good the same to its original condition complete in all respect (detail attached as per Annexure G)

Dismantling & restrotion C.C streets dismantled during household Connection complete in all respect as setisfaction by Engineer-in-Charge.

3) NAME OF SCHEME:- UCHA KHERA, BLOCK RAJPURA , DISTT. PATIALA.

Component-1

Repair of OHSR

Repair of Expansion Joints Complete in all respects.

Repair of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect. (25000 ltr. Capacity) including Carriage.

Painting of OHSR pipes, railing & stair case etc complete in all respects including centring & shuttering. (As per Site)

Providing & fixing MS Jali complete.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).

Credit of old Sluice Valve

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Component-3

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

0.90x0.90m stze

Dismantling & restrotion C.C streets dismantled during household Connection complete in all respect as setisfaction by Engineer-in-Charge.

4) NAME OF SCHEME:- DHUMA, BLOCK RAJPURA, DISTT. PATIALA.

Component-1

Repair of OHSR

Repair of Expansion Joints Complete in all respects.

Repair of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect. (25000 ltr. Capacity) including Carriage.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).

Credit of old Sluice Valve

Minor Repair & Replacement of pipe line

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling.As Annexure -'B'

PVC pipe 90mm o/d 6kg cm²

Connection with existing PVC pipe including cost of PVC tee and PVC saddle piece and earth work in excavation & back filling complete in all respect. As Annexure -'C'

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Component-3

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling.As Annexure -'B'

PVC pipe 63mm o/d 6kg cm²

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

0.60x0.6m size

Dismantling of Cement concrete Streets complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling and restoration of Cement concrete Streets complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling of matalled road with Bithminous course 50 ti 75 mm thick with base course and making good the same to its original condition. As Annexure -'G'

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Dismantling and restoration of Cement concrete Streets complete in all respect as setisfaction by Engineer-in-Charge.

5) NAME OF SCHEME:- PEHAR KALAN AND PEHAR KHURD (2 Nos), BLOCK SHAMBHU KALAN, DISTT. PATIALA.

Component-1

Repair of OHSR

Repair of Expansion Joints Complete in all respects.

Construction of plinth protection around OHSR with masonry toe wall & inside earth filling with lead 5 kms. complete in all respect. (50000 ltr. Capacity) including Carriage. As Annexure -'A'

Painting of OHSR pipes, railing & stair case etc complete in all respects including centring & shuttering. (As per Site)

Providing & fixing MS Jali complete.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Credit of old Sluice Valve

Minor Repair & Replacement of pipe line

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling complete in all respect (detail attached as per Annexure B)

PVC pipe 90mm o/d 6kg cm²

Connection with existing PVC pipe including cost of PVC tee and PVC saddle piece and earth work in excavation & back filling complete in all respect (detail attached as per Annexure C)

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Component-3

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling complete in all respect (detail attached as per Annexure B)

PVC pipe 63mm o/d 6kg cm²

PVC pipe 90mm o/d 6kg cm²

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department

0.60x0.6m size

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling & restrotion of Cement concrete Streets complete in all respect as setisfaction by Engineer-in-Charge.

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Dismantling & restrotion C.C streets dismantled during household Connection complete in all respect as setisfaction by Engineer-in-Charge.

6) NAME OF SCHEME:- TASOLI, BLOCK RAJPURA , DISTT. PATIALA.

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

7) NAME OF SCHEME:- GAJJU KHERA, & HADAITPURA (2 Nos.) BLOCK RAJPURA, DISTT. PATIALA.

Component-1

Minor Repair & Replacement of pipe line

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling complete in all respect (detail attached as per Annexure B)

PVC pipe 63mm o/d 6kg cm²

PVC pipe 90mm o/d 6kg cm²

PVC pipe 110mm o/d 6kg cm²

Connection with existing PVC pipe including cost of PVC tee and PVC saddle piece and earth work in excavation & back filling complete in all respect (detail attached as per Annexure C)

Component-2

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)

Component-3

Providing, Stringing out PVC pipes ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications including earthwork excavation & back filling complete in all respect (detail attached as per Annexure B)

PVC pipe 63mm o/d 6kg cm²

PVC pipe 90mm o/d 6kg cm²

PVC pipe 110mm o/d 6kg cm²

PVC pipe 160mm o/d 6kg cm²

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department

0.60x0.6m size

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand grouting complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling & restrotion of Cement concrete Streets complete in all respect as setisfaction by Engineer-in-Charge.

Dismantling of matalled road with Bithminous course 50 ti 75 mm thick with base course and making good the same to its original condition complete in all respect (detail attached as per Annexure G)

Providing proposed water connection to household upto wall with providing MDPE pipe PN-16, 15mm 2 mtr. and G.I pipe (as per IS:1239) B-class, premium make such as Jindal Hisar as approved by Engineer-in-charge 15mm i/d 2.5 mtr., including cost of specials as as tees, bend, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with C.I bib cock 15mm i/d as per IS: 210 with stainless steel spindle of approved make complete for achieving optimal service delivery at least 10 hours water supply. (detail attached as per Annexure D)