Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.0 LAccepted-AOC 244 SHARDA VIHAR NEAR NEW HIGH COURT GWALIOR 474002 MP | GWALIOR | GWALIOR | MP | 474002 | ₹31.0 L Quoted ₹31.9 L | L1 | Accepted-AOC Being Lowest Bidder |
| 2 | L2₹32.9 LRejected-Finance | ₹32.9 L | L2 | Rejected-Finance Rejected not being L1 |
| Sl No | Description | Qty | Unit | Uma engineers L1 | Om Electricals L2 |
|---|---|---|---|---|---|
| 1.00 | Supply, installation, testing and commissioning of new sealed compressor unit, factory made, of Capacity 19/21 TR 3 phase 440 volt , complete with filled oil suitable for R-22/407/410 a Non CFC refrigerant gas and suitable size filter drier etc including disconnecting, vaccumissing, draining of chiller, leak test by charging nitrogen into system, electrical control wiring with existing controller and safety / tripping devices including dismantling & removing of old U/S compressor sealed unit of scroll type compressor carefully complete all as specified and directed.
Note : 1.Cost of refrigerant gas shall be deemed to be included in the quoted rates by the bidder and nothing extra shall be admissible on this account.
2. Contractor has to produce test certificate by OEM for compressor.
3. Price of filter drier deemed to be included in the quoted rates of compressor by the bidder.
4. Contractor shall submit manufacturer warranty & guarantee certificate of the compressor and this shall be applicable for the period over and including the defect liability period of the contract. | 2 | Each | 2,30,000 ₹4.6 L | 2,10,000 ₹4.2 L |
| 2.00 | Supply, installation, testing and comissioning of new sealed Compressor unit, factory made, of capacity 12.5 TR 3 phase 440 volt , complete with filled oil suitable for R-22/407/410 a Non CFC refrigerant gas and suitable size filter drier etc including disconnecting, vaccumissing, draining of chiller, leak test by charging nitrogen into system, electrical control wiring with existing controller and safety / tripping devices including dismantling and removing old U/S compressor sealed unit of Scroll type compressor carefully complete all as specified and directed.
Note : 1.Cost of refrigerant gas shall be deemed to be included in the quoted rates by the bidder and nothing extra shall be admissible on this account.
2. Contractor has to produce test certificate by OEM for compressor.
3. Price of filter drier deemed to be included in the quoted rates of compressor by the bidder.
4. Contractor shall submit manufacturer warranty & guarantee certificate of the compressor and this shall be applicable for the period over and including the defect liability period of the contract. | 4 | Each Job | 1,15,000 ₹4.6 L | 1,50,000 ₹6 L |
| 3.00 | Supply, installation, testing and commissioning of new shell and tube type condenser of capacity 25 TR as per sample of size 2.22 mtr length and diemeter 0.71 m factory fabricated with suitable size copper tube as per existing size, exterbal body of condenser power coated including mounting arrangement in existing system complete suitable for existing system 85 TR chiller capacity including connecting properly by all inlet and outlet water connection and controll wiring with existing contoller for safety and tripping devices including dismantling of existing brocken shell and tube type condenser unit carefully by blocking the complete supply and return water system complete all as specified and directed.
Make : Blue star model No YCD-21 or equivalent make specified in tender documents. | 2 | Each Job | 2,30,000 ₹4.6 L | 2,10,000 ₹4.2 L |
| 4.00 | Supply, installation, testing & commissioning of centrifugal pump sets 3000 RPM, 415 + 10% Volts, 50 Hz, 3 phase AC power supply of capacity 20 HP complete with suction and discharge of size 125 x 125 mm or matching to existing AC plant at P-77 and making connection of existing condenser / chilled water line and cable connection properly, complete with motor & common base frame, coupling guard, aluminium cladded insulation including taking down existing unserviceable brocken centrifugal pump set and motor complete all as specifed and directed.
Make : Kirloskar/ Crompton / Siemens / ABB.
Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the pump and this shall be applicable for the period over and including the defect liability period of the contract.
Note : Old retrieved pump set shall be deposited by contractor into AGE E/M Store yard for further safeguard. | 2 | Each Job | 95,000 ₹1.9 L | 80,000 ₹1.6 L |
| 5.00 | Supply, installation, testing & commissioning of centrifugal pump sets 3000 RPM, 415 + 10% Volts, 50 Hz, 3 phase AC power supply of capacity 7.5 HP complete with suction and discharge of size 80 x 65 mm or matching to existing AC plant and making connection of existing condenser / chilled water line and cable connection properly, complete with motor & common base frame, coupling guard, aluminium cladded insulation including taking down existing unserviceable brocken centrifugal pump set and motor complete all as specifed and directed.
Make : Kirloskar/ Crompton / Siemens / ABB.
Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the pump and this shall be applicable for the period over and including the defect liability period of the contract.
Note : Old retrieved pump set shall be deposited by contractor into AGE E/M Store yard for further safeguard. | 4 | Each Job | 48,000 ₹1.9 L | 40,500 ₹1.6 L |
| 6.00 | Supply, installation, testing & commissioning of centrifugal pump sets 3000 RPM, 415 + 10% Volts, 50 Hz, 3 phase AC power supply of capacity 5.0 HP complete with suction and discharge of size 65 x 50 mm or matching to existing AC plant and making connection of existing condenser / chilled water line and cable connection properly, complete with motor & common base frame, coupling guard, aluminium cladded insulation including taking down existing unserviceable brocken centrifugal pump set and motor complete all as specifed and directed.
Make : Kirloskar/ Crompton / Siemens / ABB.
Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the pump and this shall be applicable for the period over and including the defect liability period of the contract.
Note : Old retrieved pump set shall be deposited by contractor into AGE E/M Store yard for further safeguard. | 4 | Each Job | 42,000 ₹1.7 L | 30,500 ₹1.2 L |
| 7.00 | Supply and Fixing in repair butter fly valve of 40 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge. | 6 | Each | 2,400 ₹14,400 | 1,700 ₹10,200 |
| 8.00 | Supply and Fixing in repair butter fly valve of 50 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge. | 6 | Each | 2,600 ₹15,600 | 1,800 ₹10,800 |
| 9.00 | Supply and Fixing in repair butter fly valve of 65 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge. | 6 | Each | 2,900 ₹17,400 | 2,150 ₹12,900 |
| 10.00 | Supply and Fixing in repair butter fly valve of 80 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge. | 6 | Each | 3,100 ₹18,600 | 2,550 ₹15,300 |
Updated dates
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
3 Mar 2026, 6:00 pmClosed
CWE AF Gwalior
HQ CWE AF Gwalior
REPAIR / REPLACEMENT OF CONTROL AND SEFETY DEVICES AND OTHER CONNECTED WORKS OF AC PLANT AT AF STN GWALIOR
2026_MES_750271_1
86046
Open Tender
Electrical and Maintenance Works
180 days
GE AF Tech Area
As per NIT and tender documents
8 documents required · 8 mandatory
₹500
GE AF Tech Area
₹70,000
Yes
24 Mar 2026
28 Jan 2026
10 Mar 2026
28 Jan 2026
3 Mar 2026
12 Feb 2026
Supply, installation, testing and commissioning of new shell and tube type condenser of capacity 25 TR as per sample of size 2.22 mtr length and diemeter 0.71 m factory fabricated with suitable size copper tube as per existing size, exterbal body of condenser power coated including mounting arrangement in existing system complete suitable for existing system 85 TR chiller capacity including connecting properly by all inlet and outlet water connection and controll wiring with existing contoller for safety and tripping devices including dismantling of existing brocken shell and tube type condenser unit carefully by blocking the complete supply and return water system complete all as specified and directed. Make : Blue star model No YCD-21 or equivalent make specified in tender documents.
Supply, installation, testing & commissioning of centrifugal pump sets 3000 RPM, 415 + 10% Volts, 50 Hz, 3 phase AC power supply of capacity 20 HP complete with suction and discharge of size 125 x 125 mm or matching to existing AC plant at P-77 and making connection of existing condenser / chilled water line and cable connection properly, complete with motor & common base frame, coupling guard, aluminium cladded insulation including taking down existing unserviceable brocken centrifugal pump set and motor complete all as specifed and directed. Make : Kirloskar/ Crompton / Siemens / ABB. Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the pump and this shall be applicable for the period over and including the defect liability period of the contract. Note : Old retrieved pump set shall be deposited by contractor into AGE E/M Store yard for further safeguard.
Supply, installation, testing & commissioning of centrifugal pump sets 3000 RPM, 415 + 10% Volts, 50 Hz, 3 phase AC power supply of capacity 7.5 HP complete with suction and discharge of size 80 x 65 mm or matching to existing AC plant and making connection of existing condenser / chilled water line and cable connection properly, complete with motor & common base frame, coupling guard, aluminium cladded insulation including taking down existing unserviceable brocken centrifugal pump set and motor complete all as specifed and directed. Make : Kirloskar/ Crompton / Siemens / ABB. Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the pump and this shall be applicable for the period over and including the defect liability period of the contract. Note : Old retrieved pump set shall be deposited by contractor into AGE E/M Store yard for further safeguard.
Supply, installation, testing & commissioning of centrifugal pump sets 3000 RPM, 415 + 10% Volts, 50 Hz, 3 phase AC power supply of capacity 5.0 HP complete with suction and discharge of size 65 x 50 mm or matching to existing AC plant and making connection of existing condenser / chilled water line and cable connection properly, complete with motor & common base frame, coupling guard, aluminium cladded insulation including taking down existing unserviceable brocken centrifugal pump set and motor complete all as specifed and directed. Make : Kirloskar/ Crompton / Siemens / ABB. Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the pump and this shall be applicable for the period over and including the defect liability period of the contract. Note : Old retrieved pump set shall be deposited by contractor into AGE E/M Store yard for further safeguard.
Supply and Fixing in repair butter fly valve of 40 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 50 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 65 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 80 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 100 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 125 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 150 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
Supply and Fixing in repair butter fly valve of 200 mm dia, cast iron body, cast iron disc,nitrile rubber liner, integrally moulded close and body construction with hand lever, operated and rating of PN 10 with thermal insulation as per requirement of condenser and chilled water line complete all as specified and directed by Engr-in-Charge.
M&L for servicing /descaling of Hot water generator of capacity up to 170 KW, 3 phase, 415 volts and callibration, testing of all functions with including replacement of any minor defective parts such as bolts/nuts/screw etc complete all as specified and directed.
M & L for servicing/descaling of pan type humidifier complete of capacity up to 40 KW including cleaning of tank, heater connection and replacement of control wiring of heater with suitable wire, sensor, float valve replacement, water sensor wire, gasket for heater complete all as specified and directed.
Disconnecting and taking out existing unserviceable heater of humidifer / de-humidifer, any size and capacity and in any position complete all as specified & directed.
Supply and fixing Hot Water Generator heating element 14 KW complete as per existing make and model all as specified and directed
Supply and fixing Hot Water Generator heating element 3 to 5 KW complete as per existing make and model all as specified and directed
Supply and fixing Pan type humidifier heating element nipple type of size upto 5 KW complete as per existing make and model all as specified and directed
Supply and fix in repair autovent valve made out of brass suitable for hot water generator complete all as specified and directed.
Supply and fix in repair control module card with pla relay complete with control wiring with water sensor and heater assembly all as specified and directed
Supply and fix in repair water level switch / water flow switch / water flow sensor of existing make and model suitable for humidifier / de-humidifier complete all as specified and directed.
Supply and fix in repair LCD display for controller of hot water generator complete with control wiring with controller complete all as specified and directed.
Supply and fixing in repair complete controller with display and other connected accessories of PCB for hot water generator as per existing make and model complete with control wiring with sensor, heater assembly complete all as specified and directed .
Supply and fixing in repair step controller of hot water generator with rotating type switch with indicator and control wiring with heater assembly all as specifeid and directed.
S&F closed cell 19mm thick elastomeric nitrile rubber thermal insulation with aluminum foil laminated on one side, having thermal conductivity not exceeding 0.037 W/mK at a mean temperature of 20° C as per EN 12667, moisture diffusion resistance factor or ‘µ’ value of minimum 7,000 for base insulation material without the foil as per EN 12086, fire performance such that it passes Class 1 as per BS476 Part 7 for surface spread of flame and also fire performance of V0, HB as per UL 94, 1996, density without the foil between 40 to 55 kg/m³. The insulation material shall be FM (Factory Mutual) USA-approved and dust and fiber free. The Aluminium foil shall be 60 microns thick and its weight shall be 193gsm as per EN ISO 2286-2, with tensile strength 90N/15mm as per EN ISO 527-3 with elongation > 10% as per EN ISO 527-3 complete for Ducting including taking down the old unserviceable elastomeric nitrile complete all as specified and directed. (For duct insulation)
Material and labour for ISI marked 1.1 KV grade stranded copper conductor, XLPE insulated armoured cables of size 6 sqmm 3 core , conforming to IS : 7098 (Part I)-1988 having stranded copper compact shaped conductor as per CL.2, IS : 8130-1984, PVC inner sheath, single armouring of galvanised steel strip / wire and PVC type ST 2 outer sheath conforming to IS : 5831-1984, including termination complete as specified and directed by Engr-in-charge.
Material and labour for ISI marked 1.1 KV grade stranded copper conductor, XLPE insulated armoured cables of size 10 sqmm 3 core , conforming to IS : 7098 (Part I)-1988 having stranded copper compact shaped conductor as per CL.2, IS : 8130-1984, PVC inner sheath, single armouring of galvanised steel strip / wire and PVC type ST 2 outer sheath conforming to IS : 5831-1984, including termination complete as specified and directed by Engr-in-charge.
Material and labour for ISI marked 1.1 KV grade stranded copper conductor, XLPE insulated armoured cables of size 16 sqmm 3 core , conforming to IS : 7098 (Part I)-1988 having stranded copper compact shaped conductor as per CL.2, IS : 8130-1984, PVC inner sheath, single armouring of galvanised steel strip / wire and PVC type ST 2 outer sheath conforming to IS : 5831-1984, including termination complete as specified and directed by Engr-in-charge.
Material and labour for ISI marked 1.1 KV grade stranded copper conductor, XLPE insulated armoured cables of size 1 sqmm 1 core , conforming to IS : 7098 (Part I)-1988 having stranded copper compact shaped conductor as per CL.2, IS : 8130-1984, PVC inner sheath, single armouring of galvanised steel strip / wire and PVC type ST 2 outer sheath conforming to IS : 5831-1984, including termination complete as specified and directed by Engr-in-charge.
M & L for interlocking wiring for sequence operation of accessories of AC plant like chiller control panel, chilled water pump starter, condenser water pump starter, cooling tower starter, Aif handling unit starter, thermostate, humidistate, 3 way valve controller, water flow switch, water flow sensor, high pressure cutout, low pressure cutout etc complete all as specified and directed.
Supply, Installation, testing and commissioning of FRP cooling tower of not less than 125 TR heat rejection capacity with FRP water basin PVC fillings with CTI manufacturer integral louvers and drift eliminators complete with hot water basin either fitted with spray nozzles or having self rotating sprinklers, statically & dynamically balanced axial flow type fan direct driven or driven through reduction gear box with TEFC induction motor, suction screen, make up quick filling arrangement, over flow and drain connections with necessary valves and suitable inspection ladder, access arrangement for cooling lower interior, installed on MS girders (MS-I sections) fixed in masonry foundations with cement concrete footing, second class brick work and cement mortor1:6; all accessories, basin fittings, fan, fan motor suitable for 415 Volt supporting structure, anti vibration mountings etc including taking down existing brocken cooling tower from foundation complete all as specified and directed. Make: As per model No FM-6/9E/5 of Mihir or equivalent in Paharpur, Delta and BEL. Note :- Contractor shall submit manufacturer warranty & guarantee certificate of the FRP Cooling tower and this shall be applicable for the period over and including the defect liability period of the contract. Note : Old retrieved cooling tower motor with hub assembly shall be deposited by contractor into AGE E/M Store yard
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
Tender86046.pdf
Tender Documents • 1.12 MB
BOQ_840310.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid