WBPWD/EE/KNHED/NIQ-74/2nd Call /20-21

Amount

UPS Supply & instaallation 20 KVA (input 3PH /OutPut 3 Ph) Full Load PF: 09 true on line -Double Conversion IGBT Based Modular UPS System With External isolation Transformer & 30 Mins SMF Battery Back-up ,Power Cabinet With 3 nos of 6.66 KVA Module to be equiped with ambient temperature

Input Voltage :-380-415 V ,O/P Voltage -380-415 V .Input Frequency :-50 Hz +/-0.1%in free runing & +/-4% in Sync , Wave Form :-Sinusoidal. Minimum Backup at Rated Load - 30 Min ,Over Load :110% for 10 Min, 125% for 4 Minute .

Rippel:less than 2% ;Inverefficiency :>93% ,Battery 12 V Total VAH 18720 (or As Suitabel minimum 30 min Battery Back at rated Load) SMF Battery (VRLA) - Make-Exide/Amar Raja(Quanta) with minimum 2 years warranty;

Input/Output Terminal Conection :3P + N + PE Connection . Protection:-Input/Output over Vboltage ,under voltage,singel phase protection ,DC High under/over voltage ,Battery Charging Over Current ,Output Over load/Short Circuit Oveer temp.

Ups autoon on Mains recovery ,Audio alarm mains fail , Battery Low,pre Alarm Inverter trip ; METERING:-LCD Display for input/Output -Voltage, Frequeency ,Current,battery Voltage & Current

Switch gear :-MCB/MCCB for input ,Battery ,Output Manual Bypass Switch ; Noise Level :<75 Db at 1 mtr distance ;Protection Degree:-IP 21;Cooling -Forced Air ; Standard Warranty :-2 years on site repair or replacement ,

Standard Warranty :- 2 years on site repair or replacement,Start up service ,Make-Numeric/AVO/APC/Emmersion

E.I. Portion Supplying and fixing 415V 6/10A, 8 way TPN MCBDB (Legrand/L&T make) comprising with of 1no. 63A FP Isolator and 24 nos.,(6- 32)A SP MCB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment

Distn. Wiring in 1.1Kv gr. 2x1.5 sqmm +1x1.5 sqmm single core stranded FR PVC insulated & unsheathed cu. Wire (Make: RR Kabel/Havells) in 20 mm bore, 3mm thick polythene pipe complete with all accessories surface on wall to light/fan/call bell points with piano type switch (anchor) fixed on GI switch board cum JB on wall complete with 2 nos suitable size Ph &N Cu bar incl. Bakelite/Perspex top cover 3 mm thick and incl. 175 x 100 x 65 mm inspection box, making earthing attachment incl mending good damages as to G.S. a) Avg run 12 mtr

S&F (10" x 8") Computer board with bakelite top cover on wall comprising of 1no 15A plug socket with 15A piano key (Anckor make) switch , 1no 16A MCB & 1no indicator & 3nos. 5A plug socket with 5A piano key type (Anchor make) switch including necessary interconnection complete with 3nos Cu Bar 7way with double chair with necessary interconnection (Make: KEI/polycab) complete brush nut bolt and MS box 2 powder coated paint with good finishing

Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FR’ PVC insulated & unsheathed cu. wire (Havells / KEI / Finolex) in 20/32/40 mm size PVC rigid conduit ‘FR (precession) incl. necy. Fitting as reqd. a) 2 x 2.5 sqmm + 1x 1.5sqmm for ECC

b) 2 x 4 sqmm + 1 x 2.5 sqmm for ECC

c) 2 x 6 sqmm + 1 x 4sqmm for ECC

d) 4 x16 sqmm + 2 x 10 sqmm for ECC

Finishing end of copper wire and PVC/Al cable of the following sizes by crimping method as per GS a) 16 sqmm

b) 10 sqmm

c) 6 sqmm

d) 4 sqmm

e) 2.5 sqmm

f) 1.5 sqmm

S&F ("18 x 11") bakelite top cover (White Colour) on wall comprising of 2nos 15A plug socket with 15A piano key type (Anchor make Brown colour) switch with 5A 4nos Switch, 4nos 5pin socket (Make: Anchor Brown colour) including 1no 16A MCB (Havells Make) with 3nos Cu Bar 12way with double chair with RED LED indicator (approve make) necessary interconnection (Make: RR Kabel FRSHOH Avg run 4mtr) complete brush nut bolt and MS box 2 powder coated paint with good finishing

S&F (7" x 4") separate plug board with bakelite top cover (White colour) on wall comprising of with 5A 2nos Switch and 5A 2nos Socket (Make: Anchor white colour) including interconnection (Make: RR LSHOH) complete brush nut bolt and MS box 2 powder coated paint with good finishing

S&F (7" x 4") separate plug board with bakelite top cover (White colour) on wall comprising of with 15A 1no Switch and 15A 1no Socket (Make: Anchor white colour) including interconnection (Make: RR LSHOH) complete brush nut bolt and MS box 2 powder coated paint with good finishing

E.I. for AC Machines Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FR’ PVC insulated & unsheathed cu. wire (Make: RR Kabel/ Finolex/polycab) in 32 mm size PVC rigid conduit ‘FR’ (Make: Precision) incl. necy. fitting as reqd. a) 4 x 10 sqmm + 2 x 6 sqmm for ECC

b) 4 x 16 sqmm + 2 x10 sqmm for ECC

Supplying & fixing double door SPN MCB Distribution board with IP-42/43 protection , concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter comnnection with sutiable size of copper wire and neutral link & provision for earthing attachment 2+8 way Enclosure (607711) make- Legrand / L&T

S&F (10" x 8 " ) MS Board (Loop Box) with single door system deep 5 inch. With 1 no. channel for 4 pole MCB insulation on wall including necessary interconnection complete

Supply and fixing 240/415 V MCB of breaking capacity 10 KA & C charectyeristics on din rail of existing DBs and necessary connection (make-Legrand) as per GS a)63A , Four Pole

b) 63A , Three Pole

Finishing the end of copper wire of the following sizes by crimping method as per GS a) 10 sqmm

b) 16 sqmm

Cost of iron clamp 8"x12" x1' for laying PVC conduit over the existing laying cable on wall as per GS

Supply of 3 ph timer for controlling 2 nos. 3-ph A.C. MC(consealed split) of size 8.5 Tr. Consisting of the following a) 14 inch. X 12 inch x 6 inch. -double door MS Box b) Astronomical Timer , -999 hrs. (make-Siemens/L&T ) , Cat No. 7PV07321AV20) , C) 4P MCB 415V/63A-1 NO.(make-Siemens/L&T) , Cat no. 5TL44327RC , d) 4P Isolator 1no.(make-Siemens/L&T) , Cat no. 5TL13320 , e) 4 pole power cotactor of required rating -2 no. (make-Siemens/L&T) , Cat no. MNX701597076 type , f) DB locking arrangement must be there , g) 6A MCB , h) Push bottom ON/OFF switch indivisual outer side of DB (There must be bypass mechanism and indication for ON/OFF by indicating lamp of the AC m/c unit attached to it )(For double Air-Conditioner Machine )

E.I. for UPS system S&F 415V 6/10A, 4 way TPN MCBDB (Legrand/L&T AU make) comprising with of 1no. 63A FP Isolator and 12 nos., 10-32A SP MCB as per G.S.

S&F 415V 6/10A, 4 way SPN MCBDB (Legrand/L&T AU make) comprising with of 1no. 32A DP MCB and 2 nos., 6-10A SP MCB as per G.S.

Distn. Wiring in 1.1Kv gr. 2x1.5 sqmm +1x1.5 sqmm single core stranded FR PVC insulated & unsheathed cu. Wire (Make: RR Kabel/Havells) in 20 mm bore, 3mm thick polythene pipe complete with all accessories surface on wall to light/fan/call bell points with piano type switch (anchor) fixed on GI switch board cum JB on wall complete with 2 nos suitable size Ph &N Cu bar incl. Bakelite/Perspex top cover 3 mm thick and incl. 175 x 100 x 65 mm inspection box, making earthing attachment incl mending good damages as to G.S. a) Avg run 12 mtr

Distn. Wiring in 1.1 Kv gr. Single core stranded ‘FR’ PVC insulated & unsheathed cu. wire (Make: RR Kabel LSOH) in 20/32 mm size PVC rigid conduit ‘FR’(Make:Aprove make) incl. necy. Fitting as reqd. a) 2 x 1.5 sqmm + 1 x 1.5 sqmm for ECC

b) 2 x 4.0 sqmm + 1 x 2.5 sqmm for ECC

c) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

d) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC

S&F (15" x 9") separate plug board with bakelite top cover (Sky colour) on wall comprising of 1no 15A plug socket with 15A piano key type (Anchor make Brown colour) switch with 5A 4nos Switch, 4nos 5pin socket (Make: Anchor Brown colour) including 1no 10A MCB (Havells/L&T Make) with 3nos Cu Bar 7way with double chair with Green LED indicator necessary (approve make) interconnection (Make: RR Kabel FRSHOH Avg run 4mtr) complete brush nut bolt and MS box 2 powder coated paint with good finishing

S & F indoor 18 Watt LED Fittings complete on false celing with necy. Connetion asper direction of EIC.(Make Crompton Greaves/Philips cat no DN395BLED20S-6500 PSU WH )

S & F MS box (10" X 10") for fixing of LED circular light (15watt/18watt) with fast nut on celing with 4nos screw nut as per GS

S & F indoor 6 Watt LED Fittings complete on false celing with necy. Connetion asper direction of EIC.(Make Crompton Greaves/Philips cat no DN391BLED6S-6500 PSU /WH )

S&F (5" x 5") separate plug board with bakelite top cover (White colour) on wall comprising of with 5A 2nos Switch (Make: Anchor white colour) including interconnection (Make: RR LSHOH) complete brush nut bolt and MS box 2 powder coated paint with good finishing

Earthling with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt.long) to be filled with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonry enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep (below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement mortar (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode

Supplying & fixing earth bus bar of 25 mm x 6 mm copper on wall having clearance of 6 mm from wall including providing drilled holes on the bus bar complete with copper bolts, nuts, washers, spacing insulators etc. as required as per G.S.

Providing and fixing 25 mm x 6mm copper strip on surface or in recess for connections etc. as required [page no-27,item no-5.14, chapter-Earthling, Delhi schedule of rates (E&M)2018]

Providing and fixing 25 mm x 6 mm copper strip in 40 mm dia G.I pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. [page no-26,item no-5.10, chapter- Earthling, Delhi schedule of rates (E&M)2018]

Earthling the installation by 2" ( 50 mm) dia ISI (M) GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed as per G.S.

Supplying & fixing earth bus bar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as per G.S.

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cmx86.36cmx46cm deep (below ground level) complete with cemented brick work (1:6) of 25cm width duly plastered with cement mortar (inside) Cl hinged inspection cover of size 36.56cmx35.56cm with locking arrangement ,GI reducer including drilling of 46 nos. 12mm dia holes on the GI pipe.

Extra for treatment of soil by using salt & charcoal or coke for plate electrode earthling.

Excavation of soil for insulation of earth electrode and filling & ramming for soft soil.

Connecting the equipments body to earth bus bar including S &F 20 mm x 3mm G.I strips galvanized (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Providing of Tag mark of cable of different sizes as per direction of EIC

Finishing the end of copper wire of the following sizes by crimping method as per GS a) 1.5 sqmm

b) 2.5 sqmm

c) 4.0 sqmm

d) 6.0 sqmm

S & D of Single LED Tube light 18/20 Watt LED tube lamp [Make - Philips Master LED tube model no.18W 865 T8 I 2100lm / Crompton cat no. LTT8-20 / Wipro cat no.- LL13-181-65SE ]

Supply and Fixing Tripod style inverted pyramid bollard of made up of aluminium casting with acrylic diffuser for soft illumination effect 240 V , 50Hz Make: Crompton Greaves Cat no LBLSN-10-CDL as per direction of EIC

Supply and fixing 210W LED light Tempo LED luminaries complete with all accessories (Make: Philips cat no : BVP415 LED 210 CW HE NB FG S3 XT) fixed on arm bracket with necy connection

S & D new 2.5 MFD. Condenser (Make : TIBCON)

S & F 6A MCB (Make : Legrand) on existing SPNDB as per GS

Supply and fixing 10W LED light Endural LED Bulkhead luminaries complete with all accessories (Make: Philips cat no : WT202W LED 6S NW PSU S2 PC) fixed on wall with necy connection

Providing CC (6:3:1) muffing 600 x 600 x 760mm size or equivalent size of cylindrical muffing above ground level around the pole base complete with3mm thick neatly finished cement plaster all round incl. S&F 200 x 150 x 100 MS loop box.

S & F 80mm dia 1.5 mtr long G.I pipe pole (ISI medium) with 150 x 150 x 8mm sole plate welding with drilled hole at bottom on the pole incl. S & F 1.5mtr long 40mm dia single steel arm bracket incl. S&F Nut, bolt washer incl. painting 2 coats of approved paint as per direction of EIC.

(Rate should be quotated including all taxes and duties)

T.D.K. ENTERPRISE

M/s Singh Electrical Works

JAYBEECO

TECHNO ENGINEERS AND SERVICES