SPL PREPAIRS TO CERTAIN SERVANT QUARTERS OF OMQs at HQTC

Amount

Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed.

Taking down of chowkats or frames exc 1.5 sqm but not exc 4 .0 sqm each (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed.

S&F 2nd class HW plain chowkhats and framed,rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick factory made 2nd Class Hard wood Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, size of members of shutters complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sliding window and ventilator shutters, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and as directed. Note : Sheet Glass and SS wiremesh shall be measured & paid separately.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less then 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed. Note : Sheet Glass and SS wiremesh shall be measured & paid separately

S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including beads complete all as specified and as directed.

S&F in 4.8 mm thick sheet glass ordinary quantity and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F 75 mm long Mortice latch with two levers (vertical type), brass body and fixed complete all as specified and as directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed.

S&F 100 mm long Extruded brass handles, fabricated type polished complete all as specified and as directed.

S&F 150 mm Aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.

S&F 200 mm Aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 300 mm size mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs fancy type Stainless Steel curtain rod 25mm dia with suitable SS brackets with suitable wooden round base and fancy type end top matching to curtain rod of make as approved by GE complete all as specified and as directed. Note: Additional supporting bracket shall be provided if length is exceeding 1.2m and rate quoted shall include for the same.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.,disposal of unserviceable materials, debris and rubbish to a distance complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (20 mm graded aggregate) exc. 10 cm in width and setting in mortar 1: 6 complete all as specified and as directed.

M&L for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 ( 20 mm graded aggregate) and setting in mortar 1: 6 , complete in walls all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement. including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed. Note: WPC shall be measured & paid separately.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:6,finished even and smooth without using extra cement complete all as specified and as directed.

M&L fo Rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:3 in ceiling of chajja,roof projection,shelve etc and finished even and smooth without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound of approved quality complete all as specified and as directed.

Dismantling structural steel work including doors, gates and similar works but excluding framed truss complete all as specified and as directed.

S&F mild steel trusses, purlins, fencing posts,crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat section) Conforming to FFe-410- W(Gde?E-250) quality' A' including distance pieces, cleats , nut & bolt any size & length etc complete all as specified and as directed.

S&F Mild steel flats (40x6 mm thick) for hand rails, wind ties, posts and struts in fencing screwed or welded to shape as directed, including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe 410-O or Fe 310-O complete all as specified and as directed.

M&L for Plain Cement Concrete Type B0 , 1:2:4 (using 12.5 mm graded stone aggregate) cast in situ in cills and other similar bands, plinth courses, parapets, copings, hold fast ,bed plates ,filling hollow section of pressed steel frame and the like including use and waste of form work,weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J hooks and bolts complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L PCC type D2 ,1:4:8 (Using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L 40 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate) as in flooring, complete all as specified and as directed.

M&L 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) for hard standing including finishing the surface even and fair complete all as specified and directed.

M&L for PCC type C2 ,1:3:6 (Using 40 mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile 300mmx 300mm, in floors etc. set and jointed in neat cement slurry over and including a 15 mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured/ digital/ stone finish wall tiles in vertical surface 600x300x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 for backing of tiles complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) including finishing the surface even and fair complete all as specified and directed.

M&L for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement & pigment in floors with 15 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L Machine pressed precast conctete glossy finish interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade and pointed with grey cement mixed with pigment to match complete all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for sand cushioning including watering for Interlocking tiles complete all as specified and as directed. Note- Punned thickness of sand i.e 18 cm shall be considered for measurement purpose.

M&L for Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound, grade 'A' all as specified and directed.

M&L for preparing new plastered surfaces and applying three coat of white wash on surfaces of ceilings complete all as specified and as directed.

M&L for preparing old plastered surfaces and applying two coats of white wash on surfaces of ceilings complete all as specified and as directed.

M&L for preparing new plastered surfaces and applying through mechanical meansTwo coats of cement base paint over a coat of alkali resistant primer on surfaces of walls complete all as specified and as directed.

M&L for preparing old plastered surfaces and applying one coat of cement base paint through mechanical means complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 2 mm thickness plaster of paris putty to prepair the surface even and smooth complete all as specified and directed.

Complete removal of existing treatment of old plastered surfaces of walls and applying through mechanical means Two coats of oil bound distemper over a coat of alkali resistant primer over and including applying 1 mm thickness plaster of paris putty to prepair the surface even and smooth complete all as specified and directed.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Complete removal of existing treatment of walls and applying two coats of exterior emulsion apex paint (weather coat) over a coat of approved primer complete all as specified and as directed.

M&L for applying a coat of blown industrial bitumen of grade 85/25 or 90/15 applied hot to concrete, wall surfaces @ 1.2Kg/Sqm or as required including cleaning the surfaces all complete all as specified and as directed.

S&F in repairs Stainless steel kitchen plate rack of size 750mm x 600mm x 250mm, made of 1mm thick stainless steel sheet complete all as specified and as directed.

Taking down rain water pipes including all fittings any size and pattern upto 10th storey floors complete all as specified and as directed.

S?&F 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F 75 mm dia PVC Bends with access door complete all as specified and as directed.

S&F 110 mm dia PVC Bends with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

Taking up or down 20mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 25mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 32mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc l0cm girth in brick walls complete all as specified and as directed.

Supplying and laying of 32mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and as directed.

Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and as directed.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls ,ceilings or laying in floors including all fittings complete all as specified and as directed.

S&F PPR Gate valves (brass insert) of 25mm dia with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15 mm bore chromium plated fancy type long body bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs fancy type 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs PVC connection 15mm size 450mm long with CP PTMT nuts complete all as specified and as directed.

S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repairs standard PVC waste pipe 32mm dia.,complete for WHB complete all as specified and as directed.

Dismantling water tanks exc 500 ltrs and n exc 1000 ltrs complete all as specified and as directed.

Supply, hoisting, fixing in position 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layer connecting incoming and outgoing pipes complete all as specified and as directed.

S&F in repairs 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs 100mm dia stainless steel gratings without hole /with hole of min weight 50 gms complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (minimum weight 455 gms) complete all as specified and as directed.

S&F in repairs PVC Flushing cistern 10 Ltr capacity valveless syphonic action type low level, white, with inlet ,ball valve float and handle including brackets and flush pipe complete all as specified and as directed.

S&F in repairs 32 mm dia Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs fancy type 15 mm bore angle stop valves,chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs fancy type wall mount SS-304 premium grade stainless steel soap holder/stand size 11.5(l) x 8.5(b) x 5.5(h) cm fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair Vitreous china wash down water closet (Pedestal pattern, ETWC), white (including fixing bolts, Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, with trap set and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as directed.

Removal of plants/ bushes with roots from wall and concrete surfaces and applying herbicide 2,4-Dichlorophenoxyacetic acid as require and make the disturbed area with PCC (1:2:4), type B0 (Using 12.5 mm graded stone aggregate) or Cement mortar 1:4 complete all as specified and as directed.

Removing building materials etc.to a distance of 10.0 km , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan,socket or power) complete, including fittings & fixtures such as switches, sockets,ceiling rose, pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified & directed.

M&L for point wiring with 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, round/ square PVC blocks at junction for batten holders, ceiling rose etc ,screws, gutti / roul plugs PVC all as per site requirements including fixing on stone walls / brick masonary walls /ceilings /floors etc heavy duty plastic terminal boxes for mounting of switches/ sockets/regulator etc and 1.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed for the following :-

One light point controlled by one single pole 5 Amps switch.

One Ceiling fan point controlled by one single pole 5 Amps switch.

One 5 pin socket point 5 Amps on independent board.

One 5 pin socket point 5 Amps on same board with other switches.

One bell point controlled by one push button 5 Amps switch on independent board.

All as per item No-101.00 here-in-before but for power point wiring with 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable and 2.5 Sqmm PVC insulated, unsheathed, FRLS multistranded copper conductor 1100 volt grade cable as continuous earth lead for 6 pin 6/16 Amp switch socket outlet on heavy duty plastic terminal boxes independent board complete all as specified & directed.

S&F switch piano flush type 5 Amp single pole, one way 230 volt complete all as specified and as directed.

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 volt complete all as specified and as directed.

S&F switch piano flush type 15 Amp single pole, one way 230 volt complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 6/16 Amp, flush type universal, 230 volt complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate type with back plate suitable for angle / batten fitting complete all as specified and as directed.

S&F stepped type electronic fan regulator double space rotary 5 speed type 300 watt 230 volt complete all as specified and as directed.

S&F PVC ceiling rose 65 x 50 mm surface type with 3 terminals 230 volt complete all as specified and as directed.

S&F call bell ding dong type 230 Volt single pole including T.W board open recessed type of size 175x100x40 mm covered with hylam sheet complete all as specified and as directed.

S&F bell push flush type one way 5 Amp 230 Volt complete all as specified and as directed.

S&F LED Light fitting, 4 feet 1x20 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED mirror Light fitting 2 feet, 10 Watts, 220 volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED light fitting 9/ 10 Watts bulk head Luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including brackets made out of 50 mm dia light grade GI pipe 1.50 mtr long bent to shape and size as per site requirement for fixing of street light fitting on poles/ walls including Flat Iron clamps=02 Nos of size 30x5mm made to shape incl nuts,bolts & washers complete all as specified & directed.

M&L for sub main wiring with two single core 2.5 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 2.5 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed. Note-Two runs of 2.5 sqmm single core cable and one run of 2.5 sqmm earth wire including PVC casing & capping together shall be measured as one unit.

M&L for sub main wiring with two single core 4.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 4 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed. Note-Two runs of 4.00 sqmm single core cable and one run of 4.00 sqmm earth wire including PVC casing & capping together shall be measured as one unit.

M&L for sub main wiring with two single core 6.00 sqmm PVC insulated ,unsheathed , FRLS multistranded copper conductor 1100 volts grade cable in and including heavy grade PVC Casing & Capping ISI marked broken white or of cream colour with all accessories such as tee,bend,joint cover etc, screws, gutti / roul plugs PVC all as per site requirements including fixing on surface on stone walls / brick masonary walls /ceilings /floors etc with 6.00 sqmm PVC insulated,unsheathed, FRLS multistranded copper conductor 1100 volts grade cable as a continuous earth wire and connected to common earth dolly complete and making good to disturbed surfaces/wall with plaster & matching with the existing colour of wall/floor etc all as specified and colour coding of cables such as Phase- Red, Neutral-Black, and Earth-Green complete all as specified & directed. Note-Two runs of 6.00 sqmm single core cable and one run of 6.00 sqmm earth wire including PVC casing & capping together shall be measured as one unit.

M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron wire 4 mm dia as earth lead up to test point with suitable size GI nuts/bolts, washers,check nut and brazed properly up to main board,LT panel etc and adequate quantity of charcoal and salt 15 cm around the earth plate including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with 8mm dia TMT bars 3 Nos both way including CI cover 10 mm thick with hinged and frame of angle iron 25x25x6mm with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15 mm bore up to main board complete all as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified and directed. Notes: (i) The unit rate shall include 15 mm dia GI pipe up to 7.5m for protection of earth lead. (ii) The unit rate shall include galvanised iron wire 4 mm dia from earth electrode to test point up to 7.5 meter (iii) In case measured value of earth resistance of each earthing is recorded more than 3 ohms then the earthing shall be re done by the contractor without any extra cost to the department.

S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing 4 mm dia galvanised iron or steel wire complete all as specified and as directed.

S&F Sheet metal enclosure for DB's double door SPN,4 ways when MCBs to be used single pole and neutral, with 200 Amps rated copper bus bar 230Volt, complete all as specified & directed.

S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral, with 200 Amps rated copper bus bar 230Volt, complete all as specified & directed.

S&F MCB SPN, 40 Amps, 230 V, C- series with breaking capacity of 10 KA complete all as specified & directed.

S&F MCB SP, 6-32 Amps, 230V, C- series with breaking capacity of 10KA complete all as specified & directed.

S&F LED Bulbs 10 Watts, BEE star rated energy efficient Retrofit bulb,complete all as specified & directed.

chowdeshwariconstructionco (BID ID -3524937)

raashi constructions (BID ID -3522115)