Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC | L1 | Accepted-AOC AOC Awarded | |
| 2 | L2₹44.7 L+₹1.3 L (3.10%)Rejected-Finance MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹45.3 L+₹2.0 L (4.54%)Rejected-Finance | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹46.1 L+₹2.7 L (6.28%)Rejected-Finance | L4 | Rejected-Finance Other than lowest quoted tenderer | |
| 5 | L5₹48.6 L+₹5.2 L (12.0%)Rejected-Finance 139 11 104 MUTTHIGANJ ALLAHABAD UTTAR PRADESH 211003 | PRAYAGRAJ | UTTAR PRADESH | 211003 | L5 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹99,000
Closing Date
5 Aug 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST ALLAHABAD
GE WEST ALLAHABAD NEW CANTT ALLAHABAD
SPL REPAIR TO QTR NO P-9/1 AND P-9/2 OF CAPT ACCN AT CHHEOKI AND CERTAIN OTHER WORKS AT CHHEOKI AND NEW CANTT ALLAHABAD
2022_MES_520312_4
8545/E8
Open Tender
Civil Works
Item Rate
180 days
NEW CANTT ALLAHABAD
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE WEST ALLAHABAD
₹99,000
Yes
29 Aug 2022
1 Jul 2022
8 Aug 2022
1 Jul 2022
5 Aug 2022
22 Jul 2022
Amount
Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles
Dismantling of wrought iron or mild steel work of any description not otherwise provided for
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil.
M & L for rough excavation from soft/loose soil not exceeding 1.5 m deep and getting out from defence land
Spreading and levelling in layers n exc. 25 cm thick in Soft/loose soil.
M & L for PCC 1:5:10 type E2 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.
M & L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed .
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed
Use & waste of formwork to side of concrete foundation footings base of col for rough finish surface.
Use & waste of formwork to side of pillers, col. ,beam etc.fair finished surace for rough finish surface.
M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M & L for mild steel TMT bars 5mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders complete all as specified and directed.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, surface finished even and fair, complete all as specified and directed.
M & L for two coats of cement base paint on wall over a coat of cement primer incl preperation of new platered surfaces complete .
M & L for two coats of Oil bound distemper on wall surfaces including preperation of new plastered surfaces over wall care putty complete all as specified & directed.
M & L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide complete all as specified and directed.
M & L for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described, and applyingone coat of synthetic enamel paint over a coat of primer all as specified and directed
S & F for purlins, crane gantries, rails and fastenings and heavy bracket framing of Fe- 290(Gde E-165)(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified & directed.
S & F of Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm and n exc 22.5cm long complete all as specified and directed.
S&F mild steel plates (plain or chequered) with riveted, bolled or welded attachments confirming to FE -290 Gde E-165) plain orchequered complete all as specified and directed.
M & L for first or premium quality Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
S&F 4mm thick non asbestos fibre cement bldg board of 595mm x 595mm in size decorative finish with and including powder coated GI false ceiling grid (of ceiling suspension system) of 600mm x 600mm size and galvanised main Tee and cross Tee incl wall angle grid hanging with including 4mm dia GI wire roof/ceiling fasteners of butterfly clips etc complete all as specified and as directed.
S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water complete all as specified and directed.
M& L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth with out using extra cement all as specified and directed.
M& L for rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth with out using extra cement all as specified and directed.
M& L for rendering 10mm thick cement plaster brick work or concrete surface of ceiling in CM 1:3 finished even and smooth with out using extra cement all as specified and directed.
M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4 for layin of floor finishes all as specified and directed.
M&L for preparation of pllastered or unplastered new surface of wall and applying three coat of white wash complete all as specified and directed.
M&L for preparation of plastered or unplastered new surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of old surface of wall ,complete removal of existing treatment ,including washing, rubbingdown ans stopping old distempered and painted surface of wall preparing the surface even and smooth using wall care putty and applying two coat of oill bound distemper complete all as specified and directed.
M&L for preparation of old surface of wall ,complete removal of existing treatment ,including washing, rubbingdown and stopping old distempered and painted surface of wall preparing the surface even and smooth using 3mm thick all care putty and applying two or more coat of acrylic smooth exterior emulsion paint of required shade fungal resistance,dirt resistance exterior paint applied @1.67 litre/10sqm over and including primin coat of exterior primer applied 2.20 litre/10 sqm complete all as specified and directed.
M&L for preparation of old surface of ceiling making surface even and smooth using wall care putty and applying two coat of white wash complete all as specified and directed.
M&L for cutting chases, pinning in. ,making good where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades,shelves, llintels,etc and cutting chases for coccealed water tubing PVC pipe or etc.and making good. cuttingconduits wiring
M&L for brick workwith sub class ,B, bricks old size straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed
M&L for brick work with sub class ,B, bricks old size straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed
M&L for cement concrete type B1, 1:2:4(using 20mm graded stone aggregete) 25mm thick in floor complete all as specified and directed.
M&L for cement concrete type B1, 1:2:4 (using 20mm graded stone aggregete) as in bed block for hold fast, all as specified and directed.
M&L for cement concrete type B1 1:2:4 using 20mm graded stone aggregate as lintels upto 1.5 m clear span, cvills, steps, seismic and other similar bands, plinth coueses, lacing cources, parapers and railing upto 60cm in height, coping, kneeters, apex stone,bed plate kerbs ,water troughs andf the like including weathering,slightly rounded or chamfered angles anf throating as directed.
M&L for reinforced cement concrete type A1 1:11/2 :3 using 20mm graded stone aggregate as inslabs supported on walls,beams,and columns in roofs, roofs, landings, balconies, canopies,deck slab, and in shelves and the like complete all as specified and directed
M&L for reinforced cement concrete type A1 1:11/2 :3 as in chajjas and the like complete all as specified and directed
M&L for 20 mm thick granite(of any type)work (table rubbed and polished) in steps, jambs,pillare,wimdow cills,cooking platforms and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite alll as specified and directed
M&L for providing edge moulding of 18-20mm thick granite of counters vanities etc. Incliuding machine polishing to edge to give high gloss finish etc complete all as specified andf directed.
M&L for first or premium quality glazed ceramic tiles colouredin vertical surface 300x250x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to mach complete all as specified and directed.
M&L for first or premium quality non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular)area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match comlplete all as specified and directed.
M&L for first or premium quality glazed ceramic tiles coloured in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to mach complete all as specified and directed.
M&L for first or premium quality vitrified tiles dark shade 10mm not exc 0.36 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified
S&F framed work Fe-410 Gde-E-250 qualityA) as in doors or gates of angle or other section with gusset plate,rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting(excusive of steel sheeting or other covering,running rails,and guides) and hanging, also fastening and fixing complte all as specified and directed.
Taking down chowkats or frames with shutters(without taking off shutters from the frame) not exc 1.5sqm each . complte all as specified and directed.
Taking down chowkats or frames with shutters(without taking off shutters from the frame) exc 1.5sqm but n.exc 4 sq.m complte all as specified and directed.
Taking down shutters of any description n exc 1 sq.m each
Taking down of shutters exc. 1 sq.m but not exc. 2 sq.m each
S&F of 35mm thick flush shutters, solid core construction, with block boared core and plywood face panels,commercial type on both faces including 5mm thick teak wood bidding all around, complete all as specified and directed.
S&F 30mm thick IInd class hard wood panelled shutters(any numbers of panel) with panels of timber flaton both sides (featherd edged) or veneered particle board medium density, wood particle board with commercial face veneers
M&L for cutting holes in brick wall built in cement mortar or cement lime mortar for inserting hold fasts etc, half bricks but not exc. One bricks and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
Use & waste of form work to soffits of suspended slab such as roof slab, floor slabs, shelves landing and similar work s not exc. 200mm thick (horizontal or sloping ) flat surface finished even and fair complete all as specified and directed
S&F aluminium anodised 150mm long barrel tower bolts of extruded section all as specified and directed
S&F aluminium anodised 125 m long barrel tower bolts of extruded section all as specified and directed
S&F 100 mm mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed
S&F of 75 mm mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed
S&F of 300mm mild steel ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S&F of 150mm alumunium anodised handle cast type all as specified
S&F of 100mm alumunium anodised handle cast type all as specified and directed.
S&F brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flanges
S&F of framed work such as grills,gratings, etc,with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusteres, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed
S&F of mild steel work as in bands,straps,supports or stays for rain water,ventilating pipes,including bolts if required, hooks(stay) heavy, for large gates hooks and pintle hinges large hasp ans staoles, chains, hand made sliding bolts,clamps hold fasts wall ties, hooks for hanging fans,plain angle cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed
S&F of steel windows with side hung shutters including projectin type hinges with steel handle and steel peg stay,complete with glazing bars,dovetail or welded including one shop coat primer complete all as specified and directed.
S&F of steel ventilators with top hung shutter including hinges, steel peg stay, including one shop coat primer complete all as specified
Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing removal to stend
Taking up or down steel tubing 20mm bore of pipe and connections including cleaning for refixing removal to stend
S&F 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceilings or laid in floors all as specified and directed
S&F 20 mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceilings or laid in floors all as specified and directed
M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise desuised over 10cm woidth or girth apply two coat of systhetic enamel paint over a coat of pink primer complete all as specified and directed
M & L for old painted surfaces of any description not otherwise described over 10 cm width and girth and applying one coat of synthetic enamel paint complate all as specified and directed.
M&L for 18/19mm thick black boards grades 2 quality interior grades, commercial type, fixed with screws to timber frame work
S&F of sheet glass 4mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane
S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling and waste pipe complete all as specified and directed.
S&F in Brass chromium plated 32mm bore bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.
S&F in repair pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in 15mm dia Brass Chromium Plated mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete all as specified and directed including provn of cement concrete bedding and connection to trap, outgoing flushing pipe etc complete all as specified and directed.
S&F in repair fancy type Chromium plated brass angle valve for 15mm bore pipe, fixed in repairs complete all as specified and directed.
S&F in repair, two way angle valve chromium plated, brass 15mm bore complete all as specified and directed.
S&F in repairs plastic seat cover white of pattern W.C including fixing device and Chromium plated nuts, complete all as specified and directed. Make Cera/Hindware
S&F in repair china wash down water closet pan (padestal pattern) white trap including plastic water closet seat cover white/coloured with flat bottom and mild steel chromium plated or aluminised hinging device, connection to drain (or outgoing pipe) pipe and flushing pipe , anti syponage pipe, etc complete including making good to the floor complete all as specified and directed.
S&F in flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, complete all as specified and directed.
S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repair CP brass toilet paper holder, superior quality complete all as specified and directed.
S&F CP brass, soap dish, superior quality complete all as specified and directed.
S&F Health foucet including PVC pipe 1.20m long with brass nuts for EWC, fixed in repairs complete all as specified and directed.
S&F in repair PVC connection 15mm dia and 450mm long with 2 Nos PTMT nuts, complete all as specified.
S&F Grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified.
S&F in repair PVC waste pipe 60 cm long for WHB / sink with cup, complete all as specified.
S&F PVC mirror cabinet, coloured of size 300 x 450 mm fixed with screw and PVC gutty on wall complete all as specified and directed. Make:Prayag or equivallent as approved.
S&F in repair CP bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.
S&F in repair Vitreous china valveless, syphonic action type, low level flushing cistern of 10 lit capacity, white including siphon float valve, rubber cone and flush pipe, Brackets, handle etc complete all as specified and directed.
S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S & F Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S & F in repair Stop valves, cast copper alloy,fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, screwed both ends for iron pipe or for unions complete all as specified and directed.
Dismantling water tanks capacity exc 500 ltr & n ecx 1000 ltr and removing to store
S&F rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repairs Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) as fixed in repair
Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete.
S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls / laid in trenches, 110mm bore complete.
S & F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls / laid in trenches, 75mm bore complete.
S & F PVC (SWR) bends any radius, 110 mm bore complete.
S & F PVC (SWR) bends any radius, 75 mm bore complete.
S & F PVC (SWR) branch piece, single (single Y) equal or unequal, 110 mm bore complete.
S & F PVC (SWR) branch piece, single (single Y) equal or unequal, 75 mm bore complete.
S&F for wall mixer with connecting legs and wall flanges with provision for overhead shower with 115 mm 15mm dia chromium plated brass and securing to walls complete.
Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete.Make : Rajshree or equivalent all as specified and approved by Accepting Officer. Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only Note: Kitchen accessories ie baskets, cutlery baskets, fittings and fixture will be measured and paid separately as supply only
Supply only stainless steel acessories suitable for kitchen cabinets as under:-
(a) Stainless steel basket (plain) of size 50cmx37cmx10cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/15204 or equivalent approved
(b) Stainless steel thali basket (11-13 division) of size 50cmx37cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/TB/15208 or equivalent approved
(c) Stainless steel Plate basket (11-13 division) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/PTH/15206 or equivalent approved
(d) Stainless steel Partition basket of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/PRT/17206 or equivalent approved
(e) Stainless steel Cutlary basket of size 50cmx37cmx10cm made of 4mm th S.S.wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approvedMake: Life style Cat part No WA/CUT/15204 or equivalent approved
(f) Stainless steel basket (plain) of size 50cmx37cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved Make: Life style Cat part No WA/POB/15206 or equivalent approved
(g) Stainless steel bottol full out of size 50cmx40cmx16cm in two tier made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No FF/BPO/62018 or equivalent approved
(h) Stainless steel basket (plain) of size 50cmx52cmx16cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/21206 or equivalent approved
(i) Stainless steel grid basket (plain) of size 50cmx52cmx20cm made of 4mm th S.S.wire approved quality with suitable arrangement for fixing Telescope basket (channel) 18'/20' length two way extruded MS galvanised over rollers of approved make Make: Life style Cat part No WA/POB/21208 or equivalent approved
(j) Telescope basket (channel) 18/20inch length extruded MS galvanised over rollers of approved make
(k) Magnetic catches with steel body ‘H’ type, fixed to shutter complete.
(l) 75 mm dia brass handle fancy type polished bright finish complete.
(m) 100 mm dia brass handle fancy type polished bright finish complete
(n) Continuous (Piano) hinges, mild steel , bright finish, 30 mm width of flaps (when open).
S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.
S&F 2nd class hardwood factory made, 30 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass, gauze etc (with sash bars) , divided into squares, with plain, chamfered or rounded, mitred and rebated sash bar any numbers for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.
S & F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.
S & F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side completed all aspecifed and directed.
S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S & F 100 mm long aluminium butt hinges of extruded aluminium alloy with galvanised mild steel hinge pin anodized type C 21 complete all as specified and directed.
S&F 125mm long extruded aluminium alloy handle fabricated type anodized. complete
S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915 mm X 460 mm with bowl size 410 mm x 330mm x 160 mm complete all as specified and directed. Make: Nirali/ Blue Star/ Jayna/ Nilkanth.
S&F in repair Stainless steel plate rack(Utensil Rack) of size (600mm x 750mmx250mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed. Make: Nirali/ Blue Star/ Jayna/ Nilkanth.
S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed
S&F in repair 75mm dia PVC (SWR) floor/Nahani trap with gratings including jointing to waste pipe, fixed in plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) and jointed in run lead complete all as specified and directed.
S&F in repairs door stopper aluminium anodized white 40mmx40mm and 2mm thick dia 150mm having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.
S&F in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F in repair 125mm size extruded aluminum alloy handle, fabricated type, anodised, fixed with screws complete all as specified and directed.
S&F in repair 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F in repair 25mm dia aluminium powder coated, curtain rails/ drapery rod including end brackets and end knobs, stops, rollers complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in plinth protection finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at the length n exe 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed .
M&L for factory made coloured chequered cement concrete tiles 300cm x 300cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
Surface dressingn.exc 15m deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated soil exceeding 250 m but n exc 500m distance and depositing where directed at a level n exc 1.5 metre above the starting point . complete all as specified and directed.
Spreading and levelling of soil in layers n exc. 25 cm thick with well ramming including watering as required for filling under floor complete all as specified.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintal band at any height complete all as specified and as directed
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed.
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in chajjas, shelves etc and the like, complete all as specified and directed.
Use and wate form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed
Use and wate form work to chullah hood, chajjas, troughs and similar items including edges complete all as specified and directed.
Use and wate form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed
M&L for 5 mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed
M&L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified.
M & L for hardcore of gauge n exc 63 mm of broken stone depposited, spread and levelled in layers n exc 15 cm thick watered and remmed to a true surface complete all as specified and directed.
Dismantaling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.
M & L for 10 mm thick plaster in CM 1:3, Mixed with water proofing compound when concrete is green finished even and smooth withoud using extra cement complete all as specified and directed. (Note: Liquid water proofing compound to be measured snd paid separately.
Supply only liquid water proofing compound (ISI marked) complete all as specified and directed.
M&L for water proofing treatment to roof and edges (Vertical or tapered etc) in following sequence:-(a) Properly cleaning and drying the surface. (b) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c Laying of 3mm thick APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap,sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative).
M & L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.
Refixing of item obtanied from Item no 154, using old 40mm thick brick tiles laid over and including 20mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.
M & L for first or premium quality non skid joint free coloured ceramic floor tiles 7 to 8mm thick (square/rectanular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified.
M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.
S&F first or premium quality Factory made solid PVC door frame of size 50 mm x 95 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.
S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face supplying and fixing in frame at site complete all as specified and directed.
S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.
S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S & F WC square pan "Orissa pattern" of size 580 X 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified and directed in SSR and including 'P' or 'S' trap coplete all as specified and directed.
S & F vitreous chine white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water colset white seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated of aluminium hinging device complete all as specified and directed.
S & F flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plate nuts complete all as specified and directed.
S & F for PVC flushing cistern 10 ltrs capacity valve less syphoing action type low level with and inluding ball valve float & handle, waste pipe & brackets complete all as specified and directed.
S & F vitreous chine urinal, Halt stall type white (excluding flushing cistern, flush pipe and waste pipe) including 32 mm dia CP coupling, CP urinal sprader with CP pipe up to angel cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed.
S & F vitreous china waste and basin white flat bak, size 550mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand by exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed.
S & F 15 mm bore CP pilar tap (fancy type) cast copper alloy with capstan heades chromium plated, screwed down high pressure with long shanks and fly nuts screwed for iron pipe complete all as specified and directed
M & L for 18 to 20 mm thick Granite work (table rubbed and polished) as in vertical surface on wall, columns or similar works in 12 mm thick cement mortar (1:3) backing plaster including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S & F for 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S & F 15 mm bore CP bib tap (fancy type) with crutch or butterfly handle, screwed down screwed for iron pipes or brass ferrule complete all as specified and directed please.
S & F 15 mm bore CP angle stop valve (fancy type) of screwed down for high pressure with cruthch or butter fly handl, screwed both end for iron pipes complete all as specified and directed please.
S & F 15 mm bore CP fancy stop valve (Concealed type) with long shanks and cup fixed with pipes complete all as specified and directed.
S & F 125 mm size fancy type chromium plated shower rose with swivel joints and connecting rod including fixing to steel pipe or union complete all as specified and directed please.
S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified.
S & F Salt glazed stoneware drain pipe grade 'A' 150 mm bore laid in tranches and jointed complete all specified and as directed.
Materail and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in beddrain pipes of 150 mm bore including packingunder and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
M & L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 25 mm thick stone cushion and joints filling with sand complete all as specified and directed.
Supply & fixing ISI marked switch piano flush button type, single pole, one way, 6 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing socket out let 6 pin, 6 Amps flush type for point wiring complete all as specified and directed .
Supply & fixing ceiling rose 3 pin/PVC/ polycarbonate, isolated body with colour ring for fan point wiring all as specified and directed .
Supply & fixing TPN MCB Distribution Box of 8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.
Supply & fixing DB with single phase & neutral MCB Distribution Box of 8 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed.
Supply & fixing MCB with MCB SP, 06 to 40 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.
Supply & fixing MCB with MCB SPN, 63 Amps 240 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.
Supply & fixing MCB with MCB TPN,100 Amps 440 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.
Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.
M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conceal conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all acessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :-
(a) One light/fan/bell point controlled by one switch
(b) One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane
(c) One point for socket outlet 5 amps on independent board but below the switch board in same vertical /horizontal plane
(d) One point for socket outlet 5 amp same board
(e) -do- as per above but One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.
S&F switch piano flush type 16 amps, 230V AC single pole one way complete all as specified & directed.
S&F socket out let 2-in-1, 3 pin, 5 & 15 amp flush type complete all as specified & directed.
S&F fan regulator, 5 stepped, electronic type, single phase, 80 watt, socket size incl connection complete complete all as specified & directed.
Taking down main switches fuse unit, MCB/Kit kat distribution board with steel enclosure along with MCB’s /Kit kat fuse of any amps/ways including wooden board or from steel board and making good disturbed surfaces complete all as specified & directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole & Neutral, 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole & neutral 40/63 amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.
M&L for two single core (submain) FRLS PVC insulated cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM
(a) 2x4.0 sq. mm + 1x2.5 sq. mm earth wire
(b ) 2x6.0 sq. mm + 1x4.0 sq. mm earth wire
Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed
Supply & fixing surface /wall mounted light fitting in CRCA powder coated white housing with pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Cat Part No for batten:- REGALBATTENT8UPTO1X18WDSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved Cat Part No for Tubelight:- PHOTANULTRA2.01213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor.
M&L for cutting & chasing required exceeding 20 CM girth for concealed conduit wiring and for GI earth wire including making good to disturbed surface with cement mortar 1:3 and distemper / colour wash to match with existing surfaces including facing / finishing where as required complete in all respect as specified and directed.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
S&F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.
S&F sheet metal enclosure for MCB's 240 volt 4 way single pole and neutral with 200 amps rated busbar double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F LED light fitting 10 Watt bulkhead luminaires in high pressure die cast aluminium housing, lumen out put - 700 Lm, colour Temp - 6500 K having Ingress protection - IP 65 fpr dust, water & IK 08 for external impact including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Cat Part No - WT140 LED7S NW PSU S1 PC; Vistaglow of make - Philips 'or' LBHP-10-CDL of make Crompton 'or' LW07-11-XXX-57-XX of make Wipro or its equivalent as approved
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades, MS frame and louvers as specified and directed by Engr-in-Charge.
Supply & fixing ISI marked modular , one way, 10 Amps, 240 volts for point wiring complete all as specified and directed .
Supply & fixing socket modular 10Amps for point wiring complete all as specified and directed . .
Supply & Fixing switch socket combination multipurpose 2 in 1, 6 pin, 6 and 16 Amp, modular type universal for power point wiring complete all as specified and directed .
Supply & fixing modular fan regulator 10amps complete all as specified and directed .
Supply & fixing modular bell AC 10A 10amps complete all as specified and directed . .
Supply and fixing modular white cover plate with frame but 4 module complete all as specified and directed.
Supply and fixing modular white cover plate with frame but 4 module complete all as specified and directed.
Supply and fixing modular metal flush box but 4 module complete all as specified and directed.
Supply and fixing modular metal flush box but 6 module complete all as specified and directed.
Supply, fixing, connecting & testing T8 TLED LED tube light of 18 Watt having IP 65 protection with complete all as specified and directed. Make: TCW450 P 2XTLED 19W P3397 of Philips/Havells/CG or as approved.
Supply, fixing, connecting & testing LED tube light fittings of 10 Watt having IP 65 protection with complete all as specified and directed. Make: Philips/Havells/CG or as approved
Supply & fixing ceiling fans with blades, down rods, electronic regulator and accessories 230 volts single phase 1400mm sweep with min air delivery 245CFM and service valve 6.0 suitable for wall mounting complete all as specified and directed.
Supply & fixing MCB with MCB TPN,100 Amps 440 volts AC , 'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed.
Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.
M&L for cement concrete tiles of size 20cm X 20cm X 20-22 mm thick ( factory made machine pressed) (As per IS-1237: 1980) laid over and including 15 mm thick screed bed in CM 1:6 mixed with polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with polymer based cement proof joint filler (manufactured by approved company) on assesible roof area complete all as specified and directed.
Disconnecting existing water tanks, 500 to 1000 ltrs setting aside (or lowering if required) and hoisting, reconnecting and re-fixing in same position after cleaning complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) double layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
S & F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
S & F in repairs110 mm PVC (SWR) bends any radius
HARSH ASSOCIETES
MS BHAVANA ENTERPRISES
Vibha Enterprises
DK Builders
Technological Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .