Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.8 LAccepted-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L1 | Accepted-AOC L1 | |
| 2 | L2₹25.8 L+₹2,644.50 (0.10%)Rejected-Finance CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹27.8 L+₹2.0 L (7.59%)Rejected-Finance NOT FOUND | L3 | Rejected-Finance Other than L1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
1 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA, HARYANA-125055
COMPREHENSIVE MAINTENANCE TO MD ACCN OF POCKET-05 (OFFICERS QTRS) AT AF STN SIRSA
2024_MES_658817_1
GE/SRA/T-35/2024-25
Open Tender
Miscellaneous Works
Item Rate
240 days
GE (AF) SIRSA
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) SIRSA
₹50,000
Yes
19 Sept 2024
10 Jun 2024
2 Jul 2024
10 Jun 2024
1 Jul 2024
19 Jun 2024
Amount
M&L preparing old Distempered surfaces of Walls including filling the existing Nails/Screw Holes, etc. and applying One Coat of Acrylic Distemper (as approved) with rollers complete all as specified and directed.
M&L for Complete Removal of existing Treatment on walls and applying 1.50mm thick Wall Putty, Rubbing down with Sand Paper to obtain a Smooth Finish Surface including filling the existing Nails/ Screw Holes, etc. and applying Two Coats of Acrylic Distemper (as approved) with rollers, complete all as specified and directed.
M&L preparing old decorated/painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (1st quality), complete all as specified and directed.
M&L preparing old Treated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and directed.
M&L for preparing old treated/decorated surfaces of ceilings and applying One Coat of White Wash, complete all as specified and directed.
M&L for preparing old treated/decorated surfaces of Walls and applying One Coat of White Wash, complete all as specified and directed.
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and directed.
M&L for Rendering (Internal) 12mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed.
M&L for Rendering (Internal) 15mm thick in cement mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement complete all as specified and directed.
M&L for Rendering 5.0mm thick in cement mortar 1:3 on Concrete Surfaces of Ceilings, Plastered Surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, complete all as specified and directed.
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
Supply only Liquid Water Proofing Compound, ISI Marked, as approved, complete all as specified and directed.
M&L preparing new Plastered surfaces of Walls by applying 1.5mm Wall Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of Acrylic Distemper (as approved) over a Coat of suitable Primer with rollers, complete all as specified and directed.
M&L for preparing newly Plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and directed.
M&L for preparation of newly plastered surfaces and applying exterior wall putty 1.5 mm thick for smooth surface and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, upto 4 storey height complete all as specified and directed.
M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint over a coat of suitable exterior Primer (as per Manufacturer's instructions), complete all as specified and directed.
M&L preparing old Decorated/Treated Plastered surfaces of Exterior Walls upto Four Storey by brooming down or steel wire brushing and scraping down, filling of cracks with suitable paste and applying with rollers One Coat of Exterior Emulsion Paint (having anti-dust & anti-algae properties) with approved Tint (as per Manufacturer's instructions), complete all as specified and directed.
M&L for complete removal of existing treatment and applying exterior wall putty 1.5 mm thick for smooth surface and finished with two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) over a coat of suitable exterior primer, applied with rollers to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's instructions, upto 4 storey height complete all as specified and directed.
S&F in repair Non-asbestos Fiber Cement Building Boards 4.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, and fixed-in-repairs, and applying Two Coats of acrylic distemper (as approved) over a Coat of 1.5 mm thick wall care putty for priming the surface complete all as specified and directed.
Demolition Brick work built in cement mortar and in any Position including all Quoins, Arches and Pillars, etc. and removal of debris from site complete all as specified and directed.
M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and directed.
M&L Brick work using Serviceable Bricks obtained from Item No. 23 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and directed.
Demolition Cement Concrete (Reinforced) of slab, facia, chajjas, sunshade, chullah hoods and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed.
M&L Reinforced Cement Concrete 1:2:4 type B0 (12.5mm graded stone aggregate) as in Slab supported on walls complete all as specified and directed. (NOTE: MS reinforcement & Formwork shall be measured and paid seperately)
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for rough finished surfaces complete all as specified and directed.
M&L TMT Bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and directed.
M&L TMT Bars 06-08mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia or securing with Clips, complete all as specified and directed.
Taking down damaged/unserviceable PVC Chowkat or Frame not exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed.
S&F Solid PVC Door Frame of size 50x47 mm made out of 5.0mm having Wood Grain Printed PVC Sheet reinforced with Mild Steel Square Tube and fixing in opening, complete all as specified and directed.
M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.
S&F Aluminium Barrel Tower Bolt 150mm long (weight not less than 130 Gram), extruded section, complete all as specified and directed.
S&F Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), extruded section, complete all as specified and directed.
S&F in repairs Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), extruded section, complete all as specified and directed.
S&F Butt hinges, 75 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type C-21 and fixed, complete all as specified and directed.
S&F Butt hinges, 100 mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised , type B-21 and fixed, complete all as specified and directed.
S&F Aluminium alloy Handle 150mm long (weight not less than 100 Gram), cast type, anodised, complete all as specified and directed.
S&F in repairs Aluminium alloy Handle 150mm long (weight not less than 100 Gram), cast type, anodised, complete all as specified and directed.
S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed.
S&F in repairs Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and directed.
Resecuring or easing & adjusting without taking down shutters of any description, area exceeding 1.0 sqm but not exceeding 2.0 sqm each complete all as specified and directed.
Taking down Shutter of any description, area exc 1.00 Sqm and not exc. 2.00 Sqm Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and directed.
Taking down damaged/unserviceable Steel/Wooden Chowkat or Frame exc. 1.50 Sqm but not exc. 4.00 Sqm Each with shutter( without taking off shutter from the frame) and removal from site complete all as specified and directed.
Taking down Shutters of any description exc 1.0 sqm and not exc 2.0 Sqm each and removal from site complete all as specified and directed.
S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates incl necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and directed.
S&F Pressed Steel Frame of size 125x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates incl necessary Fixing Lugs, Hinges, Lock Strike Plate, etc., complete all as specified and directed.
M&L for Flush Shutters of 30mm thick, solid core construction with block board core and plywood face panels, cmmercial type on both sides and fitted to Steel Frame, complete all as specified and directed.
M&L Panelled Shutter 35mm thick of Second Class Hardwood with Panels of 12mm thick Veneered Particle Board medium density wood with commercial face veneered both side and fitted to Chowkats, having size of Rail and Stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beeds supplied and fitted to Chowkat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and directed.
S&F Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and directed.
S&F in repair Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and directed.
M&L Cement Concrete 1:3:6 type C0 (12.5mm graded stone aggregate) as in Filling Back side of Chowkats, complete all as specified and directed.
S&F in repairs Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutters, having Outer Frame of Section 50x25mm and Inner Frame of Section 40x20mm, jointed internally with Mild Steel Flat Iron 40x3mm complete with Stainless Steel Tower Bolts, Hinges, Handles, Stops, Lugs, etc. including Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm, guard bars etc., complete all as specified and directed. NOTE :- (a) For the purpose of Measurement and Payment Double Shutters with Frame shall be considered as ONE UNIT. (b) Unit Rate quoted shall deem to be include all the Stainless Steel Builders & Hardware as required/directed at Site. (c) Quoted Unit Rate shall also deem to be include Mild Steel Guard Bars of 10mm Square Bar, spacing at 10 Cm centre to centre on both Vertical & Horizontal directions. (d) Sheet Glass shall be Measured and Paid for separately under appropriate Item.
M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and directed.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and directed.
Taking down damaged/unserviceable Aluminium window, ventilator etc, not exc. 1.50 Sqm Each with shutter (without taking off shutter from the frame) and removal from site complete all as specified and directed.
M&L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 No.) hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) complete all as specified and directed.
S&F aluminium anodised decorative grills of size 75mm x 75mm having section width 6mm and 3mm thickness for aluminium windows incl all necessary jointing cleats, fixing clips, side channels, making holes for operation of handles etc complete all as specified and directed.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frames, glazed with putty or fixed with beads, complete all as specified and directed.
S&F Plain Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and directed.
S&F Frosted Sheet Glass 4.0mm thick, Ordinary Type and glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and directed.
S&F Sheet Glass 5.0mm thick, Tinted (as approved by GE) fixing to Aluminium Window including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and directed. NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate.
S&F Sheet Glass 4.0mm thick, Frosted (as approved by GE) fixing to Aluminium ventilator including replacement of Rubber Packing and refixing Aluminium Beading, complete all as specified and directed. NOTE : Cost of Rubber Packing shall deem to be include in the Quoted Unit Rate.
M&L for Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc. and fixed complete all as specified and directed.
S&F in repair Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc. and fixed-in-repairs, complete all as specified and directed.
S&F in repair Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket(shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and directed.
S&F in repair Door Spring of Mild Steel 150mm long, Ordinary Rat Tail type, Rod patteren Springs including Roller and Roller Plate welding with frame , etc., complete all as specified and directed.
S&F in repair Mild Steel Mortice Lock 100mm in size, 4-Lever, Vertical type, complete all as specified and directed.
S&F in repair 18-19 mm thick PVC Board Scratch and strain free (weight not less 9 Kg/Sqm) in Kitchen Cabinets (shelves, doors etc), one side laminated , jointed by means of PVC Adhesive Solvent and fixed using Self-tapping Aluminium Screws, including providing & fixing of Stainless steel L shaped hinges suitable for PVC Board (minimum of 02 Nos for Each leaf ) to hold cabinet door, Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), complete all as specified and directed. NOTE: Quoted unit Rates are inclusive of PVC board, handles, hinges, screws etc.
S&F in repair stainless steel Cup and Saucer basket of size (370x485x100mm) and fitted to a telescopic drawer channel and PVC celuka Ply board with smooth movement complete all as specified and directed. Make : Godrej (Product Code : 6129) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repair stainless steel Perforated Cutlery basket of size (370x485x100mm) and fitted to a telescopic drawer channel and PVC celuka Ply board with smooth movement, complete all as specified and directed. Make : Godrej (Product Code : 6132) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
S&F in repair 500 mm telescopic drawer channel fitted to celuka Ply Board and stainless steel basket for smooth movement, complete all as specified and directed. Make: Godrej (Product Code : 5919) or equivalent in HETTICH/OZONE/EBCO/HAFFLE
M&L for Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Granite (of any type) Tiles, 18-20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including edge moulding, grinding and polishing, laid over and including 20mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for Granite (of any type) Tiles, 18-20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Non-skid/matt finish Ceramic tiles, coloured, joint free, 7 to 8 mm thick (Square/rectangular), area of each tile exceedig 0.11 Sqm but not exceeding 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for dismantling floor tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Non-skid/matt finish Ceramic tiles, coloured, joint free, 7 to 8 mm thick (Square/rectangular), area of each tile exceedig 0.18 Sqm but not exceeding 0.38 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the tiles, laid over and including Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
-ditto- but for non-skid/matt finish ceramic tiles in skirting, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
M&L for taking down wall tiles alongwith screed bed, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water and providing Coloured/Printed Glazed Ceramic Tiles, 450x300x6.5-7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, fixed over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:3, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
S&F in repair Chromium plated brass Pillar tap, fancy type. with aerator, fixed to wash hand basin, complete all as specified and directed.
S&F in repair 15mm bore chromium plated single lever central hole basin mixer without popup waste system with 450mm long copper pipe and brass nut, complete all as specified and directed.
S&F in repair 15mm bore chromium plated sink cock, swivel casted spout (wall mounted model) complete all as specified and directed by Engineer-in-charge
S&F in repair Chromium plated brass Bib cock with wall flange , fancy type, short body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Bib cock with wall flange , fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed.
S&F in repair 15mm bore chromium plated two way bib cock with flange , fancy type complete all as specified and directed.
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass two way Angular stop cock , fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed.
S&F in repair chromium plated brass over head shower rose (100 mm dia) with arm , with 3 flow, fixed to 15mm bore of iron pipe complete all as specified and directed.
S&F in repair chromium plated brass over head rain shower rose, square (minimum 150 mm size), duly fixed from ceilings, single flow, fixed to 15mm bore of iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Wall mixer , concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe complete all as specified and directed.
S&F in repair Chromium plated brass Wall mixer , concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe complete all as specified and directed. NOTE: Telephone shower shall be measured and paid seperately.
S&F in repair fancy type chromium plated telephonic hand shower (ABS Body), multiflow type with flexible tube and hook screwed for iron pipe including frame complete all as specified and directed.
S&F in repair Jet Spray with Connection Pipe 15mm bore (dia), Brass Chromium Plated and suitable for Wash Down Water Closet Pan (Pedestal Pattern) , complete all as specified and directed.
S&F in repair chromium plated Hand shower (health faucet), ABS body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.
S&F in repair Vitreous China White Squatting Pan of size 580x440mm, 'Orissa' Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK / ESSSCO, Cat No: ECS-WHT-551SSPP)
S&F in repair vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model: CHAMP / PARRYWARE, Model: Entice / HINDWARE, Model: FLORA / ASIAN PAINTS, Model: IMMERSE / ESSCO, Cat No: AIS-WHT-101851S220SPPSM )
S&F in repair vitreous china, wall mounted closet, white incl bracket, trap, PVC soft close seat cover and connecting fittings complete all as specified and directed. (Make : CERA, Model : COMPACT / PARRYWARE, Model: CASCADE NXT / HINDWARE, Model: STUDIO)
S&F in repairs 100mm bore cast iron sanitary connection socket to fit WC outlet complete all as specified and directed.
S&F in repair Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Device and complete all as specified and directed. NOTE: This item shall be measured for replacement of only seat cover on existing EWC.
S&F in repair Plastic seat & cover, white, soft close type, for water closet (of any description) incl chromium plated hinge complete all as specified and directed. NOTE: This item shall be measured for replacement of only seat cover on existing EWC.
S&F in repair flush valve concealed push type (dual flush) 40 mm bore including concealed body and all other fittings complete all as specified and directed. (Make: CERA, Cat No: F8010202 / HINDWARE, cat No: F860042 / PARRYWARE, Cat No: T3305A1 / PRAYAG, Cat No: BEA-37 / JAQUAR, Cat No: FLV-1089N)
S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and incl with flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART /ESSCO, Cat No: WHE-WHT-183NL)
S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adapter Nuts of PVC, complete all as specified and directed.
S&F in repair Vitreous China Wash Hand Basin 460x330mm in size, White (Flat Back or Angle Back Type), provided with 32mm dia Brass Chromium Plated Waste Fitting, PVC waste pipe, brackets incl making good disturbed Surfaces in Cement Mortar 1:3 and filling joints with whte cement complete all as specified and directed. (NOTE: Cost of CP wate coupling and PVC waste pipe is deemed to be included in the quoted rates)
S&F in repairs toilet paper holder, chromium plated, surface type with flap complete all as specified and directed.
S&F in repair Glass Shelf (Bath Tray), 600 mm long alongwith all accessories complete all as specified and directed.
S&F in repair Corner Glass Shelf single Decker (Triangular shape) of size 30 Cm, complete all as specified and directed.
S&F in repairs, Tubular towel rail , 20mm dia, 600 mm long between flanges including brass chromium plated, complete all as specified and directed.
S&F in repairs towel rack without lower hangar with hook complete all as specified and directed.
S&F in repair Chromium plated brass Towel ring, round or square, complete all as specified and directed.
S&F in repair stainless steel peg set of four of best quality complete all as specified and directed.
S&F in repair soap dish, square, acrylic body with chromium plated base complete all as specified and directed.
S&F in repair soap dispenser with glass bottle with chromium plated base complete all as specified and directed.
S&F in repair Rotational Moulded Polyethene Water Storage Tank, 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and directed.
S&F in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and directed.
M&L Cleaning and removing all Scales and dirts from the Tank and mouths of circulating Pipes, etc. after draining out Water from the Tank of capacity 500 Litre but not exc. 1000 Litre, cleaning the Tank by scrubbing the deposits with Wire Brush, re-fixing Inlet and Outlet Pipes in the Same Position and writing Letters "CLEANED ON DD.MM.YYYY" (i.e. Date of Cleaning of Tank) not exc. 50mm in height, complete all as specified and directed.
S&F in repair PVC (SWR) 75 mm floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repair PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, laid on floor, complete all as specified and directed.
S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floors, complete all as specified and directed.
S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC clips, complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed.
S&F in repair PVC (SWR) 75mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed.
S&F in repair PVC (SWR) 110mm bore (dia), Bend any type, provided with Access Door, etc. and jointing with Solvent Cement, complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, with access door complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) junction single (single T) equal or unequal, with access door complete all as specified and directed.
S&F in repair PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.
Taking up or down Steel Tubing 15mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed.
Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and directed.
S&F Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR 11, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings (such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector etc) fixed / laying walls, ceilings or in floors etc. with suitable size MS clamp of spacing 1.00 mtr etc pipe line complete all as specified and directed.
-ditto- but with 25 mm outer dia size CPVC pipes
S&F CPVC Ball valve 20mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed.
S&F CPVC Ball valve 25mm (outer dia), screwed both Ends for CPVC pipes, complete all as specified and directed.
S&F in repair acrylic bathroom cabinet box with mirror of size 622 mm X 422 mm size complete all as specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF / JEXON / SHAKTI / NILKAMAL )
S&F in repair Grating 100mm dia in size, Chromium Plated (as approved), complete all as specified and directed.
S&F in repair Stainless Steel Plate Rack, minimum size 75x75x25 Cm, made out of Stainless Steel 0.85mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws , complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick in kitchen with plug washers, waste coupling, PVC waste pipe and fixing cantilever brackets connecting union to pipe, overall size of sink 914 mm x 460 mm and bowl size 405 mm x 354 mm x 203 mm complete complete all as specified and directed. (MAKE : CERA, Cat No: B4512201 /PRAYAG, Cat No. 1339D / PARRYWARE, Cat No: C855099 or equivalent model in NIRALI / ANJALI / JAYNA) (NOTE: Cost of CP waste coupling and PVC waste pipe is deemed to be included in the quoted rates)
S&F in repairs for waste coupling chromium plated for sink /wash basin, suitable for 32mm dia waste pipe complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)
S&F in repair PVC Waste Pipe 32mm bore (dia), 60-75 cm length (as required at Site), complete all as specified and directed. (NOTE: This item shall only be measured for replacement in existing sinks, basins etc)
M&L for built in steel cup board with pressed steel frame of size 75x45x1.25 mm thick with pressed steel shutter 1.00 mm thick (Godrej Pattern) fixed to masonry wall by hold fast made out of 25x3 mm thick flat iron incl MS hanging rod of 10mm dia with bracket fixed on inner side of cup board shutter and on other leaf provision of MS peg set of 03 including spray painting with two coats of synthetic enamel paint over one coat of red oxide primer all around steel surfaces of frame and shutter including taking down old existing wooden cup board and making good disturbed portion of walls in CM(1:4) or PCC 1:2:4, surfaces finished with 1.5 thick wall putty and two coats of acrylic distemper complete all as specified and directed. Note: For measurement purpose, only exposed portion from front to be considered.
Demolition Cement Concrete (un-reinforced) of any description and in any position and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.
M&L Cement Concrete 1:5:10, type E-2 (40mm graded stone aggregate) as in mass concrete, sunken floor filling,etc. complete all as specified and directed.
M&L applying Flexible Water Proofing & Protective coating on Floor and Walls of Sunken portion as per IS- 2645 and application as per manufacturers instructions comprising with the following, complete all directed by Engr-in-Charge/GE :- (a) Cleaning of surfaces properly to remove all moss, algae, loose particles, oil, laitance, dust etc. All cracks shall be cut in 'V' grooves and shall be filled with latex solution. (Make:- Asian Paint latex/Sika latex SBR 100 putty/ Dr fixit 302 SBR latex/ FOSROC Nitobond SBR Latex) (b) The joints of sunken slab & walls shall be filled with suitable epoxy sealent . (c) Providing 15 mm thick PCC 1:1½:3 type A0 (12.5 mm graded stone aggregates) in floors & fillets at corners. Top surface of the PCC shall be finished with cross slope directed towards the spout. (d) GI pipe of 40 mm medium grade to be inserted at the lateral slope projection at least 25 cm beyond the outer most projected part of the building below the drain pipe. contd.....
Item No 146 (contd....) (e) Watering the concrete surface for proper curing and removing all excess water to leave just a damp surface. (f) Applying Two Coats of two component polymer modified cementitious waterproofing coating @ 1.50 KILOGRAM PER SQM Each Coat (or as recommended by manufacturer) on plastered/concrete surfaces. The Second Coat shall be applied in crosswise direction when the First Coat is completely dried and after a gap of minimum 01 hour. (MAKE: DR FIXIT, PIDIFIN 2K / SIKA, SikaTop®-107 Seal IN /FOSROC, Brush Bond or similar item in other approved makes) (f) A protection plaster 12 mm thick in CM 1:3 mixed with appropriate admixture shall be applied on vertical surfaces as per manufacturers instructions. (Make: SIKA, PLASTOCRETE/FOSROC, CONPLAST WL/DR FIXIT, PIDIPROOF LW+ or similar item in other approved makes) (G) Curing of waterproof coating for a minimum period of 24 hours using watering, wet hessian cloth etc directed by Engineer-in-Charge. NOTE:- Measurement for payment shall be considered for the flat horizontal surface area of the sunken portion of floors.
Demolition Cement Concrete (Reinforced) of Roof, Floor (other than Ground Floor) Beam, Staircase, Landings, Chajjas and similar work (reinforcement cut as required to facilitate demolition) and removing debris, etc. to Outside MOD Land, complete all as specified and directed.
M&L for Cutting holes into or through brick walls built in cement mortar or cement lime mortar and making good in 1:3 or cement concrete 1:2:4 type B1 as required for superficial area not exceeding 150Sqcm complete all as specified and directed by Engineer-in-charge
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
M&L for repairing of RCC projection, chajja, roof facia, column etc by necessary preparation i.e. scraping, cutting, chiselling and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces, then applying one coat of cement slurry and filling the surface with cement concrete 1:1.5:3 using 12.50mm graded stone aggregate, reinforced with welded mesh and Surfaces to be finished even and smooth without using extra cement incl applying a Coat of Chalk Whiting (as Preparatory Treatment) and applying Two Coats of Exterior Emulsion Paint over a coat of cement primer with approved Tint as per manufacturer's instructions compete all as specified and directed. NOTE:- (i) Site for application is at various locations in patches and height varies up to 12M. (ii) Proper stable Scaffolding is must for working for the safety of resident of bldg and worker. Cost of all types of formwork, scaffolding & safety gear and welded mesh shall deemed to be included in quoted rate.
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.
M&L Cement Concrete 1:3:6 type C1 (20mm graded stone aggregate) 75mm thick as in Plinth Protection, finishing Cement Concrete surface Even and Smooth without using Extra Cement, including making joints 12mm wide upto total depth of concrete at every 3.00 metre interval and every change of direction, complete all as specified and directed.
M&L Cement Concrete 1:4:8 type D2 (40mm graded stone aggregate), 75mm thick, as in sub base of floor, path, hardstanding etc complete all as specified and directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles in Floor, complete all as specified and directed.
M&L for providing Chequered coloured cement concrete tiles 300x300x22-25mm thick, set, jointed and pointed in neat cement slurry in floors, with grey cement and pigment, laid over and including 20 mm thick Screed Bed in cement mortar 1:4, complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deemed to be include in the Quoted Unit Rate.
M&L for providing outdoor ceramic Floor (Paver) Tiles, 300 x 300 x 9.0 to 10mm thick, highly abrasive, Anti-skid, Impact Resistant, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete including providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (NOTE : Cost of Cement Screed Bed shall deem to be included in the Quoted Unit Rate.
Repairing of Aluminium Door, Windows, Ventilators Shutter Fixed/ Side Hung /Sliding Type including taking down, if necessary, refixing with minor adjustments for opening and closing properly with replacement of necessary Jointing Cleats, Glazing Clips, Rubber Neoprene Packing, Aluminium Snap Beading, Screws, etc. and repairing of Locking Arrangement if any, complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to include for jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc as required/ordered at site)
Removing vegetation growth/shrubs (girth up to 30 CM), cutting in brick wall/concrete surface upto triple storey building carefully without damaging the existing soil, vent, water supply pipe and removing roots of plants completely and filling the gaps with PCC 1:2:4, Type B-0 finished with existing surface including all scaffolding ladder etc as required surface are n.exc. 0.36 Sqm each complete all as specified and directed.
M&L for Mild steel framed works such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.
M/s Satguru Traders
shiv shanker enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .