Repair/Replacement of saucer drain, storm water and compound wall in the area of HQ TGEME, 629 TPT Coy, AFTC, AFMSD in the area of AGE B/R-III under GE (West) Delhi Cantt-10.

Amount

Dismantling of chain link fencing wire mesh of any description complete all as specified and directed.

Dismantling post or struts (wood,steel or RCC) any section,including taking out embeded in concrete,brick work etc. complete all as specified and directed.

Excavation in post holes n.exc 0.5 cum each getting out,returning filling in and ramming earth in layers n.exc 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed.

S&F in MS work such as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

S&F 12mm dia MS round bars Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in fencing, cut to length fixing with posts/fencing, binding securing with clips etc all as specified and directed

Supply only chain link MS galvanised fencing, of mesh 50mmx 50mm and thickness of line wire 3.8 mm dia including fixing with straining bolt, binding wire etc. complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F in repair Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc etc as directed (each line wire to be measured) incl taking down old wire etc complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of primer incl preparation of new steel surfaces of any description over 10cm girth or width complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square dia of neck 11 to 15 mm heads at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts exc 5cm but n.exc 10 cm and dia of shank 10mm all as specified and directed.

S&F of framed work as in doors or gates of angle or ther section with gusset plates, rails, grills, braces etc, complete drilled for fixed of Gde Fe-410 (Gde E-250) quality B etc complete all as specified and directed

S&F for framed work such as grills,grating etc.with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces not.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings thickness below or above ground level complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, 75 mm thick using 40 mm graded crushed stone aggregate as in sub-base complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made, Vibro compacted, coloured reflective glossy finish precast concrete interlocking paverblocks with grey cement and no pigment block,coloured, glossy finished, PVC moulded, any shape and size confirming to IS 15658-2006 incl dismantling of old tiles complete all as specified and directed.

M&L cement concrete chequred tiles size of 25cm x25cmx 22mm thick coloured reflective type glossy finish machine pressed ,vibro compacted, rubber moulded with grey cement and pigment, and pointed in neat cement slurry in floors 15mm thick screed bed in CM 1:4 etc incl 25 mm thick PCC 1:2:4 type B1(20mm graded aggregate) all as specified and directed

M&L for providing precast cement concrete, Type B1 1:2:4 (20 mm graded aggregate) factory made, Kerb Stone, having strength M-30, quoin blocks, string courses, copings, kneelers, apex stones, pier caps, pintle blocks, anchorage blocks, bonders (for stone walling), (of any section directed), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match complete all as specified and directed.

M&L for Providing precast cement concrete copings. kneelers, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling). corbels, brackets, etc with plain fair faces ,including chamfers, weatherings, throatng etc. and setting in mortar complete with joints to match complete all as specified and directed.

M&L for Providing precast cement concrete louvres and jallies type B 0 1:2:4set in cement mortar 1:4, 25mm thick (mea sured solid), including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032) complete all as specified and directed.

S&F in repair concertina coil fencing of 600 mm dia with following specifications:- (a) Concertina coil fencing of 600 mm dia shall be fixed to the angle iron posts in compound wall. The weight of 01 coil shall not be less than 8.60 Kg and shall be stretched not more than 06 Running meters in length. (b) The dia of wire of concertina coil shall not be less than 2.50 mm and shall be surrounded by 0.50 mm GI sheet and fixed with suitable J Clips all as specified. (c) The concertina coil shall be supported on 7 strings of concertina wire of same specification as in Para 55(b) above and binded properly to the concertina coils and angle iron brackets. (d) The running length of the fencing (along the wall : Length of wall = Length of concertina coil fencing) will be measured and paid (e) Fencing shall be measured and paid in unit RM consisting of above specifications.

M&L for plain cement concrete (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L Brick work with with sub class "B" bricks, strainght or curved on plan not exceeding 6m mean radius built in cement mortar 1:4 including demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings dressed stone work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) as in coping etcc complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms moulds, mitered/stopped ends etc complete all as specified and directed.

M&L for 300 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars including Concrete bed cement concrete type C-2 1:3:6 to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; including Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required

S&F in repairs factory made plain/perforated SFRC manhole/drain covers 80mm thick, M-30, medium duty of size n.exc 1.00 sqm each complete all as specified and directed.

M&L 110 mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints laaid in trenches or in floors complete all as specified and directed

Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc 50 m and clearing the site complete all as specified and directed.

M&L for 250x100x12 to15mm thick Glass Reinforced Concrete (GRC) wall cladding tiles (Castle Stone) in approved design,texture,pattern and colour with high vibration technology and concrete mix design compressive strength equivalent to M-40 grade@28 days. jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick CM (1:3) screed bed including taking down old wall tiles etc complete all as specified and directed.

Taking down cement plasterof any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L rendering 15mm thick ready mix mortar with water proofing compound 3% by weight of cement or liquid as per manufacturer's instructions complete all as specified and directed. (Note:- WPC rates shall be included in quoted rate.)

M&L rendering 15-20 mm thick in cement mortar 1:4 Rough cast plaster as specified on fair faces of brick or concrete surfaces finished fair and even complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement base paint including one coat of alkali resistant primer complete all as specified.

M&L precast cement concrete type B-1, 1:2:4 (20 mm graded aggregate) set in CM 1:4 as in manhole covers including demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L for applying Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per\square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as perapproved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings.complete all as specified (Payment for providing grooves shall be made separately). it also includes cutting & extirpating of small trees or plants in walls.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for cleaning of existing open drain of any width or any depth including removal of sludge/Mud/silt (liduid or dry) in any position out side of MOD land complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as insurface channel and drains including demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC in surface channels and drain type B-1 1:2:4 using 20 mm graded aggregate complete all as specified and directed.

Supply only integral water proofing compound. Make: dr. Fixit or equivalent

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complte all as specified and directed.

S&F false ceiling of grid of galvanized steel tee/ angle (power coated ) of grid size 600x600mm as directed comprising of main tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type, including ceiiling boards of size 595x595x12 mm thick mineral fibre board designer tiles of approved firm fixed in position complete all as specified and directed.

M/S DSSP Construction Co. (BID ID -3330057)

Paradise Interior (BID ID -3335842)

MAA SANTOSHI ENTERPRISES (BID ID -3336509)

Chandramauli Engineers Pvt. Ltd. (BID ID -3344365)

STAR CONSTRUCTION CO (BID ID -3335062)

M/S Ayub Khan (BID ID -3344421)

SHRI JI ENTERPRISES (BID ID -3336161)

GIAN BUILDERS (BID ID -3329973)