Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.5 L+₹88,249.17 (10.3%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹9.8 L+₹1.2 L (14.3%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
22 Aug 2022, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
RK PARASHARI OFFG AGE I AF STN MEMAURA
AGE I AF STN MEMAURA
Addn Altn and certain other BR and EM works at SMC at AF Stn Mamaura
2022_MES_541159_1
8258/E8
Open Tender
Coal Works
Item Rate
180 days
AF STN MEMAURA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE I AF STN MEMAURA
₹19,000
31 Oct 2022
26 Jul 2022
23 Aug 2022
27 Jul 2022
22 Aug 2022
8 Aug 2022
Amount
Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided as specified and directed.
M&L Brick work with sub class-B bricks straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:6 all as specified.
Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed .
Material & labour for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM (1:6) surfaces finished even and fair faces without using extra cement complete all as specified and directed.
M & L for prepration of new plastered or unplastered surfaces of wall applying two coats of oil bound distemper over 3mm thick wall care putty complete all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed .
M&L 15mm thick screed bed or bedding layer of cement mortar(1:6) complete all as specified and directed.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles and laid over screed bed complete all as specifed.
M&L for 300 x 450x 7 mm thick joint free Glazed ceramic coloured tiles(premium quality) in dado/skirting etc set and jointed in neat cement slurry and pointed with white or colour cement to match tiles laid over rendering complete all as specifed.
M&L Non skid ceramic coloured tiles joint free 7-8 mm thick (Square/ rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm set and jointed in neat cement slurry and pointed with white or colour cement to match tiles and laid over screed bed complete all as specifed.
M&L for 300 x 200 x 7 mm thick joint free Glazed ceramic coloured tiles (premium quality) incl dark shade border/heighlighter in dado/skirting set and jointed in neat cement slurry and pointed with white or colour cement to match to match tiles laid over rendering complete all as specifed.
Supply and fixing 50mmx50mmx1mm thick angle nosing of stainless steel(Grade-304). Including welding , grinding,buffing, polishing and making curvature(where ever required) complete all as specified and directed
Supply and fixing stainless steel dash fasteners of size 4mm through 100mm long hole for fixing the angle of stainless steel complete all as specified and directed
M &L for form work of soffits ,shelves etc. and similiar work including edges fair finished comlplete all as specified and directed.
M&L for RCC (Nominal mix) type B1 1:2:4 using 20mm graded stone aggregate for slabs supported on walls, beams and columns in, floors, foofs, landings, balconies,canopies,deck slabs and in shelves and the like comlplete all as specified and directed.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binidng with and including mild steel wire (annealed) not less that 0.9mm dia or securing with clips comlplete all as specified and directed.
M&L for 20mm thick granite (of any type) of work table rubbed and polished in steps,plateform ,cills,pillars and fixed with 15 mm thick screed bed in cement mortar 1:4 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including cutting,polishing and necessary bull nozing/full round grinding complete all as specified and directed.
S&F sinks made of stainless steel 1mm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or incuding fixing cantilever barckets and connecting union to pipe, ovrall size 495mm x 420mm bowl size 41mmx330mmx160mm comlplete all as specified and directed.
S&F 75 mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall/ laid under floor etc in waste pipes and rain water pipes incuding PVC Tee,socket elbow,clamp etc complete all as specified and directed.
S&F PVC(SWR) floor trap 75 mm bore including jointing to waste pipe in cement mortar as in repairs complete all as specified & directed.
S&F in repair 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified & directed.
M&L for MED2 2mm Lead Lined Semi Hermetic Hinge (HPCL) Double Leaf Door of size 1500X2700 45mm thick , SS Ball Bearing Hinge, SS D- handle, Double Glazed Toughened (300X300mm), Door Closer, Drop Seal, Dead lock Both side key operated &puff filling. Note :- Including taking down of old door.
Supply & fix tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed .
Cutting Chases for concealed water tubing etc and making good disturbed surfaces, cutting not exceeding 10 cm girth, on brick walls complete all as specified & directed.
S&F in repair 15 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified & directed.
S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by the Engineer-in-Charge. Make: (i)Jindal Section No.4588, 47.62mm x 44.50mm x 1.42mm thick, Wt. @ 0.738 Kg/RM or equivalent. or as per site requirment as directed by Engineer-in-Charge.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections of size ake: (i) Jindal Section No.2425, 101.60mm x 44.75mm x 1.75mm thick, Wt. @ 1.367Kg/R for door and of approved make conforming to 15 733 and 15:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief.
S & F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section as under, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Complete all as specified.(a) Style rail – Jindal Section No.4588, 47.62mm x 44.50mm x 1.42mm thick, Wt. @ 0.738 Kg/RM or equivalent. (b) Glazing clip- Jindal Section No.4430, 0.49mm thick, Wt. @ 0.071Kg/RM or equivalent. Note: Glass and other fittings material shall be measured & paid separately.
S&F 3.8 mm thick tinted glass of approved make and colour complete all as specified and directed
S&F 150 mm long Aluminium powder coated tower bolt complete all as specified and directed
S&F 100 mm long Aluminium powder coated handle complete all as specified and directed
S&F Aluminium powder coated hook and eye 125 mm long complete all as specified and directed.
S & F for floor door stopper of aluminium alloy body and tongue, 140 mm, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S& F Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 1200 mm in width and of weight not more than 35 kg and fixed aluminium(Die cast ) body type complete all as specified and directed.
Material and labour for point wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic ISI PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amp including taking down carefully existing copper/aluminium point wiring such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.
All as per serial item No 35 here-in-before but for one Fan/ exhaust fan point.
All as per serial item No 35 here-in-before but one bell/Buzzer point controlled by one push button on the same board with other switches or independent.
All as per serial item No 35here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.
All as per serial item No 35 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.
All as per Serial Item No 35 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.
Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand.
Supply and fix bell push, 06 Amp, one module, 230 Volt complete all as specified & directed.
Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand.
Supply and fix socket outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed. Make : Havells - Reo or equivalent in Anchor - Penta PC / Legrand.
S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
Supply and fix Bell ding dong type, AC, 230V, single pole complete all as specified & directed.
S & F concealed type GI Sheet enclousure for Modular switches / sockets etc. complete with a 25 Amps modular type motor starter(2 Module) with one single pole Modular type 'Ç'curve MCB of capacity 20 Amps (1 Module) & a 20 Amps 3 pin modular socket(2 module) including electrical connections all as specified and directed by Engr-in-charge. (For Air Conditioners)
Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.
S & F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed.
Supply and fix in replacement of LED mirror light fitting, 10 Watt, 2 feet long with IP 20 protection comprises of extruded aluminium housing, polycarbonate diffuser, integrated electronic driver with industrial grade heavy duty driver having THD < 10% all accessories pre-wired including connecting up complete all as directed. Make : Havells Cat Part No Endura Linear Neo or equivalent in Crompton / Philips.
Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.
Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
Supply and fix in replacement of MCB, DP, AC, 240 volt of 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.
Supply and fixing of sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 and IK 09 protection alongwith cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following: (a) Incoming MCCB, 63 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. (b) Outgoing MCB, SP, AC, 240 volt of 06 to 32 Amp, 'c' curve, 10 KA breaking capacity - 12 Nos.
Material and labour for sub main wiring with 10 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, ISI mark medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.
All as per serial item No 56 here-in-before but with 6.0 Sq mm nominal cross sectional area wire.
All as per serial item No 56 here-in-before but with 4.0 Sq mm nominal cross sectional area wire.
Taking down carefully ceiling fan/ exhaust fan of any sweep complete with all accessories, dismantling blades and kept in safe custody including painting complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and hanging and connecting up with provn of 3 core copper flexible cable of size 1.5 Sq mm from ceiling rose to fan complete all as specified & directed.
Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.
Supply & laying XLPE insulated, armoured, heavy duty, underground electric cable with aluminium conductor, 1100 volts grade, cross section area 25 Sqmm, 4 core, complete, all as specified and directed. (Note :- Excavation & Earth work shall be measured and paid separately under the respective items.)
M&L for 40mm bore GI pipe medium grade for cable protection ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr -in -Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.
Cutting walls of any type, making holes for fixing of exhaust fan/ ventilating fan for 300mm sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.
Supply anf Fix Ceiling Fans, complete with three blade, down rod, accessories,230 v, 1200mm sweep with BEE 5 Star rated squirell cage induction motor including necessary connection with ceiling rose with 3 core 1.0 Sqmm PVC insulated round flexible cable all as specified and as directed.
S & F of water heater storage type 25 Ltrs, Electrically operated, 5 star rating with FRP body and copper inner tank duly insulated with PUF insulation and heating element of 2 KW complete with all accessories such as safety valve, thermostate, NRV, PVC connection etc complete all as specified and directed.
Supply and fixing Wall Fan high speed, 400mm sweep, 1350 rpm or above, air delivery 55 CMM, 220-240 volts, AC, 50 Hz complete all as specified and directed. Make: Havells D'zire model or equivalent in Bajaj/Crompton/Orient/Usha.
Spectrum Enterprises
sunil kumar sinha
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .