construction of building

Amount

CIVIL WORKS

Earth work excavation for foundation in hard stiff clay, stiff black cotton soil, hard red earth, shales, murrams, gravel, stoney earth and earth mixed with 50% fair sized boulders and hard gravelly soil inclusive of shoring, strutting and baling out water wherever necessary including refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and an initial lift of 2m and clearing and levelling the site etc., complete

supply and filling in foundation with river sand in layers not exceeding 150mm thick, well watering , ramming and consoli- -dation etc., completed.

supplying and filling with gravel in layers of 150mm thick.well watered ,rammed and consolidated including watering ,etc.,

Cemet Concrete 1:4:8(one cement,four sand, eight aggregate) using 40mm gauge HBG stone jelly including cost of all materials and labour charges etc., complete

RCC 1:1½:3(one cement one and half sand three hard broken stone jelly )using 20mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of centering, steel reinforcement including cost of curing etc complete a) Foundation and Basement

b) IN ground Floor upto 4.5m Height 1-M3

Suplying and fabricating and placing in position of m.s rods (or) RTS for all RCC works as per design given including bending typing and cost of bending tying and cost of binding wire etc.,

Providing formwork for Centering the soffits of all R.C.C. works centering , shutter charges up to 3m height with M.S.sheets 90 X 60 cm 10mm gauge stiffened withwelded M.S. angles of size and removing the formwork after necessary curring period etc., complete as directed a) For Columns , footing and Plinth beam

b) For Lintels and roof slab

c) For sunshade and Colums.

Brick Work in C.M 1:5 (one cement,Five sand) mix using II class chamber burnt bricks of size 9" x 4 3/8" x2 3/4" for foundation and basement including scaffolding,curing etc., complete. A) For foundation and basement

b) above basement

Plastering with Cement mortor 1:5 (one cement,five sand) with 12 mm thick including cost of all materials,labour charges for finishing and curring etc., complete

Brick Partition Walls using 2nd class chamber burnt bricks of size 9"X4-3/8"X2.75") in C:M 1:3 -

Providing the cuddapah with 25mm thick for self arrangements in the GS

Plastering with Cement mortor 1:3 mix over the exposed RCC surfaces to 10 mm thick

Painting two coats of newly platered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt, and including plater of paris

Supplying and fixing the MS Steel door with the following specification MS Angle of size 40 x 40 x 6mm used for the outer frames and Ms angles of size 35 x 35 x5mm for the shutter frame stiffeners with 32mm x 6mm MS. flats is provided at required intervals in shutter frame 18 gauge CR sheet is laid as panel in the shutter and welded intact for 1/3 bottom portion of the shutter M.S flats 18 x 5mm is welded over the 32 x 6mm Ms Flat sandwitching the CR sheet in between. Additional stiffeners with 18 x 5 mm Ms flat is provided diagonally at rear side of the shutter. The balance 2/3 portion at top is provided with grill at an average weight of 9 kg/ sqm. 3 nos. of hinges in case of single leaf and 6 nos in case of double leaves shutter to be provided 6 nos of holdfasts 120mm in length made of angle section spliced at the ends are welded to the outer frame of the door.tower bolts 2 nos one at top & and other at the bottom are provided one aldrop is provided at an appropriate place in the door,A tie bar is provided

Manufacturing,supplying & fixing in position Steel windows openable shutter frame and shutter frame made out of steel section with the following specification MS Angles of size 33x25x3mm at 1.419 kg/m and mullion J section of size 45x25x3mm at 2.28 kg/m and shutter section is made 33x25x3mm at 1.419 kg/m as specified in IS7452/1990. each openable shutter should not exceed 600mm to enable separate operations and easy maintenance. the panal of the shutter should be covered with 15 gauge cold rolled sheet with horizontal stiffeners using 18x5mm flats

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and fixing 30mm thick solid core PVC door shutter with PVC frame of size 50x45mm with suitable rebate for housing the shutter (Conforming to IS 4020 with updated amendment) consisting of frame made out of MS tubes 19 gauge thickness of size 19 x 19mm for styles and 15x15mm for top and bottom rails M.S frame shall be covered with 5mm thick heat moulded PVC 'C' channel of size 30 x 50mm forming styles, and 75x50mm for top rail, lock rail and bottom rail on either side and join together other side etc. An additional 5mm thick PVC strip of 20mm width is to be stack and the interior side of the 'c' channel using PVC sealent adhesive including cost of all furniture fittings.

Providing weathering course in brick jelly lime concrete 20mm size in pure slaked lime over RCC roof slab, the projection being 32:12.5 for required depth and laid with required slope and thickness

Finishing the top of roof with one course of pressed tiles of size 23 x 23 x 2 cm of approved quality in cement mortar 1:3 12mm thick with water proofing compound confirming to IS at 2% by weight of cement used and the top pointed with same mortar is mixed with red oxide to the full depth of tiles etc., complete complying with standard specifications and as directed by the departmental officers

Flooring with following ceramic tiles of size 305 x 305 x 6mm laid over 20mm thick cement mortar 1:3 (one cement and three sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutters wherever necessary, laying in position and pointing with white cement cement mixed with colouring pigment at the rate of 0.3 kg / sqm. etc., complete complying with standard specification

Finishing the floor with premium grade designed vetrified tiles of size 600 x 600 x 8 mm of best approved colour quality laid over 20mm thick cement mortar 1:3 bed as joint free and pointing with the same colour cement added with the colouring pigments at 3.0 kg/m² etc., complete complying with standard specification

Supplying and fixing steel galzed ventilators with side hung shutter outer frame and shutter frame

Suppliying and fixing in position of Indian water closet (White) 580 x 440mm with 'p' or 's' trap including connections with PVC pipes and testing for leakages etc., complete complying with standard specification.

Dadooing the walls with coloured design glazed tiles of approved quality and size of 305 x 200 mm in cement mortar 1:2 and pointing with the white cement adding with the same colouring pigments neatly to the full depth of tiles in all floors etc.,complete complying with standard specification.

Supply and fixing in position of wash hand basin of size 550 x 400 mm white with all accerssaries such as brackets, 32mm cp waste coupling, rupper plug & chain 32mm waste hose, 15mm cp angle valve,15mm nylon connection,15mm brass nipple , 15mm cp pillar cock etc., complete complying with standard specification

Supplying and fixing of 1000 liters capacity PVC water tank with IS specification IS 10701/96 The tank is meant for outdoor (or) indoor use complete with removable hinged top locking arrangement and to make provision to fix water supply pipe lines, necessa

supplying and fixing in position 15mm dia brass Cpscrew down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary . (taps should be got approved by the Executive Engineer before use on the works)

Supply and fixing in position of wheel/Gate/ angle valves of following sizes of approved quality and best variety etc.,

Supply, laying jointing PVC pipes of approve quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls,floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., comlete complying with standard specification a) 25mm - 10kgf

110mm 6kgf

Supply the following PVC specials of approved quality and best variety a) 25mm PVC Elbow

b)25mm PVC Tee

d)25mm PVC Coupling

e)25mm x20mm PVC reducer

f)25mm Hex Nipple

g) 110 mm Elbow

h) 110 mm Tee

i) 110 mm Bend

Supply and filling in basement with wet mix 250mm thick in layers not execeding 250mm thick well watering ramming and consolidation including machenris for higher and running charges leader 5 cum capacity hire charges for tipper water springler vibtory roller etc complete and all labour charges as directed by the departmental officers.

SRIRAM CONSTRUCTIONS