Diversion and re-organization of 11 KV Karo OH line for providing hindrance free space for construction of truck receiving hopper of Karo CHP under BnK Area.

Amount

Erection of ACSR conductor of 7/3.35 mm to 7/4.0 diameter and above including binding etc as required (700 mtr X 3 wire = 2.1 km x 394 kg/km = 827.40 kg)

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Supplying of 50mmX8 mmM.S. flat ironpole top bracket/ cross arm for single11/22/33KVover head line conductor completewith fixing clamps bolts, nutsandwashersdrilling holes for insulatorpins, boltsandnutsetc and painting with primer and finish paint as required

Supplying of channel iron75mmX 40mm X 6mm(7.14kgpermetre) cross arm for two11KV overhead line conductors complete with 50mmX50mmX 6mm(angle iron bracket welded to the channel iron and complete with50mm X 6mmM.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins,bolts,nuts and washers etc(asperdrawing)and painting with primer and finish paint as required.

Supply and erection of stay set complete glavnised for 11 KV OH line with 19/20 mm dia x 1.8 mtr long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm x 600 mm) 7/4.00 mm dia GI stay wire and 11 KV strain insulator etc. in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying of two lengths of channel iron75mmX40mmX6mm(7.14kgper metre) double pole cross arm for three wire11KVoverhead line conductors complete with through bolts and nuts for clamping to the poles, 50mmX 6mmM.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the crossarms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Supplying and erection of a set of cross bracing for 11 KV over head line double pole structure having four members fabricated out of 50mm x 50mm x 6mm angle iron to form a rectangle of minimum size 1400mm width x 2500 mm height, complete with 50mm x 6mm MS flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required.

Supply and erection of 11 KV Pin insulator complete with large steel head GI in nuts and washers etc as required.

Supply and erection of 11 kv disc insulator for 11KV over head lines with galvanised insulator fittings ball and socket type and complete with strain clamps, bolt nut washers etc.as required. Double disc provision.

Erection of double pole cross arm for over head lines as required.

Dismantling of over head lines comprising of aluminium over head conductor, G.I. wire, cross arms, insulators etc as required. Conductor = 827.40 kg, Disc – 45 set x 4.5 kg = 202.5 kg, Pin – 30 set x 2.1 kg = 63 kg, G.I wire = 34 kg, Total = 2844.70 kg

Supply of 8 SWG GI wire for earth continuity (Earth continuity 600 mtr + Cradling 200 m x 3 wire = 600 mtr + lacing 224 nos x 3 mtr = 672 mtr x 0.131 kg/mtr = Total = 245.23 kg )

Erection of 8 SWG GI Wire including binding etc as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc as required.

Supplying and fixing of silicon wrap of 11KV grade

Supplying and fixing of silicon wrap of 33 KV grade

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 1 km x 3 mtr = 3000 sqm

Transportation of new pole to working site and dismantled pole from working site to Store.

Total impact of GST for the purpose of CTC