CWE/P-02/2025-26

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast, complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm, complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and directed.

S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F pressed steel frames for door made out of MS Sheet 1.25mm thick of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

S&F 35mm thick plain framed panelled door shutters of 2nd class hard wood (Factory made) two panel with lock rail and panel of 9mm thick BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 Part-I, Kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) all as specified.

S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid forseparately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 5mm moulded prelam PVC sheet on front face and 5mm plain colour PVC sheet on back face with wood free EPS, complete all as specified & directed.

S&F 150mm size, extruded Stainless steel handles, fabricated type, anodised, complete all as specified & directed.

S&F 150mm long Stainless steel tower bolts (ISI Marked) extruded type all as specified, complete all as specified & directed.

S&F in repair, 300mm, spring for door, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified & directed.

S&F 300mm long stainless steel, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections, complete all as specified & directed.

S&F 100mm long butt hinges cold rolled ISI marked mild steel, complete all as specified & directed.

M&L framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified & directed.

S&F Windows, Ventilators fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/ Sqr. Mtr.) with total coated thickness of 0.60 mm Paint specifications: - Coated Sections should be coated with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Dimensions of Sections: -Sections for Frame should be of 72mm X 50mm, Section for Mullion should be of 72mmX50mm, Section for Shutter Frame should be of 47mm X 20mm, Section for Fixed Glass Bead should be of 12mmX12mm, and Section for Fly mesh should be of 40mm X 20mm. Fixing Details:- Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined to the Frame/ Mullion using Nylon cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon profile should be used around Fly mesh to fix Mesh in Mesh Shutter. Accessories:-Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay. Window frame should be fix to brick/concrete masonary by using Nylon-self expanding caps & driving MS electroplated 80mm long screws into the caps through frame. Glass:- Glass shutter & fixed glass portions should be provieded with a glass of 5mm plain float glass. Mesh:- Mesh shutter should be provided with a stainless steel 32 Gauge fly mesh of 304 grades with 144 holes per square inch. Grill:- Window should be provided with grill made of 10 mm Sq MS bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.

Providing and Fixing Pre painted Steel Sliding Window 3 Track-3 Panel Sliding Window fabricated from Roll formed sections made of galvanized Steel color coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 108x45mm, Section for shutter should be of 36x50mm. The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Damien Monomer (EPDM).The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding brackets & screws, complete all as specified & directed.

S&F stainless steel wire cloth 0.46mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples/wodden bedding, complete all as specified & directed.

M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces including preparation of surface and one coat of pink primer, complete all as specified & directed.

M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

M&L for preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.

M&L for brick work in cement mortar 1:4 of old size sub class ‘B' bricks straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

All as per description of Srl item No. 26 above but except bricks complete all as specified and directed

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

M&L rendering 15 mm thick on concrete in CM 1:3 in facia or ediging of chajjas, ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to crackes in RCC surfaces in true line/shape by providing RCC 1:2:4 type B1 using 20mm graded crushed stone aggregate including all necessary from work to thickness at required at GF and FF finish even and smooth without using extra cement complete all as specified and as directed. NOTE - The rate will inclussive of scafolding for single or double story including making holes in brickwork and making good in cement mortor.

Taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water all as specified and directed

M&L Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement as in ceiling and applying two coat of oil bound distemper over a coat of primer complete all as specified.

M&L Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) on fair faces of brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement including water proofing compound etc, complete all as specified & directed. NOTE - The rate will inclussive of scafolding for single or double story including making holes in brickwork and making good in cement mortor.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.all as specified and directed.

M&L washing rubbing down and scrapping of distempered and painted surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old prepared surfaces of wall .all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L applying 1mm wall care putty on walls and make the surface of level even and smooth, including preparation and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L Complete removal of existing treatment from internal surfaces of walls by wire brushing and washing, rubbing down and stopping of surfaces , applying 1mm wall care putty on walls and make the surface of level, clean and repair disturbed edgs of bricks/concrete walls finish to even and smooth and applying two coat of oil bound distemper over old surface all as spd and directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surfaces of ceiling including cornices plasters by brooming down with steel wire brushing, scrapping down smoke soot moulds, moss and efflorescent salt and trading oil & gressy spots etc and applying one coats of oil bound distemper on ceiling complete all as specified & directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick in CM 1:6 incl Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4, incl Dismantling of wall tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, all as specified and directed.

M&L Double charged vitrified tiles , 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid over screed bed 15 mm thick in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl Dismantling of floor tiling incl cement mortar bedding (but not backing) removing servicable tiles to a store and rubbish off premises, all as specified and directed.

M&L Double charged vitrified tiles, 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm laid in vertical surface over and including 10 mm thick CM 1:4, including dismantling of wall/floor tiles surface complete all as specified & directed.

S&F GI tube 15mm bore medium grade galvanised ISI marked with all fittings complete on walls incl taking up or down GI pipes 15mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed.

Complete all as per item No. 43 above but except pipe

S&F GI tube 20mm bore medium grade galvanised with all fittings and fixed to short length incl taking up or down GI pipes 20mm bore and connection including cleaning for refixing or removal un-serviceabl pipe, complete all as specified and directed.

Complete all as per item No. 45 above but except pipe

M&L for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed. (a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC, SIKA etc.

S&F in repair vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed. Make CERA Cat part No. COVYNAS-3010109 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed. Make CERA Cat part No. S1053121 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

Vitreous china wash hand basin, white, flat back, size 550x400mm (Make : Jaquar Cat part No CNS-WHT-801 or equivalent to the other makes mentioned in Appx 'F'). including 15mm bore brass chromium plated centre hole basin mixture with regular spout without popup waste system with 450mm long braided hoses, 20mm cartridge size (Make : Jaquar Cat part No FLP-5001BPM or equivalent to the other makes mentioned in Appx 'F'.), brackets, CP waste coupling, 32mm bore PVC waste pipe of min 600mm long, including cutting for and pinning in end of brackets or erecting stand, fixed in repair, etc complete all as specified and directed.

S&F for SS Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs complete. Make-Jaquar (cat part No.CPA-1111 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repair for Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 50cm long etc complete all as specified and directed

S&F for Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing. Make Jaquar(cat part No.ACN-1173) or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repairs low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe complete all as specified and directed. Make CERA Cat part No. CONGO-B1010112 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair bib taps long body, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore complete all as specified and directed. Make-Jaquar (Cat Part No.FLP-5037PM) or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repair Sink cock with regular swinging spout .Make Jaquar (cat part No.FLP 5347PM) or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repairs 15mm bore angle valve chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed. Make Jaquar FLP-5053PM or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F in repairs concealed stop cock 15mm bore chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore complete all as specified and directed. Make Jaquar Cat part No. ALD-069FT or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F grating Square 100x100 mm size of stain less steel as in repair, complete all as specified and directed.

S&F in repair shower 100mm fixing with 15mm pipe incl shower arm 15mm size complete all as specified .Make - Jaquar (cat part No. OHS-1661) or technocommercially equivalent to the other makes mentioned in Appx 'F'.

M&L in repairs 75mm floor trap, including fixed in cement type B-1 1: 2:4, complete all as specified and directed.

M&L in repairs 75mm PVC Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

M&L in repairs 75mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed.

M&L in repairs 110mm dia PVC (SWR) soil or waste pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

M&L in repairs 75mm dia PVC (SWR) soil or waste pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

M&L in repairs 75mm PVC Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured)

Taking down eaves gutters (any size or pattern), CI pipe including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with clamps complete all as specified and directed.including taking down of old unserviceable rain water pipe of any dia and position.

Complete all as per Srl item No. 70 but laid in floor/ tranches

S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.

S&F UPVC underground drainage pipe (UDS) type 'B' 160mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing cement concrete (1:4:8) type D-2 using 40mm grade stone agg as in bed for 160mm bore pipes incl packing under and huaunching against the sides of pipes after they are laid tested incl Taking down old damaged SGSW pipes from existing lines including necessary excavation of old fitted in trenches, complete all as specified and directed.

Cutting into existing manholes for connecting new drains/ pipe of any dia, making good to pipe and making good of broken manhole, complete all as specified and directed .

S&F in repairs stainless steel curtain rods 25mm dia fixed all as directed and as approved by Engr in Charge.

S&F stainless steel brackets suitable for 25 mm dia rod fixed with screws and gutties in wall, including end caps with wall ornament and fixed to curtain rod with screws of design/shape, complete all as specified and directed.

M&L for 18- 20 mm thick Granite ( table rubbed and polished) Jet black on cooking platform and like in cement mortar(1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

S&F, Stainless steel Plate rack 775X750X 0.6mm thick, complete all as specified and directed.

S&F for Flushing jet spray/health faucet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete.Make-jaquar cat part No.ALD-565 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

S&F for PVC waste pipe 32mm dia, 60 cm long for WHB with cup, fixed in repairs, complete all as specified and directed.

S&F for PVC waste pipe 38mm dia, 60 cm long for sink with cup, fixed in repairs, complete all as specified and directed.

S&F Rotational moulded polyethelyne water storage tank two layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts incl dismantling water tanks (Capacity of tank exc 250 Ltr but n exc 500 Ltr) and removing from site complete all as specified.

S&F Rotational moulded polyethelyne water storage tank two layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and brass valve 20mm high pressure with polyethelyne float and fly nuts incl dismantling water tanks (Capacity of tank exc 500 Ltr but n exc 1000 Ltr) and removing from site, complete all as specified.

S&F in repair CP toilet paper holder, superior quality complete all as specified and directed. Make- Jaquar cat part No.CPA-1151 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

Demolition of cement concrete ( reinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

S&F in repairs soap dish dish type of milld steel Chromium plated and wooden/plastic cleats , complete all as specified and as directed. Make - Jaquar cat part No CPA-1131 or technocommercially equivalent to the other makes mentioned in Appx 'F'.

M&L for RCC as in shelf (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cover slabs kitchan platform, shelves and similar articles including necessary moulds/formwork set in cement mortar (1:6) complete all as specifed and directed.

M&L for TMT bars 10mm dia and over cut to length, bend to shape required including cranking, bending, spirally for hooping columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Use and waste formwork to soffits of Kitchan cooking platform slabs and similar work; not exceeding 200mm thick (Horizontal or sloping.

S&F in repair stainless steel chromium plated, plated peg set of six fixed with screw complete all as specified and directed.

M&L for 20mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed in repairs

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness (below or above ground level), complete all as specified & directed.

M&L 50mm thick plain cement concret type C-1 1:3:6 (using 20mm graded crushed stone aggregate) as in Plinth protection all as spd and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for, complete all as specified & directed.

M&L Machine cut Kota stone slab 16-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Machine cut kota stone slab flooring 16-18mm thick over 10 mm cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L liquid water proofing treatment to RCC roof slab incld dismantling of existing treatment of any description in following procedure :- (a) Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reiforcing acrylic fibers with sun reflective index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 MPa and shell have reack bridging ability upto 2.5mm and shell resist 10 bars of hydrostatic ptessure reduce surface temperature upto 10 degree Celsius with 33% dilution as priming coat. (b) laying of fiber mesh 0.3mm thickness weave in leno pattern having weight 45gm/Sq m and pastering it properly with overlap of 50mm and allow it to dry. (c) Applying second coat undiluted @0.450 ltr/sq m as directed by Engr-in- Charge. (d) Applying third and final coat undiluted @0.450 ltr/sq m as directed by Engr-in- Charge.

M&L padding as in roof in PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate with and incl integral water proofing compound @ 3% weight of cement and providing necessary slope towards outside.

M&L for 10mm thick cement rendering in CM 1:3 and finishing the surface even and smooth berfore application of priming coat complete , all as specified and directed

M&L for Non abrasive paving (rectified endura) cement concrete coloured tiles 300x300mmx8 to 10mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over 15mm thick screed bed in cement mortar 1:4 includind demolition/dismantling old surface/tiles complete all as specified and directed.

M&L 75mm thick plain cement concrete type C-2 1:3:6 (using 40mm graded crushed stone aggregate) as in flooring/Sub base all as spd and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggt as in coping all as spd and directed.

S&F in repairs sinks made of stainless steel without drainage board lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L prelaminated 18 mm thick lead free factory made 100 % solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30 % wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg(+- 5%) manufactured by ISO 9001-2015 certified company.the sheet should be 100 % water proof,termite proof ,fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness. complete including all fittings like handle,piano hinges, hinges,hydraulic stoper,beading etc as per direction of Engr-in-Charge.

S&F of round stainless steel cabinet knobs/drawers handlers dia of 27mm complete all as specified and directed. Make:- Godrej Kitchen fittings, Sleek by Asian Paints, Hettich

S&F Continuous (Piano) hinges, mild steel , bright finish or electro galvanised with wide of flaps 30mm in repairs all as specified and directed.

S&F 100mm Hasp and staple, safety type, stainless steel including bolt to hinge plate and fixed with screws complete

S & F Magnetic door catches with sticking plate of standard size for cupboard doors approved by GE

S&F 125mm size, extruded stainless handles, fabricated type, anodised, complete all as specified and directed.

S&F 75mm size, extruded stainless steel handles, fabricated type, anodised, complete all as specified and directed.

S&F of stainless steel 304 grade electro-polished for corrosion resistance modular thali holder / basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed. Make : Cat Part No 5704 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints, Hettich.

S&F of stainless steel 304 grade electro-polished for corrosion resistance modular cup & saucer holder / basket size of 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg complete all as specified and directed. Make : Cat Part No 5837 Godrej Kitchen fittings, equivalent in Sleek by Asian Paints, Hettich

S&F SS 304 grade 200mm length stainless steel cabinet drawers handles complete all as specified and directed. Make:- Godrej Kitchen fittings, equivalent in Sleek by Asian Paints, Hettich

S & F in repairs of stainless steel grain trolley SS 304 grade having size of 525x485x350mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed. Make : Cat Part No-6175 of Godrej Kitchen appliances, equivalent in Sleek by Asian Paints, Hettich

S & F in repairs of stainless steel Plane wire Basket/ trolley SS 304 grade having size of 506x480x200mm, with heavy duty and grade steelwith finish of zinc, corrosion resistance with telescopic drawer channel having weighing capacity of 25 kg complete all as specified and directed. Make : Cat Part No-4265 of Godrej Kitchen appliances, equivalent in Sleek by Asian Paints, Hettich

S&F stainlesss steel modular perforated cutlery basket SS 304 grade of size 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed. Make Godrej kitchen appliances, equivalent in Sleek by Asian Paints, Hettich

S&F stainless steel 304 grade Size 180x515x485 mm pull out detergent rack Cat No ASSEDP180510485 having two shelf spaces with telescopic drawer channel having weighing capacity of 6 kg complete all as specified and directed. Make: Godrej Kitchen appliances, equivalent in Sleek by Asian Paints, Hettich

M&L Rolled sections (Fe-410-W(Gde-E-250) quaility B) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl dismantling of Asbestos cement (Corrugated, semicorrugated, etc) sheets in roof coverings,. Sheet colour approved by Engineer-in-Charge complete all as specified and directed.

Supplying & Laying GI pipe 20mm dia bore medium grade in trenches with all fittings as directed including taking down old unserviceable GI pipe complete all as specified and directed. Note:- (Earth work will be measured and paid under respective items of sch 'A').

Supplying & Laying GI pipe 50mm dia bore medium grade in trenches with all fittings as directed including taking down old unserviceable GI pipe complete all as specified and directed. Note:- (Earth work will be measured and paid under respective items of sch 'A').

Cutting existing steel tubing for alternations or additions and screwing existing steel tubing for alternations or additions or lengthening screwd on pipe to from connector up to 50 mm bore, complete all as specified and directed.

S&F in replacement of gun metal gate valves of 50mm bore size with iron wheel head, screwed both ends for iron pipe ISI marked as per IS 778 complete all as specified and directed.

S&F in replacement of gun metal gate valves of 20mm bore size with iron wheel head, screwed both ends for iron pipe ISI marked as per IS 778 complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of pipes including getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil, complete all as specified and directed.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L Point wiring with 1.5 Sq.mm (nominal area) FRLSH PVC insulated and sheathed multistranded copper conductor cable 1100 Volts grade drawn through and incl PVC rigid concealed conduit (ISI Marked) 20 mm dia heavy grade having thickness not less than 2.0 mm with all accesories incl approved make sunken modular metal flush gang box (16 gauge) and suitable support frame and cover plate (inner/outer) of required modules switch sockets complete connection of cable with MCBs through proper size copper/brass thimbles for one light/fan/bell point controlled by one 1 way switch.

All as per item No. 129 above but for one light point controlled by two switch 6 Amp SP, two way, 240 Volts. complete all as specified and directed.

All as per item No. 129 above but for one 5 pin 6 Amp socket outlet point on same board controlled by one way switch SP, one way 6 Amp, 240 Volts complete all as specified and directed.

All as per item No. 129 above but for one 5 pin 6 Amp socket outlet point on independent board controlled by one way switch SP, one way 6 Amp, 240 Volts complete all as specified and directed.

All as per item No 129 above but using 4.00 Sqmm (nominal area) multistranded copper conductor cable for geyser/AC/power socket sheet metal plug socket outlet/metal plug top including 4.00 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for one 6pin socket outlet 16 Amps multi purpose on independent point complete all as specified and directed.

M&L in replacment for Modular switch piano flush button SP, 1 way 5/6 amps 240 volts with polycarbonate body, complete all as specified and directed.

M&L in replacment for Modular switch piano flush button SP, two way 5/6 amps 240 volts with polycarbonate body, complete all as specified and directed.

M&L in replacment for Modular switch piano flush button single pole one way 15/16 amps 240 Volts with polycarbonate body, complete all as specified and directed.

M&L in replacment for Modular socket out let, 6 pin 5/6 and 15/16 amps multi purpose 2 in 1 flush type, 240 volts with polycarbonate body, complete all as specified and directed.

M&L in replacment for Modular socket 2 in 1 ,6 amps 2/3 pin Combined 2 Modular , 240 volts. with polycarbonate body, complete all as specified and directed.

M&L in replacement of Modular bell push flush button,SP one way 5/6 amps 240 volts with polycarbonate body, complete all as specified and directed.

S&F in replacement of Bell Ding Dong, AC 230 volt, Single Pole complete all as spd & directed.

S & F in replacement of lamp holder batten type polycarbonate body with back plate for batten fitting, fixing with proper round block all as directed by Engr-in-Charge.

S & F LED lamp 9 watt, 230 volts retrofit type complete all as specified and directed all as specified and directed.

M&L for ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body, complete all as specified and directed.

S&F of decorative wall light white in colour made up of polycarbonnate body suitable for and including 15 watts retrofit LED lamp complete all as specified and directed.

S&F SPN MCB DB 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 200Amps, insulated neautral bar, earth bar and cables ties for cable management including polyuthrene gasket complete all as specified and directed.

S&F SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 43 and IK 09 rating having fully insulated copper busbar of rating not less than 200Amps, insulated neutral bar, earth bar and cables ties for cable management including polyuthrene gasket complete all as specified and directed.

S&F in replacement MCB SP 240V, 50Hz of rating 6 to 32 Amp with breaking capacity of 10 KA having bi-connect terminals on the bottom terminals for looping and 35 Sqmm termination capacity on both terminals with insulated sliding shutters and two position DIN rail clamp for easy mounting complete all as specified and directed.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L in replacement of Sub main wiring in two single run FRLS PVC insulated cable 6 Sqmm (Nominal dia) copper conductor (multistrand) and drawing in and including new PVC concealed non metallic conduit pipe ISI marked including one run 6 Sqmm multistranded copper conductor FRLS PVC green colour insulated unsheathed cable for earth continuity complete all as spd and directed.

S&F fans complete with blades, down roads, electronic regulators (Modular Fan regulator) and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Supply, fixing and installing in replacement of the electric water storage heater of ABS body type of 25 ltr capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temprature adjustable knob including steel braided flexible connection for pipe of size 15 mm dia bore with G I hexagonal adopters/Nuts on the both sides for inlet (cold water supply) & outlet (hot water supply) and including mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation complete, including dismantling of old unsv geysers and depositing to MES store yard all as specified and directed.

S&F in replacement of exhaust fan, Mild steel body AC single Phase. 230V of size 300/350mm sweep with, blades, and frame and louvers, complete all as specified and directed.

S&F of 1 x 20 watt, LED 4 ft luminaire with extruded Aluminium housing with polycarbonate diffuser. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification. Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of atleast 100 lumen/watt with a maximum system wattage of 20 Watts with Inbuilt surge protection of 4Kv. The luminaire shall be designed so as to ensure 70% lumen depreciation of up to 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD 10% and suitable for an operationg voltage range of 150-265V AC and operating temperature range -10 C to +50 C. Note:- LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

S&F of 1 x 20 watt, LED 2 ft luminaire with extruded Aluminium housing with polycarbonate diffuser. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 classification. Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of atleast 100 lumen/watt with a maximum system wattage of 20 Watts with Inbuilt surge protection of 4Kv . The luminaire shall be designed so as to ensure 70% lumen depreciation of up to 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD 10% & and suitable for an operationg voltage range of 150-265V AC and operating temperature range -10 C to +50 C . Note:- LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

S&F of 10 watt LED bulkhead industrial luminaire with Pressure die cast housing and Polycarbonate diffuser and silicon gasket. The luminaire should have a color CRI > 80, and CCT of 5700K. Lifetime of 50K hours @L70.The luminaire shall be compliant with IP65 & IK07 classification. Luminaire shall be designed to emit at least 900 nominal lumens at a system efficacy of at least 90 lumen/watt with a maximum system wattage of 10 Watts. The electronic driver used shall have a power factor >0.95 and THD <15% and 4 Kv inbuilt surge protection & withstand upto440V AC for 12 hr. Note:- LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

S&F exhaust fans AC single phase 230/240 V of size 200 mm sweep 5 blade off white colour made of polycarbonate body with louvre including connecting to ceiling rose all as required or directed.

M&L for cutting hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos for fixing exhaust fan all as spd and directed. Note : (i) Rates are deems to be included to making the cutting hole smoothly and colour wash as per exisiting colour. (ii) Rates are deems to be including charges of hiring T & P, i.e. ledder square folding and insurance of labour deployed, being holes are made to be at mutlistorage bldgs of different height .

S&F in replacement of sheet metal enclosure Vertical type (VTPN) distribution board, double door, tripple pole & neutral 415 volts 4 way degree of protection IP-65 DBs TPN suitable for MCCB as incommer and as outgoing MCB, 415 Volts incl MCCB 415 V 63 Amp 16 KA as incomer and 16 Nos MCB SP of Cap upto 63 Amp as a outgoing complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified and directed.

S&F of high-quality integrated 45W LED Street Light with a minimum system lumen of 5400 Lmn and system wattage not exceeding 45W with a nominal efficiency 120 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with Toughened Glass cover to with stand extreme environments with PF > 0.95 with THD>10%. Lifetime of 50K hours @L70.. The Ingress protection should be minimum IP 66 with an IK rating of 07. The Luminaire should have 4KV internal surge protection duly bolted in the Luminaire & external SPD of 10Kva & withstand upto440V AC for 12 hr . The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Note:- LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I, complete all as specified and directed. Notes: 1. Earth strip & protection pipes length upto & including 7.50 metre is deemed included in unit rate quoted by the contractor. 2. Earth filling shall be done by vegitable soil. 3. Soil shall be free from stone, boulders, aggregate, gravels.

M&L in replacement of single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp 'C' curve, complete all as specified and directed.

M&L for taking down Electric meter and refixing the same, in same or new location complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core, in replacement complete all as specified and directed.

All as per item No. 163.00 above but for size 35 sq mm 4 core

All as per item No. 163.00 above but for size 25 sq mm 4 core

All as per item No. 163.00 above but for size 10 sq mm 4 core

S&F of high-quality integrated 90W LED Street Light with a minimum system lumen of 10800 Lmn and system wattage not exceeding 90W with a nominal efficiency 120 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with Toughened Glass cover to with stand extreme environments with PF > 0.95 with THD>10%. Lifetime of 50K hours @L70. The Ingress protection should be minimum IP 66 with an IK rating of 07. The Luminaire should have 4KV internal surge protection duly bolted in the Luminaire & external SPD of 10Kva & withstand upto440V AC for 12 hr . The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. Note:- LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters.

M&L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified and directed.

Supply and laying sub class 'B' bricks of old size (230x115x75 mm) or of size locally available , laid along alignment of cable as protection to cable in trenches complete all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

GANDOTRA CONSTRUCTION CO (BID ID -3321811)

Abrol construction co (BID ID -3322837)

M/S SINGH AND ASSOCIATES (BID ID -3323416)

TRIVENI CONSTRUCTIONS (BID ID -3323198)

Standard engineers (BID ID -3322864)

PURBANCHAL BUILDERS (BID ID -3323068)

SATISH AND CO (BID ID -3322982)

bamral builder (BID ID -3323062)

SRM BUILDERS AND ENGINERS PVT.LIMITTED (BID ID -3323097)

MAMTA ENTERPRISES (BID ID -3322867)

R R CONSTRUCTION (BID ID -3323129)

JAGSON CONSTRUCTIONS LTD (BID ID -3323133)