Construction of Public Toilet at Manikkavasagar Nagar in Ward No.13, North Zone.

Amount

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton , caly, hard stiff caly, hard red earth, murram, stoney earth, gravel and shales etc., excepting all kinds of rock and boulders exceeding 0.014c.u.m in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and lift as per direction of Engineer-in-charge.

Providing and laying well gravel including cost nad conveyance of all materials form approved quarrires as noted in lead chart to the road side including loading, unloading and stacking the well gravel at road side to departmental gauge for premeasurement including labour charges for laying spreading levelling to camper etc., complete as per specification.

Cement concrete 1:4:8 (One cement, four sand and eight aggregate) using 40mm gauge HBG stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc, complete complying with standard specification.

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC Column, footing, plinth beam, stair case etc, in all floors using mild steel sheets of 90cm x 60cm and 10 gauge stifffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed by Sl.No.122

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29m high for planesurfaces such as RCC Slabs etc., in all floors with all cross bracing using mild steel sheets of size 90x60xcm and BG 10 Stiffened with welded mild steel angles of size 25x25x3mm for boarding laid over country wood joists of size 10x6.50cm spaced at about 90cm centre to centre and supported by Casuarinas props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

Supplying and erecting shuttering including necessary supports for plane surfaces such as Vertical surface etc., in all floors using mild steel sheets of size 90x60 cm & BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complte complying with standard specification and as directed.

Supplying and erecting shuttering including necessary supports for plane surfaces such as Drain walls etc., using mild steel sheets of size 90x60cm and 10 BG stiffend with welded mild steel angles for boarding supported by Casuarinas props at suitable intervals etc., complete complying with standard specification and as directed.

Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification.

Cement concrete 1:1.5:3 (One cement one and a half sand and three aggregate) using 20mm gauge HBG stone jelly for ALL RCC works excluding centering, shuttering and cost of reinforcement grill but including curing finishing etc., complete and also including fixing fan calmps and fixtures in RCC works wherever necessary as directed by departmental officers etc., complete.

Plain cement concrete in 1:2:4 mix (one cement, two sand, four metal) using 20mm size Hard broken stone as per the direction of departmental officers etc., complete.

Brick work in cement mortar 1:5 (one cement and five sand) using best quality of second class (chamber burnt) bricks of size 9"x43/8"x23/4" for the following including curing etc., complete complying with standard specification. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost.

Special ceiling plastering and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc., with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessay using the same mix as directed by the departmental officers etc., complete complying with standard specification.

Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications.

Dadooing the walls with white colour Glazed tiles of best approved quality ion cement mortar 1:2 (One cement and two sand) and Pointing with the same colour cement neatly to full depth of tiles in all floors as directed by the departmental officers and complying with standard specification. The colour of the tiles should be got approved by the departmental officers before execution.

Flooring with scratch proof ceramic tiles of approved quality and colour of size 305*305*6 mm in all floors over 20mm thick C.M 1:3 (One cement and three sand) base above the existing bed concrete and pointing with same colour cement added with colouring pigmates at 4.00 kg/m2 etc., complete complying with standard specification.

Manufacturing and supply of RCC per cast salb 75mm thickness including molding charges etc.,

Hoisting the pre cast slabs placing in position including pointing with cement mortar etc,

Supplying and fixing in position white galzed Orrisa pattern Indian water closet of size 580x440mm, P or S trap of approved quality confirming to IS 2556- part XI with sand cushion and forming flooring all-round the closet using 40mm broken jelly in lime concrete 1:2:5 (one part of line two part of sand and five part of brick jelly) 100 mm thick and finishing the top to required slope including giving necessary conncection to soil pipes and supplying and fixing 10 litre low level PVC flushing tank with fittings, MS brcakets, 32mm dia meter flush pipe with fittings and clamps including painting brackets, dismantling wherever necessary and redoing complete.

Supplying and fixing of position of Indian make white galzed earthwere wash basin 550mm x 400mm with all accessories such as cost of Iron brackets, 32 mm dia C.P waste coupling, Rubber plug and chain, 32 mm dia 'B' class, G.I Waste pipe, 15mm dia, G.M wheel valve, 15mm dia nylon connection, 15mm dia Brass Nipples, 15mm C.P pillar tap etc., Complete as per directional of departmental officers.

Providing and fixing soild panel pvc door with frame including Transportation Charges etc., complete, as per directional of deparmental officers.

Providing and fixing M.S Grill gate with using all round 'L' angle for frame, patta and using 18 gauge MS Plate for shutters with necessary hinges, tower bolt and locking arrangements complete including applying a priming coat of approved steel primer.

Painting with plastic Emulsion paint two coats along with base m coats of approved quality (ISI standard) paint as per the standard specification (The paint to be used should be got approved by the Executive engineer before use of work)

Painting Iron works for doors, windows & Ventilators, Iron bars, weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over the existing red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffloding charges etc., complete complying with standard specification. (The paint to be used should be got approved by the executive engineer before use on work).

Wiring with 2x 1.5 sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoried in flush with all with 3 mm thick hylum sheet cover with TW switch box and 5A switch and making good of the concealed portion with suitable colour for PVC concealed light/Fan point (For electronic regulator) (5 Points per coil) SD.24

Wiring with 2x 1.5 sq.mm (22/3.0) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoried in flush with all, with 150x100x113 mm TW switch box with 3 mm thick hylum sheet cover with TW switch box and 5A 3 pin non interlocking CS Plug with continous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point SD.36

Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25 mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains etc, complete as per directional of departmental officers.

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu. Cunductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour SD.55

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall of ceiling with flu tube with PVC unsheathed copper leads form terminals to the SD.83

Supply and laying of 2x10 Sq.mm PVC armored LTUG cable in a Trench to be excavated at a depth of 0.75 mtr covering the cable completely with brick and sand and refilling the earth to make good SD. 192

Supplying and fixing in position of the following G.I specials (Heavy type) of approved quality and good variety excluding the fixing charges but including necessary cutting and threading of G.I pipes for jointing the G.I specials and providing two coats of painting with good quality and approved variety of synthetic enemel paint in the case of tarring in the case of pipe line above ground level and one coat of tarring in the case of pipe line below ground level etc., complete.

2" UPVC Pipe

2" UPVC Coupling

2" UPVC Elbow

2" UPVC Tee

2" dia Ball valve

3/4" UPVC Pipe

3/4" UPVC Coupling

3/4" UPVC Elbow

3/4" UPVC Tee

3/4" UPVC Tap

4" PVC pipe

4" PVC Elbow

4" PVC Tee

Manufacturing , supplying and fixing of stainless steel Hand rails for staircase near wet riser using 50 mm dia 304L Grade stainless steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade stainless steel pipe of 25mm dia of 1.60 mm thick welded t the railing. The supports will be grouted into the wall and provided with 93.00 mm thick stainless steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding,, cutting, grinding, conveyance, welding charges, electrical charges etc., complete.

Supplying and fixing of ISI quality PVC tank for 1000 liters capacity including cover as per the direction of departmental officers.

Conveying the excavated earth and debries from the site to Out side of the city limit