PROVISION OF YELLOW METALLIC BOARD WITH INSTRUCTION PLATE AND PLATFORM SHELTER FOR WCDMA DG SET AND EQUIPMENT CABIN AT SITE I SITE II AND SITE III AND CERTAIN REVENUE AND MINOR WORKS AT AFA HYDERABAD

Amount

SCHEDULE A B/R PART : Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar ,removing serviceable tiles and disposal of debris off the premises all as specified and directed

Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc and removal of rubbish off the premises all as specified & directed by EIC.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as speecified and directed

Excavation in post holes each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm in hard/dense soil and making good surface all as specified and directed

M&L Plain cement concrete 1:2:4, Type B2 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc., complete all as specified and directed.

M&L for cement concrete type B1 (1:2:4) using 20 mm graded stone aggregates in lintels upto 1.5m clear span, cills, steps seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed

M&L for Cutting holes into or through in stone walls having superficial area nexc.150 Sq.cm built in cement mortar or cement lime mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed

M&L for Cutting holes into or through in brick walls having superficial area nexc.150 Sq.cm built in cement mortar or cement lime mortar and walls of cement concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed

Formwork for rough finished surfaces of concrete to edges of concrete flats, breaks in floors, openings in concrete walls, floors roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide all as specified and directed

S&F Rolled mild steel of Grade Fe 410 -W(Gd E-250) Quality-A for framed work as in metallic doors, boards or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M&L for MS bolts and nuts made with hexagonal or square headed one end and screwed the other and to be fitted with washer and one nut n exc 30 cm long complete all as specified and as directed

S&F for MS plain black sheet 1.60mm thick in wall cladding, metallic boards, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed

S&Fof Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240. all as specified and directed

S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.5mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.

M&L for broken stone or boulders Hardcore of gauge n exc.63 mm, deposited, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surfaceall as specified and directed

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded aggregate as in sub base complete all as specified and as directed..

M&L cement concrete type B-1 1:2:4 using (20 mm graded aggregate) 40 mm thick as in floors, finishing cement concrete surfaces even and smooth w/o using extra cement all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over and including screed bed in CM(1:6) 15 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L for Vitrified Ceramic tiles of light shade10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc laid over and including screed bed in CM(1:6)15mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for preparation of wall surfaces and applying two coat of cement based paint over a coat of primer complete all as spd & directed by Engr in Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of redoxide zinc crome primer on Surfaces of any description,over 10cm in width or girth, not otherwise describedcomplete all as specified and as directed.

S&F of ACP board of 4-5mm thick over the metallic sheet with self adhesive sticker having 80 to 100mm micron thick cut to shape of letters, lines, dashes, arrows, comma, full stop, emblem to expose an instruction/application details similar to specification of fire extinguishers in the form of paragraph, bulleted points etc. with desired fonts and sizes of letters to expose legibly the entire content of the instruction manual. Size and shape of letters are cut in electronic plotter as directed and pasted to ACP board provided with appropriate self adhesives including fixing of ACP board to the MS sheet with necessary screws/bolts complete all as through proper drilling and forming hole. complete all as specified & directed by Engr in Charge.

M&L for Cement concrete filling,mass concrete1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation bed concrete filling,mass concrete etc complete all as specified.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate in sub base complete all as specified and as directed

M&L for 75 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate in floors finishing surface even and smooth with out using extra cement complete all as specified and as directed

M&L for glass dividing strips 3 mm thick & 28 mm width inserted in position in floors complete all as specified and as directed

S & F for Rolled mild steel (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 W(GdeE-250) quality 'A' all as specified and directed

M&L for MS plates Fe 410 Gd E250 in trusses (framed), etc connecting with bolts/welding as base plates/connecting plates etc complete all as specified and as directed.

M & L for Providing precast cement concrete solid building blocks exc 10cm thick, Type C1 1:3:6 using 20 mm graded aggregate in CM 1:6 complete all as specified and as directed.

Removing excavated surplus soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

M&L for 15mm thick rendering in CM(1:6)on fair faces of brick works finished even and smooth without using extra cement complete all as specified and as directed

M&L for preperation of new concrete /plastered surface of any description,applying 3mm thick wall care putty and two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing ) and removing rubbish off premises complete all as directed.

Supply only liquid water proofing compound

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 and nexc .11 sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match laid over and incliding the screed bed in CM (1:6) 15mm thick tiles complete all as specified and directed.

S&F of Glazed ceramic coloured tiles of size 300 x450x7mm thick, in vertical surfaces of skirting/dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 10mm thick CM (1:4) in tiles complete all as specified and directed.

S&F in repairs bib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap) all as specified and directed.

Preparing newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer etc complete all as specified and as directed.

S&F in repairs of Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F in repairs of PVC valveless, syphonic action type, flushing cistern, low level, 10 ltr capacity, white, with inlet, ball valve, float and handle including brackets etc complete all as specified.

S&F in PVC connection pipe suitable for connecting flushing cistern and WHB etc 450mm long complete all as specified and directed.

S & F waste coupling of PTMT 32mm bore for urinal / wash basin (Half or full threaded ) (Minimum Weight 45 grams) all as specified and directed.

S&F in repairs of Vitreous china wash basin, white flat back, size 550 x 400 mm including CP waste coupling ,waste pipe, brackets etc complete all as specified.

S&F in repairs of Pillar taps 15 mm dia, cast copper alloy, with capstan heads, chromium plated fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as specified and directed.

S&F in repair of concealed stop cock/angle cock of 15mm dia chromium plated complete all as specified.

S&F in repair of towel rail 600mm long "D" type Brass chromium plated fixed with suitable steel screw etc complete all as specified and directed.

S&F in repair of Soap dish, any type, brass chromium plated fixed to plugs with chromium plated brass screws all as specified and directed

S&F 32 mm thick vaccum infused toughened Glass (12+12+8) mm to be fixed in framed opening with suitable epoxy adhesive and closing of all sides with epoxy sealant of approved make incl all necessary scaffolding complete as specidied by Engineer-in-charge.

S&F of Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e with in 20mm of the length indicated) confirming to Fe 410-W (Gd E-250) Quality-B etc all as specified and directed

M&L for pressed precast concrete interlocking paver block any shape and size conforming to IS 15658 - 2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 40 mm thick(Avge)and including required sand cushing, sealing the edges complete all as specified and directed by Engr in-Charge.

SCHEDULE A E/M PART: Point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable with earth continuty conductor of 1.5 sqmm PVC insulated copper conductor in and including rigid PVC conduit of suitable size with accessories fixed to the surface of the roof/ walls etc., Including terminal boxes made out of 1.6mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches, sockets, regulators etc for :-

(a) One fan point / light point controlled by one piano switch

Supply and fixing switch piano flush button single pole one way 5 Amp complete all as specified.

M & L for Ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts ISI marked complete all as directed

S&F surface mounted type LED tube light fitting 1 x 20 watts LED industrial batten type including LED tubes complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified. CG Cat No. LCTLN-20 -CDL or equivalant of Philips/Bajaj/Havells

S & F DB with sheet metal enclosure 240 volts, 4 way Single phase double door with copper bus bar neutral link, earth link, earthing studs, without MCBs complete. Distribution Board shall be fitted out side of the explosive store complete all as directed.

S & F MCB SPN of 240 Volts, AC, 50 Hz of capacity 6-32 Amp 10 KA complete all as specified and directed.

S&F MCB 'C' series SP 6-32 Amps rating, 10 KA breaking capacity, 240V, 50Hz, AC supply, complete all as specified and directed.

M&L for Sub Main wiring with 2 runs of FRLS grade 1100 volt unsheathed PVC insulated cable of single core 2.5sq mm (nominal area) multi-stranded copper conductor drawn through and including PVC Casing and caping of suitable size (ISI marked) incl all specials like joint elbow, Tee, junction , bend etc and provision of one runs of FRLS grade 1100 V rated PVC insulated multistranded copper conductor single core 2.5sq mm for earth continuity all as directed.

Note (I): Necessary M.S junction boxes for inspection as required on site/directed by Engr-in-charge, shall deemed to be included in the quoted rate.

(II) Three runs of wire and one run of conduit with necessary accessories will be measured as one unit length.

(III) The wiring shall be done strictly by IS Standards.

S & F exhaust fan with plastic body 250 mm sweep, 1440 RPM, Heavy duty single phase 240 Volts, AC 50 Hz and connecting up including louvers and making good with matching colour with the surroundings provision of cable 3 core of size 0.5 Sqmm (16/0.2 mm) from ceiling rose to fan , including making necessary opening on stone /brick masonry wall and all as specified and as directed.

S & F of 2 AC Timer Change over switch for ACs installed at AFNET Eqpt complete all as specified and as directed. Make : Dynamic, Model DIGI 2017 or equivalanet of Siemens ,C&S,L&T,Havells

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5 TR complete all as specifed and as directed by Engineer-in-Charge Make:Voltas/Bluestar/Carrier/LG/Hitachi/Godrej

S & F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 130 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% , load capacity 12 Amps and suitable capacity for 1.5Ton A/C complete all as specifed and as directed by Engineer-in-Charge. Make: V Guard/Aplab/Microtech/Andrew Yule/Sinetrac

S & F refrigent copper pipes for suction and discharge lines for connection of indoor to outdoor units of 1.5 Ton split AC of standard size as per OEM recommendation with proper insulation including fixing arrangement with powder coated MS clamps and jointing of pipe etc., complete all as specifed and as directed by Engineer-in-Charge.

S&F modular type motor starter, 25 Amps for split type air conditioners 1.5/2.0 Ton including cover plate and PVC surface box of suitable type complete all as specifed and as directed by Engineer-in-Charge.

M&L for rigid PVC conduit (medium grade) size 25 mm dia including fittings such as elbow, bend & tee etc. for water drain out line for AC, laid on walls/floors with clamping/fixing materials complete all as specifed and as directed by Engineer-in-Charge.

S & F socket of 32A, 2 pole and earth terminal indoor type wall socket, with DIN rail, IP 44 including all fixing accessories etc and with one MCB SPN 32 Amp, 240V, 50 Hz, AC and including 01 No 32 Amps, 2P + E Plug Sockets complete enclosed in thermo plastic enclosure all as specified and as all as directed.

S & F Sheet metal enclosure double door MCB DB SPN 8 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 2.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, 2.5 sqmm PVC insulated copper earth continuity conductor and including rigid PVC Casing & Caping of suitable size with accessories fixed in stone wall etc., Including terminal boxes made out of 1.2mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated Bakelite sheet for housing switches, for 6 pin 15 Amps socket out controlled by 15 Amps switch all as specified and directed

S & F switch socket combination 5 A/ 15 Amps 5 in 1, multipurpose flush type, ISI marked complete all as specified and as directed.

M&L for Sub Main wiring with 2 runs of FRLS grade 1100 volt unsheathed PVC insulated cable of single core 6sq mm (nominal area) multi-stranded copper conductor drawn through and including PVC Cassing& Capping accesseries of suitable size (ISI marked) incl all specials like joint elbow, Tee, junction , bend etc and provision of one runs of FRLS grade 1100 V rated PVC insulated multistranded copper conductor single core 6sq mm for earth continuity all as directed.

Note (I): Necessary M.S junction boxes for inspection as required on site/directed by Engr-in-charge, shall deemed to be included in the quoted rate.

(II) Three runs of wire and one run of Cassing & Capping with necessary accessories will be measured as one unit length.

(III) The wiring shall be done strictly by following proper colour coding AS per IS standerds

S & Fstar rated Open well Type three phase Submersible Pump Sets of capacity 3HP having suction line 50 mm and discharge line 40mm including necessary connection with existing pipe lines complete all as specified and as directed. Make : Kirloskar (Model No KOS-335+ Code No D12310300551) or equivalent in CRI/Crompton/KSB/Calama/Modi Atlanta

S & F star rated Open well Type three phase Submersible Pump Sets of capacity 2HP having suction line 50 mm and discharge line 40mm including necessary connection with existing pipe lines complete all as specified and as directed. Make : Kirloskar (Model No KOS-235M Code No D12380206251) or equivalent in CRI/Crompton/KSB/Calama/Modi/Atlanta

Supply ,fix, connect and test DOL starter type MK-1 with sheet steel enclosures, 3 phase, 415 volts, 50 Hz suitable for motor out put of upto 3 HP capacity complete all as specified and as directed.Make:CG/L&T/Havells/C&S/ABB/Legrand

S & F GI tubing medium grade of 50mm bore including necessary fittings laid in trenches or walls,floors,ceiling etc complete all as specified

All as per Sl. item No. 80 above but 40 mm bore

All as per Sl. item No.80 above but 25 mm bore

S & F Gun metal globe/gate valve of size 25 mm with iron wheel head, screwed with ends for iron pipe ISI marked complete all as specified and directed by Engr-in-Charge

M&L for Point wiring complete with 1.5 sqmm single core FRLS grade 1100 V PVC insulated unsheathed wire with multi stranded copper conductor drawn through in and including PVC cassing & capping and accessories ISI marked fixed surface on wall / ceiling/ roof etc and including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS ISI marked as earth continuity conductor etc, complete all as specified

(a) One fan point / light point controlled by one piano switch

M/s RAMA LAKSHMI CONSTRUCTIONS