Maintenance and Repair works to the AB - Health and Wellness centre ( Meenatchi hospital) at Bharathi park road 2 in Ramalingam colony in ward No 69, Central Zone.

Clearing Heavy jungle earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification.

Supplying and fixing in position white glazed Orrisa pattern Indian water closet of size 580x440mm, P or S trap of approved quality confirming to IS 2556 - part XI with sand cushion and forming flooring all-round the closet using 40mm broken brick jelly in lime concrete 1:2:5 mix, to 100 mm thick and finishing the top to required slope including giving necessary connection to soil pipes and supplying and fixing 10 litre low level PVC flushing tank with fittings, MS brackets, 32mm dia meter flush pipe with fittings and clamps including painting brackets, dismantling wherever necessary and redoing complete.

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and labour charges etc., as per standard specification - 1m3

Special Ceiling Plastering and finishing all the RCC exposed surfaces such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (one cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc complete complying with standard specification.

Plastering with cement mortar 1:5(one cement and five sand) 12mm thick in all floors complying with standard specifications.

Flooring finishing with ceramaic tiles (Anti Skid) of size 30cm X 30cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete and including necessary plaster of paris putty wherever required - 1 m2

Painting with best synthetic enamel paint of approved Colour and high qualitytwo coats toIron works etc,m, complete complying with standard specifications

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) sd 18

Wiring with 2 x 4 sq.mm. (56/0.3mm) PVC insulated single core unsheathed copper cable conductor cable of 1100V grade suitable heavy gauge pvc conduit pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour with continuous earth wire connection14 SWG TC wire for open power plug point.sd 41

Cement concrete 1:4:8 mix ( One Cement, Four Sand , Eight Aggregate)using 40mm size HBG metal from approved quarry including mixing, laying, compacting, curing and all labour charges Complying with Standard Specification etc. complete

Supply and fixing of single box type 20w LED light flu fitting complete on wall of ceiling etc., complete as per direction of departmental officers.

supply and fixing of 1200 mm (48”) Sweep AC Ceiling fan complete with stepped electronic 300 W regulator with 1 metre down road with fan clamp (18”)

Supply and Fixing of 40watts Street light (Philips/Bajaj/Crompton/K.Lite) suitable for clamp gi pipe fittings complete as per direction of departmental officers. M-1291

Supply and Run of 2 of 4 sq.mm PVC insulated SC unsheathed FRLS copper Conductor of 1100V grade in suitable heavy gauge PVC coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour.sd 44

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation:

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts and washers including allmaterials and labour charges etc complete - 10m2

Providing Auger Pile foundation of size 300mmdia using augur including labourchargesandall other toolsand plants charges etc. , asper directionof dept officers

Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Supply and erecting shuttering including necessary supports for plane urfacessuchas RCC column, footing, plinthbeam, stair caseetc.,in all floors using mildsteel sheets of 90cmX 60cmand 10 gauge stiffene dwith weldedmild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard Specification and asdirected. Sl.No.122

R.C.C. 1:1.5:3 Mix (One cement one point sand Three hard broken granite stones) for all the reinforced cement concrete works using 20mm gauge hard blue granite stone jelly including cost and conveyance of all materials to site including all labour charges for concrete mixing, laying, watering curing properly excluding cost of steel and centering etc., complete

Supplying, fabrication and placing in position of steel reinforcement using mild steel of Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wore and all labour charges

Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covered with 18 gauge M.S. sheet with necessary hinges, tower bolts, aldrop length 30mm and hold fast etc., complete with one coat red oxideprimer.

SUPPLY & INSTALLATION OF AIR-CONDITIONER 1.5 TR Split Type AC Unit - 3 Star Rated WITH COPPER COIL as directed by the departmental officers and complying with standard specification. M-1986

SUPPLY of PVC pipes and specials

110mm dia PVC pipe 6ksc

110mm dia pvc elbow

110mm dia pvc bend

110mm dia pvc tee

pvc solution (100ml)