Repairs/renovation/upgradation of existing Type II and Type III Quarters (10 number each) under Justified Works and Services (JWS) CSPS-2024 at CSIR colony Nirala Nagar Lucknow.

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

of area 3 sq. metres and below.

of area beyond 3 sq. metres.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dismantling GI pipes ( external work ) including excavation and refilling trenches after taking out the pipes , mannually by machanical means including stacking of pipes within 50metres lead as per direction Engineer in charge. 15mm to 40 mm nominal bore

Dismantling of flushing cistern/wash basin /EWC /Indian pot /Sink of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Dismantling of existing Kota Stone flooring/skirting including removal of unserviceable material up to dumping ground within a lead of 50 mtr. as directed.

Dismantling of existing water proof membrane/tarfelts including cleaning the surface and disposal the same up to dumping ground within 50m lead as directed.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia & length ( hold fast lugs or dash fastener shall be paid for seperately ) : Kiln seasoned and chemically treated hollock wood

12mm cement plaster of mix: 1:4 (1 cement :4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 coarse sand).

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead. With cement mortar 1:4 (1cement :4 coarse sand)

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for lift lobby cladding, kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over .50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile upto 600x600mm

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (600X450MM) OR AS PER EIC.

Providing and laying Ceramic glazed floor tiles upto size 450x450 mm(digital printed) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked stainless steel but hinges with necessary screws :

Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (overall area of door shutter to be measured)

Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing wire gauge shutters in door, windows, clerestory window in existing pattern and design using stainless steel grade 304 wire gauge with wire of dia 0.56 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: 35 mm thick shutter using. Teak Wood.

Providing and fixing door window/clerestory window glazed shutter in existing pattern & design using 4mm thick frosted glass panes i/c ISI marked M.S. pressed butt hinges bright finished of reqd. size with necessary screws: Teak wood 35mm.

Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing and fixing bright finished brass hard drawn hooks and eyes: 250 mm

Supply, fabrication & fixing in position wooden cupboard shutter under kitchen platform of size 3.00 (L) x0.75m (D) x0.75m (Ht.) Approx. made out of Malaysia sal wood frame of section 65x40mm and shutter of commercial board 19mm century sainik/Archid or eqvt. make fixed/screwed in proper position divided in five parts with vertical sal wood members and board of same size & one Horizontal shelf with same board of same size in one parts of cup-board. In central parts a provision of one drawer will also be made will same boards with runners etc. complete. The front shutter shall be provided with 1mm thick Marino/Century or eqvt. make mica pasted over board and hinged with parliamentary hinges of full ht. With teak wood lipping on edges of shutter complete including all fittings such as chapka magnet wooden knobs. The entire assembly shall be painted with syn. enamel paint over a coat of primer on exposed wooden surface in desired shade. The job will be completed to entire satisfaction of Engineer-In-charge (Front area will be measured for payment.)

Supply, fabrication and erection of wooden racks over kitchen platform of size 2.44m (L) x0.30m (d)x0.60(ht.) (approx) with 19mm thick commercial board Century sainik/archid or eqvt. make. The rack will be divided in three equal parts vertically and two equal parts horizontally with same board the shutter will be hinged by means of parliamentary hinges complete with teak wood lipping i/c fittings such as aluminum chapka, wooden knob, clip in each shutter. The frontage shall be glued over board with 1mm thick mica Marino/Century make in approved shade. The entire paint of desired/matching shade over primer complete. The job will be completed to entire satisfaction of Engineer-In-Charge. (Front area will be measured for payment).

Supply and fabrication of wooden cupboards of size 900x2100mm and 600mm deep made out of commercial board 19mm thick Centaury Sanik /Archid/Greenlam or eqvt make except back which will be 12mm commercial ply Centaury Sanik /Archid/Greenlam or eqvt make having two nos intermediate shelf of same material with side hinged double leaf shutter. One no 25mm dia SS rod will also be provided for hanging of cloth. The outer sides and shutters will be finished with 1mm thick laminate of required shade and inner sides and shelfs both faces bo will be provided with enamel paint of required shade over wood primer. The Looking Glass mirror 5mm thick including grindening & polishing of edges etc. Size 375x1200 mm will also be provided on outer face of almirah door shutter. The job includes all fitting such as hydraulic hinges, SS handles, magnet, cupboard lock and T&P etc complete.

Providing and fixing SS door handles, ISI marked, transparent or dyed to required colour or shade, with necessary screws etc. Complete up to size :150 mm

Providing and fixing SS Sliding door bolt for doors All complete as per direction of EIC. Size 250x16mm

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes , having thermal stability for hot and cold water supply , including all CPVC plain & threaded fittings , i/c fixing the pipe with clamps at 1m spacing . This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work , including cutting chasis and making good the walls etc .

20mm nominal bore outer dia pipe

32mm nominal bore outer dia pipe

Providing, laying and jointing of following size PVC drainage pipe 6 Kg. pressure Suprim/ Kisan Chaudhary or eqvt. make and providing and laying cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate) 750mm all round PVC pipe including necessary excavation fitting, jointing, refilling etc. complete:

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white counter wash basin (Perryware) of size 555x450x205mm including fixing with CP pillar cock CP waste coupling PVC waste pipe including cutting of walls providing clamp and fixing etc complete.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms:15 mm nominal bore.

Providing and fixing CP Brass Wash basin Mixer complete: 15 mm nominal dia

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia

Providing and fixing 8mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S triangular plate to european type W.C. of Quality and make as approved by Engineer-in-charge.

Providing and fixing CP brass toilet paper holder

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

(a) Single tee with door:110x110x110 mm

(b) Bend 87.5°: 110 mm bend.

(c) Shoe (Plain):110 mm Shoe.

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter .

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing fixing CP brass Swan neck tap Vijay or eqvt. approved make heavy quality weight not less than 1.6 Kg complete.

Providing fixing CP brass two way angle valve of approved make heavy quality complete.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore.

Providing and placing polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore.

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameter.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand).

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: 3 mm thick.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin- charge complete. 205 X 19 mm.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos emulsifiable concentrate of 20%.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti - termite treatment :

(a) Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos E.C. 20% with 1% concentration.

(b) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration.

(c) Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos E.C. 20% with 1% concentration.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre.

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Carriage of material by mechanical transport including loading, unloading and stacking out side municipal limits upto lead of 15 KM . Lime, morum, building rubbish.

Supplying and fixing following size/ modules, GI/PVC box alongwith modular base & cover plate for modular switches in recess etc. as required.

2Module (75mmX75mm)

3 Module (100mmX75mm)

8 Module (125mmX125mm)

6 Module (200mmX75mm)

12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single Pole

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(one earthing for 5 Quartor))

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing of following ways single pole and neutral sheet steel,MCB distribution board ,240 v,on surfacerecess,complete with tinned copper bus bar ,neutral bus bar ,earth bar ,din bar ,interconnections ,powder painted including earthing etc.as required.(But without MCB/RCCB/Isolator)

8 way (4+24),Double door

Supply And Fixing of Isolator 63 amp DP

Supply And Fixing of Bell switch with box

Supply And Fixing of Call Bell

Supply And Fixing of ceiling Rose

Supply And Fixing of LED Bulb 14 watt

PVC round sheet

Supply & Fixing of 50 Watt Ceiling Fan MAKE - Havells/Orient/ CG/Anchor

Supply& Fixing of 15 inch Exhaust Fan MAKE - Havells/ CG/ Anchor /Champion

Supply and fixing of LED tubelight fitting 20 watt

Supply and fixing of Button Modular Holder

Dismentaling of old electrical system and buy back of old scraps materials.

Note:-Rates should be quoted inclusive of all Taxes, GST @ 18% etc.

BHOJPUR CONSTRUCTION (BID ID -860025)

M/s MANOJ MISRA (BID ID -858323)