Construction of Separate toilet facility for Womens Police Personnel at DPL Ganderbal and P S Ganderbal

Amount

Earthwork in excavation by manual means in trenches for foundation, drains, pipes, cables’ etc (not exceeding 1.5 M, in width)and for shafts, wells, cesspits and the like not exceeding 10Sqm on plan, depth up to 1.5M including disposal of excavated earth up to 50mtrs from cutting edge, disposed earth is to be leveled and neatly dressed in all kinds of soil.

Providing and laying of stone soling hand packed dry including all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 fine sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 course sand : 6 stone agg. using 20mm nominal size) crushed including curing complete and all carriages and cost of materials involved.

Providing and laying Reinforced cement concrete work 1:1.5:3 ( 1 cement :1.5 course sand : 3 graded stone aggregate 20mm nominal size) in foundations, walls (any thickness) including attached plasters, buttresses, plinth and string courses, columns, pillars, piers, posts, struts, beams, suspended floors, landings, balconies, shelves, chajjas, lintels, bands, stair cases, spiral stair cases etc. up to floor V-level excluding cost of centering shuttering and finishing and reinforcement including all carriages involved upto site of work complete.

Centering and shuttering including strutting, propping etc. and removal of form work for foundation footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting propping etc. and removal of form work in walls (any thickness) including attached plasters, buttresses, plinths, string courses.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically treated bars of grade Fe-500 D or more. Including all carriages and cost of material involved.

Providing and laying of Nallah Mukh stone boulders with maximum size of stone aggregate not exceeding 90mm including carriages of all materials with loading, unloading and stacking complete.

Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages and cost of materials involved upto site of work complete.

Providing & fixing factory made uPVC of desired colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frames, sash and mullion (wherever required extruded profiles duly reinforced with 1.60 +-0.2mmthick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (desired powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame & sash shall mitered cut & fusion welded including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame & adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size & of approved quality & including glazing, silicon filling all complete as per approved drawing & direction of engineer-in-charge.

15 mm cement plaster 1:6 (1cement: 6 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including all carriages and cost of material involved.

Preparing plastered surfaces with Cement based wall putty of approved brand and manufacture, on new surfaces including all carriages and cost of material involved.

Providing and applying water bound internal/ external emulsion paint of approved brand and manufacture to give an even shade including priming coat with cement primer (two or more coats) Excel or Apex including all necessary scaffolding etc.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coat applied @ 1.67 liter/ 1 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 Sqm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:13753 of minimum thickness 5mm of approved make like NITCO. ORIENT, SOMANY, KAJARIA or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slury @ 3:3 Kg per Sqm including pointing in white cement mixed with pigment of matching shade complete. including carriage of material.

Providing and fixing ceramic rectified floor tiles 300x300 mm (thickness to be specified by the manufactures) of Ist quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as white, ivory, grey, fume Red, brown laid on 20mm thick be bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete incl. all carriage and costs of material involved.

Providing and fixing of following size of PVC (Prince make) Fitting ISI Marked

100mm dia Door Tee

100mm dia Plain Bend

100mm dia Collar.

100mm dia P-Trap

100mm Door Bend

100mm dia Plain Tee

100mm PVC Prince Cliff

75mm dia Door Bend

75mm dia Door Tee

75mm dia Plain Bend

75mm dia Collar.

75mm dia Floor Trap.

75mm dia Plain Tee

75mm PVC Prince Cliff

75mm dia PVC Cowl Caps

50mm dia PVC Elbow

50mm dia PVC Tee

Providing and fixing of following size of PVC (Prince make) Pipe including C/O (B-Type, specified adhesive.

100mm dia Pipes PVC Prince.

75mm dia Pipes PVC Prince.

50mm dia Pipes PVC Prince.

Providing, laying and fixing heavy duty Glass Fibre reinforced PPR (Polypropylene Random- Copolymer) pipes & Fittings of approved quality with solvent weld socket joints and necessary (female Elbow fittings brass thread) such as sockets, back nuts, elbows, bends, tees, reducers, enlargers, plugs, clamps, Transition Bushing, unions etc. including necessary excavation, backfilling, fixing with clamps, drilling holes in walls, slabs, hydraulic testing complete job.

20mm dia

25mm dia

Supply, installation, testing and commissioning of gunmetal, male or female threaded isolation control valve (Ball Valve), of approved quality confirming to IS 778, PN 10, with necessary specials, unions, nipple etc., to complete the job.

20mm dia

25mm dia

Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.orrisa pattern including all carriages and cost of material involved.(580x440mm)

Providing and fixing of 32mm dia CP long bend for WC’s (Standard make)

Construction of brick masonry plate form for WC’s using 2nd class bricks in 1:6 mix including all carriages and cost of material involved.

Providing and fixing of low level PVC flushing cistern (8 to 10) liters capacity heavy (Standard make)

Providing and fixing of vitreous wash basin with MS brackets complete of standard make. (630x450)

Providing and fixing CP Wall Mixer with all accessories heavy (Standard make)

Providing and fixing CP short body Bib Cock heavy (Standard make)

Providing and fixing CP Angle valve (Standard make)

Providing and fixing CP single hole mixer for wash basin including cutting and making good the walls wherever required (Standard make)

Providing and fixing CP waste Coupling

Providing and fixing PVC Waste pipe

Providing and fixing of 6" geyser bolts of standard make

Providing and fixing CP Soap case.

Providing and fixing of CP Grating with Anti Cockroach trap below the grating hinge type.

Providing and fixing 15mm dia 2"- 3" long CP nipples.

Providing and fixing PVC connection pipe upto 24" long.

Providing and fixing CP Towel Rod

Providing and fixing CP Towel Ring

Providing and fixing CP cup

Providing and fixing looking Mirror (Belgium Type)

Providing and fixing of Steel Shelf of Suprior quality

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS license No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (sintex, electroplast, star, lotus or equivalent having valid ISI license. (Three layer)

Construction of Brick masonry manholes using 2nd class bricks in 1:6 mix including plastering /CI frame with cover, Complete Job of following sizes.

Providing, Installation, Commissioning and testing of Hot water heater Geyser of approved make like Venus, Jaguar, Racold or equivalent make including all necessary fittings complete.( 35 liters capacity)

Providing and laying of Pre Cast RCC Rings of 1 m dia including earth work excavation with cover complete Job.

Providing and fixing of PVC electric conduit as per required diameter and gauge within all floors including cost of all involved fan/ lighting junction boxes withal accessories complete Job.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required (Make of wire Polycab, Havells, KEL, ALBA as per approved make).

Supplying and fixing of suitable size G I Box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 A & 15/16 A Modular socket outlet and 15/16 A modular switch connections etc as required.

Supplying and fixing LED indicator on modular plate & switch box including connections the cost of modular plate etc as required.

Supplying and fixing of suitable size G I Box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A Modular socket outlet and 5/6 A modular switch connections etc as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (as per Schedule)Finolex/ Polycab/Havells/RR kabel/Anchor/ KEI make

2 x 2.5 Sq.mm + 1 x 2.5 Sq.mm (Modular plate, GI Box for sockets to be included)

2 x 4 Sq.mm + 1 x 4 Sq.mm earth wire

Providing, fixing, Installation and commissioning of following accessories including connections etc as required (Make L&T Modular entice series/ Eqv. As per Approved sample).

Bulk Head with 12 watt LED lamp

Ceiling Rose

Exhaust Fan 150mm, 5 blades (Crompton/ luminous or equivalent make)

6 Way double door SPN distribution board MCB Box

6-16-25 Amp SP MCB make Anchor or equivalent complete connections.

40 Amp DP MCB make Anchor/ equivalent complete connections.

12 w round LED concealed panel light including concealed Zinc coated Iron Box recessed in concrete (Syska/Jaguar/Havells/Eqv. As per approved sample)

LED Tube light 22 watt 4 feet long (Syska/Jaguar/ Havells/ Eqv. As per approved sample.

M/S YAFAS MANZOOR RAJA

MR. NADEEM BASHIR NAJAR