REPAIR/ REPLACEMENT OF DEFECTIVE ELECTRICAL ACCESSORIES AND TUBE LIGHTS AT TRAFFIC AND SECURITY LINES, SECTOR 29, CHANDIGARH.

DSR Item No. 1.15 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.

Group C

DSR Item No 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

DSR item No.1.23 Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 A switch

2 way 5/6 A. switch

15/16 amps switch

3 pin 5/6 A socket outlet

6 Pin 15/16 A. socket outlet

DSR item No.1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps switch

15/16 amps switch

3 pin 5/6 A socket outlet

6 Pin 15/16 A. socket outlet

DSR item No.1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

DSR Item No.1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Triple pole

Triple pole and neutral

DSR Item No. 2.16 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Supply and Erection of B.L. Holder of make Anchor Panta / Havells Reo/ Gold Medal Essenza ISI marked on existing Jn. Box / Wooden block including making connection etc as required.

Supply and Erection of electronic step type socket type fan regulator in existing B.L. Sheet including making connection and petty material reqd. to complete the job. The fan regulator should be of Anchor Panta / Havells Reo/ Gold Medal Essenza make only.

Supply & Erection of 3 mm thick white glazed bakelite sheet on existing M.S. box. The job includes the cost of sheet and making holes & cutting and fixing with screws as required to complete the job. The Bakelite sheet should be of make Super Hylam / Formica / GreenLam make only.

Supply & erection of Exhaust Fan (heavy duty motor with copper wound metallic body) following size complete with motor, metallic blades, double ball bearing with minimum power consumption, (As per Complete Item No. 12 of the DNIT).

Size 12” Sweep 900 RPM with louver of Havells make Turbo Force SP / Orient make Industrial Heavy Duty / Crompton make EXHD 300-6-1/ Bajaj make Supreme PLUS/ Usha make Turbo HDEF only.

DSR item no.8.16.3 LEDFlood powder coatedpressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt) Supplying,installation,Testing&CommissioningofFlood Light,powdercoatedpressuredie cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, (As per Complete Item No. 13 of the DNIT).

DSR item No.8.9.5 LEDBattenlight(Systemlumenefficacy≥105<120lm/Watt) Supplying, installation, Testing & Commissioning of LED surfacemounted Batten light of following body material and construction as per IS : 10322 withdriver(Replaceable) as per the requirementwith Driver efficiency >85%, (As per Complete Item No. 14 of the DNIT).

S/I/T/C of 1x18/20Watt. LED tube rod made of CRCA Sheet. The rod should be installed in the existing batten. The LED tube rod should be of same make as that of existing fitting. (As per Complete Item No. 15 of the DNIT).

DSR item No.8.7.10 LED Panel light 2’x2’ ft. (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft.,of following body material and construction as per IS: 10322withdriveraspertherequirementwithDriverefficiency>85%, (As per Complete Item No. 16 of the DNIT).

DSR item No.8.2.4 LED Down lighter (SMD Type) (System lumen efficacy ≥120 <135lm/Watt) Supplying,installation,Testing & Commissioning ofLEDRecessed/surfaceDownlighter(Round/square/ Rectangular) SMD typeof following body material with PMMAand prismatic diffuser and construction as per IS : 10322with driver as per the requirementwith Driver efficiency >85%, (As per Complete Item No. 17 of the DNIT).

Supply and Erection of LED Post Top Lantern fittings made of cast aluminium housing with power to be mounted on directly on inbuilt Heat sinks. A UV stabilized PC/PMMA diffuser is provided for Glare Free Lighting with high visual comfort to complete with Electronic LED Driver Power supply & related accessories with the following specifications to be installed on existing pole.

Please Enable Macros to View BoQ information