Construction and Digital experiences Work

Amount

Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be "tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special aluminium splines using clips provided by Armstrong and approved by the Engineer-in-Charge.

Installation: Install aluminium box section (provided by others) of section 50mm x 25mm or as approved by the Engineer-in-Charge on the solid wall horizontally using screws and plugs at spacing of 600mm centre to centre. Screw the aluminium extruded keel for channelled wood works provided by Armstrong over the lowest and second aluminium section at an on centre distance of 600mm. Place the inside clip on the groove end of the panel along the aluminium keel and then place the tongue end of the next panel. Continue installing rows of panels by inserting the tongue into groove of the earlier inserted panel and progressively installing inside clips into the next keel till the actual height is achieved. Finish off the edges using wooden moulding of matching colour (provided by others). Installation to be carried out by Armstrong Trained Installation Team and installation should be carried out as per Armstrong Recommended Procedure.

Supplying and fixing in position of Fully Calcium silicate HILUX Board Partition using alu box section and aluminium frame at an interval of 0.75m at the aluminium frame of size 63.50mm x38.10mmx 1.28mm,1.41mm @ 0.818kg/m with necessary 'L' Angles, screws, nails and fixed in the wall using drilling machine with neat straight alignments etc., after finishing the frame work and fixed with both side 12mm thick Hilux Board approved quality and ISI make with necessary screws nails, fevicol and necessary grooves as per instruction of the departmental officers and also cutting the partition for Electrical Switch box and AC Plug Box and telephone Box requirements and finally cleaning the wooden partition for both side with neat position etc. The partition both side should be finished with best wall putty and painting two coats of plastice emulsion paint over one coat of primer including preparation of surface etc. The rate is inclusive of cost of materials, labour charges aluminium frame work and partition work, transporting charges etc., complete as directed by the departmental officers. (The materials quality and colours are approved by the departmental Engineer before use of works)

Supplying and fixing Teak Wood frames for doors Windows and Ventilators using required MS angles, flats and rods of approved design and as directed by the departmental officers including cost of MS Grills, labour charges and cost of one coat of red oxide primer with labour charges for priming coat etc. complete complying with standard specifiction.

T.W Scantling below 3m & above 2m

Supplying and fixing in position of Teak wood door shutter using spl quality teak wood planks of 40 mm thick panelled doors with required raw materials, Brass hinges, Brass tower bolt,ornamental Brass handles, Door stopper, Door closer,Brass aldrops and bush with suitable locking arrangements etc. The rate should be inclusive of cost of materials, labour charges for wrought and put up the doors with kadasal charges and transporting charges etc complete complying with standard specification and as directed by the Departmental officers.

Polishing the teakwood panelled door with best melamine varnish finishing including labour charges for scrapping the existing T.W panelled throughly on both sides of the door, sand papering without affecting the teakwood plank grooves and natural design with preparation of surface using sand paper and finishing the smooth wooden surface and applying of melamine polishing on the teakwood panelled door/ partition surface using spray machine on uniform layer of smooth surface formed without any air bubbles after finishing the work etc., the rate inclusive of cost of materials ,labour charges ,transportion charges, labour for scrapping charges, etc complete complying with standard specification and as directed by the departmental officer (the materials quality are approved by the EE Before use of work.

Supplying, Fabricating and erecting in position Wooden platform of height 900mm made out of M.S Cubicular frame work made out of M.S Angles of size ISA 50x50x6mm @ 4.47 Kg/Rm for Verticals (4 Nos), Top and Bottom sections interconnected and stiffened with ISA 40X40X6mm (4 Nos) for the top frames and diagonals ISA 40x40x6mm (2 Nos) for each of the four sides. The top and external sides shall be covered with 19mm thick Marine plywood of approved brand and confirming to ISS. The exposed surface of the plywood. The rate shall be inclusive of cost of all materials, labour charges for fabrication,erection of the units in position to form the platform of required shape & size etc., The rate shall be inclusive of application of two coats of enamel paint of approved quality and shade for the M.S frame work and bottom surface of plywood board with suitable primer, The rate shall be inclusive of cost of fabrication, erection in position, charges for fixing plywood,Conveyance to work site, all labour charges ,Painting, finishing etc.,complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying and laying of 8mm thick Woven Carpet of approved make with new one of fixing in position of thick Carpet including thorough scrapping of the existing floor and applying pattis to bring the floors smooth surface and fixing the unitex sheet with good adhesive fevicol of SR 998 and pressing the sheet in the floor to the standard including the wastage of unitex processed and conveyance to the site etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supply & Installation of Projector - 14000 ANSI Lumens, DLP™ chip x 1, DLP™ projection system, Light source - Laser diodes, Laser Life - 20000hrs, Output resolution FULL HD (1920 x 1080), Dynamic Contrast ratio- 6000: 1, Optical Zoom lens, (Make-Christie/Panasonic/Barco or Equivalent brands). (Data-A1)

Supply & Installation of IR Emitter - Coverage Range: 25 m typical, Shuttering Frequency: 96 Hz, 100 Hz, 120 Hz, 144 Hz, 192 Hz and 240 Hz, Type of Synchronization: Inferred (IR). Make- Xpand or Equivalent brands (Data-A2)

Supply & configuration of active 3D Glass - Rechargeable Infrared Active Shutter Glass, IR sync, 48, 50, 60, 72 and 92 - 160 Hz frame rate, Shuttering Frequency: 96 Hz to 320 Hz. Make- Xpand or Equivalent brands (Data-A3)

Supply & Installation of Projection Screen- High Gain non perforated Screen, with wide viewing angle, Length – 42 feet, Height – 10 feet, The frame is made of mild steel (MS) pipe with a diameter of 50mm. Make- GTC or Equivalent brands (Data-A4)

Supply & laying of electrical wire (Data-A5)

Supply & laying of PVC Pipe (Data-A6)

Supply & laying of CAT 6 Cable (Data-A7)

Supply & Installation of Audio Video Receiver - 7.1 channel discrete power amplifier, 100W per channel (8 Ohm, 20Hz-20 kHz, THD: 0.08%, 2ch. drive), Power Output (6 ohm, 1 kHz, 10% 1ch Drive) 200 W, Multichannel Surround Technologies(DTS: DTS HD Master, DTS:X, DTS Neural:X, DTS Virtual:X, Dolby: Dolby TrueHD, Dolby Atmos, Dolby Atmos Height Virtualization, Dolby Atmos Music, Dolby Surround) Max Number of Processing (Preamp) Channels: 7.1 Multi Channel Preout, 8K/60Hz and 4K/120Hz pass-through support, Multichannel Surround Sound, - 7.1 channel Make - JBL, Yamaha, Denon or Equivalent brands (Data-A8)

Supply & Installation of Power Amplifire- Newly developed Class-D amplifier engine, Flexible onboard PEQ, crossover, filters, delay, and limiter functions, 500W x 2 at 8Ω / 800W x 2 at 4Ω, Make – QSC, Yamaha, Crown or Equivalent brands (Data-A9)

Supply & Installation of Main Speakers -500W Professional Grade 2-way Speaker, Bass-reflex, Frequency range (-10dB) - 49 Hz - 20 kHz, LF - 15" cone, Voice Coil: 2.5", HF - 1.4" driver,plywood cabinet, Make – QSC, Yamaha, Crown or Equivalent brands (Data-A10)

Supply & Installation of Sub woofer -500 W power capacity, 15 inch Driver, enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance, Frequency Range: (-10dB) 34 Hz - 250 Hz, Frequency Response: (±3 dB) 53 Hz - 250 Hz, Sensitivity (@1m): 98 dB SPL. Make – QSC, Yamaha, Crown or Equivalent brands (Data-A11)

Supply & Installation ofSurround Speakers -100W Professional Grade 2-way Speaker, Bass-reflex, Frequency range (-10dB) - 49 Hz - 20 kHz, LF - 10" cone, Voice Coil: 2.5", HF - 2" driver,plywood cabinet. Make – QSC, Yamaha, Crown or Equivalent brands (Data-A12)

Supply & Installation of Media Server - AMD Ryzen Threadripper PRO 5955WX (64 MB cache, 16 cores, 32 threads, 4.0GHz to 4.5GHz, 280 W), Windows 11 Pro,Precision 7865 Tower 1350W Chassis (WW 2SATA Flexbay L6), 64GB, 2x32GB, DDR4, 3200MHz, RDIMM ECC Memory, Dual NVIDIA® RTX™ A4000, 16 GB GDDR6, 4 DP, Internal M.2 SSD Boot with Dual SATA Flexbay, 500 GB, 7200 RPM, 2.5-inch, SATA, HDD, Make - Dell, HP, LENOVO or Equivalent brands (Data-A13)

Supply & Installation of Workstation – 12th Gen Intel® Core™ i5-12500 (18 MB cache, 6 cores, 12 threads, 3.00 GHz to 4.60 GHz Turbo, 65 W), Windows 11 Pro, English, 32 GB, 1 x 32 GB, DDR5, 512 GB, M.2 2280, PCIe NVMe, SSD, Class 40 & 3.5 inch 1TB 7200rpm Hard Disk Drive, 500 W internal power supply unit (PSU), Make - Dell, HP, LENOVO or Equivalent brands (Data-A14)

Supply & Installation of Custom-Designed Electronics, Programming Expert-Services, Installation and Software for managment services for the audio-visual theatre. Site Assessment - Evaluation of ambient light, seating arrangement, and architectural features that could impact the project. System Design - Creating a comprehensive plan for the system that details hardware and software requirements, room layout, projection mapping, and signal flow diagrams. This may also include 3D modelling of the space and system for visual representation. Equipment compatibility check - projectors, lenses, servers, and software based on the design plan. Acoustics and Lighting design - Providing recommendations on acoustics and lighting to ensure optimal viewing conditions, which may involve collaborating with audio and lighting experts. Installation Planning - Creating a detailed plan for the installation process, including scheduling and coordination with other trades, if needed. System Calibration- Aligning and calibrating the projectors for optimal image quality across the entire curved screen, including colour matching, focus, and edge blending.

Media Playback - This software would handle the actual playing of the 3D movie and synchronizing it across all the projectors. This enables seamless playback of multimedia content, includ-ing videos, images, animations, and audio files, on the 42-foot curved screen. It supports various file formats and codecs, ensuring compatibility and high-quality playback. Multi-Projection Mapping - The software provides advanced projection map-ping capabilities, allowing for precise alignment and blending of multiple projec-tors. It ensures a seamless and immersive visual experience by seamlessly stitching together projected images on the curved screen. Content Synchronization - This enables synchronization of multiple media cues, ensuring accurate timing and coordination between audio, video, and visual ef-fects. This feature guarantees smooth transitions and precise playback synchroni-zation for an immersive audience experience. Safety Measures - Ensuring all installations are up to code and in line with health and safety regulations.Motion-Base Design, Manifacturing & Installation at Site Motion Base Design - Expertise of mechanical engineers and motion control specialists to design a robust and stable 3 DOF

(degrees of freedom) (Heave-Pitch-Roll movements) motion base that can handle a 3000kg payload. Integration - Collaborate with experts in system integration to ensure seamless integration of the motion base with the overall audio visual setup. Special Effects - implementation of seat vibration, wind simulation, lightning effects, drizzle effects, and scent dispersion. Provide insights on the suitable equip-ment, installation, and control mechanisms to achieve realistic and synchronized effects. Testing and Calibration - Ensures the accuracy, reliability, and smooth operation of the system, including the desired displacement, speed, and synchronization with the audiovisual content and special effects. Nessesarry software programming to run the 7D simulation Multimedia Playback Software: This software would handle the actual playing of the 3D movie and synchronizing it across all the projectors. Motion-Base Control Software: This software would control the timing and intensity of the motion base in Heave-Pitch-Roll movements.Theater Effects Control Software: This software would control the timing and intensity of additional theater effects such as vibrations, wind, drizzle, lightning, and scent. (DATA-A15)

Supply of Multimedia content Stereoscopic 3D Movie Content (Deliverable): The stereoscopic 3D movie content will comprise a total of 36 minutes of 3D animated source contents each in 2K resolution. These contents will be seamlessly stitched together to form the final 6-minute stereo 3D movie that meets the technical requirements of 6K resolution of the final Stereo-3D projection harware-software system. The content will be distributed across three projectors, each projecting two streams (left and right stereo) for 6 minutes each. The specific breakdown is as follows: 1. Projector 1: • Left Stereo Stream: 2K 3D Animated Movie - 6 Minutes • Right Stereo Stream: 2K 3D Animated Movie - 6 Minutes 2. Projector 2: • Left Stereo Stream: 2K 3D Animated Movie - 6 Minutes • Right Stereo Stream: 2K 3D Animated Movie - 6 Minutes 3. Projector 3: • Left Stereo Stream: 2K 3D Animated Movie - 6 Minutes • Right Stereo Stream: 2K 3D Animated Movie - 6 Minutes

This content distribution allows for a high-quality, immersive viewing experience that enhances the depth and realism of the animation. The content development involves the below technical production processes A. Preproduction: 1. Research: Detailed study and understanding of the life and accomplishments of Leader Kalaignar to accurately represent them in the multimedia content. 2. Creative Scripting: Creating a captivating narrative that intertwines the elements of the leader's life and achievements. 3. Screenplay: Writing a dynamic script that will be used as a blueprint for the animated movie, including scene descriptions, character actions, and dialogue. 4. Direction: Planning and overseeing the entire production process to ensure the final product aligns with the envisioned concept. B. Production: 1. Drone mapping of Locations for photogrammetry 2. HQ 3D Modelling & Texturing of Environments & Architecture landscapes 3. HQ 3D Modelling & Texturing of Human Characters

4. Body rigging & Facial expression blend-shapes for Human-Characters 5. Body & Fingers motion capture & Primary/Secondary animatons for the Human-Characters 6. Facial Emotions, Expressions, Dialogue Lip-Synch motion capture and animaton for the Human-Character 7. Interation Animations & Collision dynamics Simulatons. 8. Physics based Simulatons of Dynamic-Effects (Water bodies, Wind, Fog, Rain, Weather conditons, Dramatc Sky/Clouds, Human-Hair etc 9. Cloth, Particle effects, Sprites…etc. 10. Creaton of Mate-Paintings 11. Stereo-3D VR Camera Rig set-up & Camera Animatons 12. Advanced Photoreal Lightng & Rendering of Stereo-3D Left & Right Streams C. Postproduction: 1. Editing: Refining the content for clarity, pacing, and visual appeal along with Post-Vfx, advanced transitions, compositing and title effects. 2. Stereo-3D Depth grading: Fine-tuning and adjusting the depth perception in the stereoscopic 3D content for an immersive visual experience

• Optimising the Depth-Scripts & Depth-Budgets allocatons while considering various Psychological/Physiological Human-Factors. • Scientfic calculaton of Parallax - Interaxial (IA). • Optimising the Scene Lightig & Textures to avoid Stereo Conflict issues. • Optmising Scenes to avoid Ghostng – Cross talks • Finding the Sweet-Spots for Camera Posittons, Angles & Movements which don’t cause Disorientaton to the users. • Grading of final S3D Movie with comfortable Dwell tme (The time for the Eyes & Brain to digest the scene in Stereo3D). • Depth continuity & Depth Ramping with consideraton for Convergence & Accommodaton (SAT - Senses Accommodaton Time).• Pseudo Stereo-3D compositing errors will be checked in every frame.• Most importantly S3D Hurt Index will be checked in every step. 3. Colour grading: Enhancing and adjusting the colours of the content to achieve a desired visual aesthetic and mood.4. Sound Design: Creating and incorporating sound effects, music, and dialogues to enhance the audience experience.5. Quality Assurance: Thoroughly checking and validating the multimedia content to ensure it meets the set quality standards. (DATA-A16)

Supply & Installation of 2.1 sound system Make - Sony, Philips, Jbl or Equivalent brands (Data-B1)

Supply & Installation of Holography Setup Conceptualization and Design - The experts will carefully plan and install the necessary equipment and infrastructure for the 3D holography setup. This includes positioning and calibrating the Life-Size Specialised Holographic Optics System at the optimal viewing height and angle. The team will also configure the necessary software and hardware components to enable the 3D holography functionality. Audio Setup - Audio requirements for the 3D holography experience. This may involve installing speakers, amplifiers, and configuring the audio system to ensure synchronized and immersive sound effects that enhance the overall visual presentation. Testing and Calibration - Once the installation is complete, the expert team will thoroughly test and calibrate the entire setup to ensure optimal performance and visual quality. This includes fine-tuning the holography display, audio synchronization and addressing any technical issues that may arise during the testing phase. (Data-B2)

Supply of Multimedia content & Software with 3D Holographic Content (Deliverable): The software integrated with rendered Holographic movie content comprising of Realistic Avatar Animation of Kalaignar for a total of 3 minutes. This content will be rendered in 4K resolution that meets the final technical requirements of the 3D Holographic hardware-software system for a high-quality, immersive viewing experience that enhances the depth and realism of the overall viewing experience. The content development involves the below technical production processes A. Preproduction:1. Research: Detailed study and understanding of the historical achievement of Leader Kalaignar to accurately represent him in the multimedia content. 2. Creative Scripting: Consolidating a captivating narrative that intertwines the elements of the leader's historic speech. 3. Screenplay: Writing a dynamic script that will be used as a blueprint for the animated movie, including character actions, and dialogue. 4. Direction: Planning and overseeing the entire production process to ensure the final product aligns with the envisioned concept.

B. Production: 1. HQ Graphical Avatar creation & with Realistic Textures 2. Body & Fingers motion capture with Primary/Secondary animations or RGB capture and Compositing in Vfx 3. Facial Emotions, Expressions, Dialogue Lip-Synch motion capture and animaton 4. Physics based Simulatons of Dynamic-Effects for Hair & Cloth as necessary 5. Holographic Camera Rig set-up 6. Advanced Photoreal Lighting & Rendering of the content for the 3D Holographic projection format

C. Postproduction: 1. Compositing & Editing: Refining the content for clarity, pacing, and visual appeal along with post-Vfx, and compositing. 2. Colour grading: Enhancing and adjusting the colours of the content to achieve a desired visual aesthetic and mood. 3. Sound Design: Creating and incorporating sound effects, music, and dialogues to enhance the audience experience. 4. Quality Assurance: Thoroughly checking and validating the multimedia content to ensure it meets the set quality standards. D. Software Interactive Play-Control Software: Development of software to control the hardware components and projection system of the pavilion with the user-friendly interface for Play-Control interaction with the holographic content. (Data-B3)

Supply & Installation of Projectors, 5000 Lumens , 3LCD, 3-chip technology, Resolution FULL HD 1920 X 1080, 3LCD interactive laser display, Finger touch Interactive, Ultra-short throw projection, 20,000-hours laser light source. Make-Panasonic/Epson/Christie or Equivalent brands (Data-C1)

Supply of Multimedia content & SoftwareThe final deliverable software for the interactive puzzle games will be a user-friendly application with visually appealing 2D animated graphics. It will feature intuitive navigation and engaging gameplay mechanics, allowing visitors to explore Kalaignar's life and achievements through intriguing riddle-like questions. The software will provide an immersive and educational digital experience, showcasing the contributions of Kalaignar in art, literature, cinema, and politics.

The content development involves the below technical production processes 1. Research and Conceptualization: o Conduct research on Kalaignar's life and achievements. o Brainstorm ideas for the interactive puzzle games and the overall user experience. 2. Storyboarding: o Create visual storyboards that outline the flow of the puzzle games. o Define the layout and composition of the UI elements in each puzzle. 3. Software Architecture: o Design the software architecture for the interactive touch screen application. o Determine the data structure and organization of the puzzle game content. 4. Gamification Components: o Design game mechanics and rules for the puzzle games. o Implement gamification elements. . Animation and Graphics: o Develop 2D animated graphics for the UI elements of the puzzle games. o Create visually appealing and interactive animations that engage users.

6. Software Development: o Develop the software application for the interactive touch screen. o Implement the UI elements, game mechanics, and interactive features. o Integrate the multimedia content, including the 2D animated graphics. 7. Testing and Refinement: o Perform testing to ensure the functionality and usability of the interactive touch screen application. o Gather feedback and make necessary refinements to the UI/UX and gameplay elements. 8. Installation, Integration, and Commissioning: o Install and integrate the hardware components with the interactive touch screen application. o Perform comprehensive testing to ensure smooth operation and synchronization. o Commission the complete system for deployment and public use. (Data-C2)

Supply & Installation of ouch Monitor – 24" (60.96 cm) Touch Monitor, LED Backlight Technology, Anti-glare, 3H Hard Screen Coating, Full HD (1080p) 1920 x 1080 at 60 Hz, Viewing angle: 178° vertical / 178° horizontal, Aspect Ratio:16:9. Make - Dell, HP, LENOVO or Equivalent brands (Data-D1)

Supply & Installation of AR Selfie Studio Design -Design the layout and setup of the AR Selfie Studio, considering factors such as lighting, camera placement, and overall aesthetics. This ensures an optimal environment for capturing high-quality AR selfies. Hardware Design - Design the hardware required for the AR Selfie system. This includes components like DSLR Camera 24 MP (Canon, Nikon or Panasonic Camcorder or Equivalent brands), camera mounts, adjustable lighting fixtures, and any other mechanical or electronic elements necessary for the setup. Installation Services - AR Selfie Studio Setup- Our technicians will install and configure all the necessary equipment and components for the AR Selfie Studio. This includes mounting cameras, setting up lighting fixtures, integrating the touch screen, and ensuring proper connectivity between the devices (Data-D2)

Supply of Multimedia content & SoftwareThe final deliverable software for the interactive AR photo experience will be a user-friendly application that combines Augmented Reality (AR) technology, integrated mobile sharing, and seamless integration of the museum logo and time/date stamping. The content development involves the below technical production processes 1. Research and Conceptualization: Conduct research on Kalaignar's room and design a concept for the AR photo experience, incorporating mobile sharing and logo/time/date stamping. 2. The software architecture for the interactive AR photo experience development will be designed to ensure seamless integration of various components and functionalities. It will consist of different modules and layers to handle different aspects of the application. a) User Interface Layer: This layer will focus on the design and presentation of the application's interface. It will provide an intuitive and user-friendly interface for visitors to interact with the AR photo experience, enter their mobile phone numbers, and initiate the photo capture process.

b) Augmented Reality (AR) Layer: This layer will incorporate AR technology to overlay the augmented avatar of Kalaignar onto the empty chair in real-time. c) Mobile Sharing and Communication Layer: This layer will handle the mobile sharing functionality. It will provide a seamless integration with the mobile network, allowing visitors to enter their phone numbers and receive the photo directly on their devices. It will ensure secure and efficient communication between the application and the mobile network to facilitate photo sharing. d) Logo and Time/Date Stamping Integration Layer: This layer will integrate the museum logo and time/date stamping functionality into the final photo. It will ensure that the logo and timestamp are properly displayed on the photo, adding authenticity and a sense of time to the captured memory. e) Backend and Database Layer: This layer will handle the backend processes, including data storage, retrieval, and management. It will store visitor information, phone numbers, and the captured photos securely. The backend layer will ensure smooth data flow and efficient processing for a seamless user experience.

The software architecture will follow industry best practices, employing modular and scalable design principles. It will be built using appropriate programming languages, frameworks, and technologies to ensure stability, performance, and reliability. Extensive testing and quality assurance measures will be implemented throughout the development process to ensure a robust and error-free application. 3. Testing and Refinement: Thoroughly test the application, ensuring smooth functionality, accurate AR rendering, seamless mobile sharing, and proper integration of logo and time/date stamping. 4. Installation and Commissioning: Install and integrate the hardware components, including the interactive touch display, and commission the complete system for public use. (Data-D3)

Supply & Installation of Projectors - 6000 TO 9000 ANSI Lumens, DLP™ chip x 1, DLP™ projection system, Light source - Laser diodes, Laser Life - 20000hrs, Output resolution FULL HD (1920 x 1080), Dynamic Contrast ratio- 6000: 1, Optical Zoom lens, Make-Panasonic/Digital projection /Christie or Equivalent brands (Data-E1)

Supply & Installation of Projection Screen- High Gain non perforated Screen, with wide viewing angle, Length –60 feet, Height – 10 feet, The frame is made of mild steel (MS) pipe with a diameter of 50mm. (Data-E2)

Supply & Installation of Media Server - AMD Ryzen Threadripper PRO 5955WX (64 MB cache, 16 cores, 32 threads, 4.0GHz to 4.5GHz, 280 W), Windows 11 Pro,Precision 7865 Tower 1350W Chassis (WW 2SATA Flexbay L6), 64GB, 2x32GB, DDR4, 3200MHz, RDIMM ECC Memory, Dual NVIDIA® RTX™ A4000, 16 GB GDDR6, 4 DP, Internal M.2 SSD Boot with Dual SATA Flexbay, 500 GB, 7200 RPM, 2.5-inch, SATA, HDD, Make - Dell, HP, LENOVO or Equivalent brands (Data-E3)

Supply & Installation of Audio Video Receiver - 7.1 channel discrete power amplifier, 100W per channel (8 Ohm, 20Hz-20 kHz, THD: 0.08%, 2ch. drive), Power Output (6 ohm, 1 kHz, 10% 1ch Drive) 200 W, Multichannel Surround Technologies(DTS: DTS HD Master, DTS:X, DTS Neural:X, DTS Virtual:X, Dolby: Dolby TrueHD, Dolby Atmos, Dolby Atmos Height Virtualization, Dolby Atmos Music, Dolby Surround) Max Number of Processing (Preamp) Channels: 7.1 Multi Channel Preout, 8K/60Hz and 4K/120Hz pass-through support, Multichannel Surround Sound,- 7.1 channel Make - JBL, Yamaha, Denon or Equivalent brands (Data-E4)

Supply & Installation of Audio Power Amplifire- Newly developed Class-D amplifier engine, Flexible onboard PEQ, crossover, filters, delay, and limiter functions, 500W x 2 at 8Ω / 800W x 2 at 4Ω, Make – QSC, Yamaha, Crown or Equivalent brands (Data-E5)

Supply & Installation of Main Speakers -800W Professional Grade 2-way Speaker, Bass-reflex, Frequency range (-10dB) - 49 Hz - 20 kHz, LF - 15" cone, Voice Coil: 2.5", HF - 1.4" driver,plywood cabinet, Make – QSC, Yamaha, Crown or Equivalent brands (Data-E6)

Supply & Installation of Sub woofer -800 W power capacity, 18 inch Driver, enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance, Frequency Range: (-10dB) 34 Hz - 250 Hz, Frequency Response: (±3 dB) 53 Hz - 250 Hz, Sensitivity (@1m): 98 dB SPL. Make – QSC, Yamaha, Crown or Equivalent brands (Data-E7)

Supply & Installation of Surround Speakers -100W Professional Grade 2-way Speaker, Bass-reflex, Frequency range (-10dB) - 49 Hz - 20 kHz, LF - 10" cone, Voice Coil: 2.5", HF - 2" driver,plywood cabinet. Make – QSC, Yamaha, 18-Sound or Equivalent brands (Data-E8)

Supply & Installation of Designed Electronics, Programming Expert-Services, Installation and Software for management services for the audio-visual theatre Site Assessment Evaluation of ambient light, seating arrangement, and architectural features that could impact the project. System Design - Creating a comprehensive plan for the system that details hardware and software requirements, room layout, projection mapping, and signal flow diagrams. This may also include 3D modelling of the space and system for visual representation. Equipment compatibility check - projectors, lenses, servers, and software based on the design plan. Acoustics and Lighting design - Providing recommendations on acoustics and lighting to ensure optimal viewing conditions, which may involve collaborating with audio and lighting experts. Installation Planning - Creating a detailed plan for the installation process, including scheduling and coordination with other trades, if needed. System Calibration- Aligning and calibrating the projectors for optimal image quality across the entire curved screen, including colour matching, focus, and edge blending. Media Playback -

This software would handle the actual playing of the 3D movie and synchronizing it across all the projectors. This enables seamless playback of multimedia content, including videos, images, animations, and audio files, on the 60-foot curved screen. It supports various file formats and codecs, ensuring compatibility and high-quality playback. Multi-Projection Mapping - The software provides advanced projection map-ping capabilities, allowing for precise alignment and blending of multiple projec-tors. This enables seamless playback of multimedia content, including videos, images, animations, and audio files, on the 60-foot curved screen. It supports various file formats and codecs, ensuring compatibility and high-quality playback. Multi-Projection Mapping -

This includes speaker placement, sound treatment considerations, and wiring diagrams. Sound Calibration - Tuning the sound system for optimal audio performance across the entire space. This involves balancing leveJob, adjusting delays, and fine-tuning equalization. Acoustic Treatment – Providing any acoustic treatment in the space, such as diffusers or bass traps, to reduce echo or improve sound quality. Integration of Audio and Visual Systems - Ensuring seamless integration of the audio and visual systems, which may involve synchronizing audio and video signaJob and managing control systems that operate both. Powerful multi-display production and presentation software that allows users to create stunning collages combining images & video. It supports projectors for large, seamless images and can be hooked up to monitors, LED walJob or other creative screen arrangements. The software aJobo has 3D video mapping capabilities that allow users to project onto complex three-dimensional objects. With its comprehensive set of features and user-friendly interface, this software is an ideal solution for creating immersive multimedia experiences in a variety of settings. (DATA-E9)

GST at 18%

CMK Projects Private Ltd.,