Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹74.5 LAccepted-Finance 0 BAROO BAROO KARGIL KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | 1st | Accepted-Finance Admitted | |
| 2 | 2nd₹76.5 L+₹2.0 L (2.68%)Accepted-Finance | 2nd | Accepted-Finance Admitted | |
| 3 | 3rd₹80.3 L+₹5.8 L (7.75%)Accepted-Finance | 3rd | Accepted-Finance Admitted | |
| 4 | 4th₹81.5 L+₹7.0 L (9.38%)Accepted-Finance | 4th | Accepted-Finance Admitted | |
| 5 | 5th₹83.7 L+₹9.2 L (12.3%)Accepted-Finance R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | 5th | Accepted-Finance Admitted |
Tender Value
₹96.5 L
EMD Value
₹1.9 L
Closing Date
28 Jun 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer Igoo Phey Div Leh
Office of the Executive Engineer Igoo Phey Div Leh
Construction of Office Complex at Housing Colony Leh.(Under Distt. Plan)
2022_PWD_6668_1
E-Tender - 29 of Igo Phey of 2022-23
Open Tender
Civil Works - Others
Item Rate
270 days
leh
Please refer Tender documents.
4 documents required · 4 mandatory
₹2,000
Executive Engineer Igo phey div leh
₹1.9 L
8 Jul 2022
8 Jun 2022
30 Jun 2022
8 Jun 2022
28 Jun 2022
8 Jun 2022
90 days
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 25 meter beyond 1 m from cutting edge. All kinds of soil.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Dumping of stone excluding the cost of stone in horizontal on level.
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) Quarry
Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.Second kail wood 35mm thick
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second kail wood 35mm thick
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 12823 marked
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete
Centering and shuttering including strutting, propping etc. and removal of form work for: a) Foundations, footings, bases for columns
b) Suspended floors, roofs, landings, balconies and access platforms.
c) Columns, pillars, piers, abutments, posts and struts.
d) Lintel, beams, plinth beams, girders, bressumers and cantilevers
e) Edges of slabs and breaks in floors and walls Under 20 cm wide
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. A) 200x10 mm
Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. A) 125mm
Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Single rubber stopper
Providing and Fixing of Traditional Ornamental Shingstak including carriage complete job
Providing and Laying with 40mm thick imprevious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS:12432 pt III (density of foam being 40-45kg/cum) over a coat of polyurethane primer applied @6-8 sqm per litre, laying 400 G polythene sheet over PUF Spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1:cement: 2 coarse sand: 4 stone sggregate 20mm nominal size) in chequerred rough finish, in panels of 2.5mm x 2.5mm and embedding with 24 G wire netting and selling the joints with polymerized mastic, all complete as per direction of Engineer- in- charge.
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc.complete as per the architectural drawings and the directions of engineer in-charge. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
Carriage of material by Mechanical Transport including loading, unloading and stacking complete job.a) Cement/Steel an avg lead 2Km
b) Sand an avg lead 15Km
c) Stone agg. below an avg lead 15Km
d) Soling Stone an avg lead 15Km
e) Stone an avg lead 25Km
M/S ZAHID ALI
M/S MUNEER HASSAN AKHON
M/S GHULAM MOHD SOFI
M/S SONAM ANGCHOK
M/S ABDUL HAKIM
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .