Construction of Lift Pit Installation of Lift EPBX System and Parking Tiles at State Guest House, Ranchi For the Year-2021-22

Amount

Dismentaling RCC work and disposal debries all complete as per approved design and per building specification and direction of E/I.

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Extra for earth work in hard soil as per specification and direction of E/I. (vide classfication of soil item - B)

Providing coarse clean sand in filling in foundation trenches or plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts includng cost of all materials, Labour, rotalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9" x 4.5" x 3") in C.M. (1:6) in superstructure with approved quality of clean sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Providing two coats of plastic emulsion paint of approved shade and make over new surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size). Lintel

Providing Toe steel reinforcement of 8mm dia to 10mm dia rods as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Granite stone slab colour black, Cherry/Ruby red

Supplying, fitting and fixing good quality, well dressed and well seasoned teak wood work in choukhats in doors, windows skylights, fanlights and C/W celetial windows openings, including wedge over all clamps complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/I.

Supplying, fitting & fixing 35mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneeres of standard makew with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.)

Carriage of Material

Bricks Lead = 8 km

Fly Ash Bricks Lead = 8 km

Sand lead = 8 km

Stone chips lead = 22 km

Local Sand lead = 3km

S/F Modular boxes , base & cover plate(Gang Box): SITCing and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required.

1 or 2 module (78 mm x 78 mm x 45 mm)-for voice and data outlet.(Make- Legrand/Panduit/Ortronics)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess includingcutting the wall and making good the same in case of recessed conduit as required. Preffered Make- AKG/NORPACK/Polycab/Dauphin

wiring for light point/fan point/exhaust fan point /call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable in surface recessed PVC conduit ,with piano type switch ,phenolic laminated sheet,suitable size PVC/G.I. boc etc.as required.

Group-C

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

2 run of cable

Suppyling and drawing co-axial TV cable RG-6 grade cable in the existing surface / recessed steel / PVC conduit as reqd.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade.of following size on wall surface as required.

upto 35sq.mm.(clamped with 1 mm thick saddle)

Above 35 sq mm and upto 95 sq mm (clamped with MS flat clamp)

Supply of ISI marked (IS : 7098 Pt-I) aluminium conductor XLPE Insulated armoured, served, sheathed cable 1100 volts grade. (Skytone, Rallison, CCI, Gloster make)

3.5C x35 sq mm

3.5C x70 sq mm

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing & Laying Vitrified Paring / Industrial Tiles - Size of Tile (300X300x10 mm size )

Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm. depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Supply, Installation, Testing and commissioning of 1 Elevator(s) Basic elevator data Elevator Type Passenger elevator PWU13/10-19 Product KONE U MonoSpace No of Units 1 Load & Capacity 884 kg or 13 persons Speed 1 m/s Stops & Openings 3 stops & 3 openings, Single entrance car Travel height 7.2 m Elevator Grouping Simplex Full Collective Control Well Dimension 2205 mm width and 1800 mm depth (required) Head Room height 4000 mm (required) Pit Height 1525 mm (required) MAP Floor Position Topmost floor (TOP) Car dimensions 1600 mm wide x 1350 mm deep x 2300 mm high Door dimensions 900 mm wide x 2100 mm internal height Door type Two-panel centre opening Plain Panel Finishes Car design Midrange Basic SL10 Car Panel Finish Brushed stainless SUS304 Handrail Tube D38 (HR61) Silver brushed stainless steel (ST4) at Rear Wall Ceiling & Lighting Square spot, LED Brushed stainless steel SUS304 (ST4) Square Spot Light LED STN LCD size [Inch] 5.7 Flooring 3 mm Pattern (PVC) Cloud Silver brushed stainless steel AISI304 finishing (ST4) Car Door Finish Brushed stainless steel SUS304 (ST4) Floor number Floor Mark Interfloor distance Landing door material 1-3 0, 1, 2 3600 mm Silver (ST4) Car operating panel 1 Full Height Silver brushed stainless steel ST4AFP with anti-fingerprint coating (ST4) Tempering glass STN LCD black Round surface mounted KDS93 Landing Signalization Stainless Steel Segmented LCD display Flush Mounted Tempered glass Round,surface mounted KDS93 Features Standard Car Emergency Light Fireman Drive Curtain of Light 169 Beams Accurate Relevelling, Automatic, Closed Door Additional Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Nudging service Attendant Service Square Spot Light LED

SITC of IP based Communication Server should be a full-featured IP based communications system providing a rich feature set of the system, with pure Voice over IP (VoIP) communications, across corporate Local and Wide Area Networks (LAN and WAN).System Architecture should be latest pure IP and must be 19”Rack mount with 2U chassis based architecture, the system should be full featured, modular and expandable for port capacity at least up to 896 extensions and 400 Trunks. Should be ROHS complied as green product with power saving, System Architecture should have networking capability with (1+49) location with full feature enabled, System must have built-in features, 4 party video conference (MCU) feature over intranet & internet.(IP hardware may be optional) , Remote Conferencing 32 party X 3 with password protection, Built-in UC i.e. Instant Messaging, Presence, BLF & outlook integration may be activated as per requirement(Optional), 4 Mobile Client user. The system should be equipped with 1 IP based Operator Console with 24 DSS Keys, HMS middle ware(if required external or internal), IP Extensions, 1 PRI, 8 Analog trunks., Detailed specs of the complete system is the part of this short specs, Preferred Make- NEC/Panasony

Supply of IP telephone Set - Make: NEC/Alcatel/Cisco IP PHONES SPECS:

24 Port POE Access Switch:- Supply of 24 x 10/100/1000T PoE ports and 4 x 100/1000X SFP ports, PoE+ L2 Switch , Switching Capacity 56Gbps and Forwarding Rate 41.7Mpps, Switch should support PoE and PoE+ with 370W minimum power budget, operating temperature 0°C to 50°C, Switch should support link reccovery within 50ms for Ring architecture, SDN or similar kind of technolgy should support, Warranty 5 year from Day 1 . Make:-NEC - WS-C2960X-24PS-L / Allied Telesis - Model AT-x230-28GP/EX2200-24P / Juniper - EX2200-24P)

Providing of 15 U wall mounted fully loaded Network Rack Width (mm)-600x600 (mm), Approx.Net Wt (kg) - 32, CRCA 'D' Grade thickness (mm) - 1.2, RAL 9017 (Matt Black), Glass - 4mm Toughened Tinted Glass Door, along with all following standard accessories. ( Make:- Valrack- Legrand, Rittal, Net-Rack, Schneider, or as approved by Architect).

Supply of BLUE/YELLOW CAT 6 LCS2 U/UTP 3 MTR (10 ft) factory made LCS2 Patch cord with boot Factory Crimped PVC,Performance at 250MHz Should be as per Standards - IEC 61935-2 - Ed. 3.0 ISO/IEC 11801, Usage Temp – 20 to + 60°C, No of Twists 500, No of insertions 750, 24 AWG at end user side. (Make:- Legrand-051774 /Amp , Cat#1859247-7/ Schneider/RIT)

Supply of BLUE/YELLOW color CAT6 LCS2 U/UTP 1 MTR (3.5 ft) factory made LCS2 Patch cord with boot Factory Crimped PVC,Performance at 250MHz Should be as per Standards - IEC 61935-2 - Ed. 3.0 ISO/IEC 11801, Usage Temp – 20 to + 60°C, No of Twists 500, No of insertions 750, 24 AWG for rack end. (Make:- Legrand--051772/ Amps/RIT , Cat#1859247-4 / Schneider)

SITC of white modular plate type Single front plate for 1 Nos. RJ 45 Data outlet (Make:Legrand/Panduit/RIT/Siemon)

Supply of RJ 45 Data Module to be fixed on face plate (Make:Legrand/Panduit/RIT/Siemon)

Supply of 24 port UTP jack panel (24 port RJ-45 Loaded CAT-6 UTP 19" rackmountable patch panel preferbaly with 6 blocks). (Make:Legrand/Panduit/RIT/Siemon)

Supply of 1 KVA Offline UPS with Internal Battery; Make-Numeric/APC/Vertiv

Supply and Fixing of following sockets including box of required size, grid face plate complete:

1 No x RJ45 Jack Outlet with box & face plate

Add 12 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

LACHHMAN SINGH