Construction of boundary wall around BBMB Middle School including dismantling of old boundary wall at Ganguwal.

Amount

Dismantling brick work tile, masonry or tile lining (b) In cement. (As per CSR-2020 item No.8.5(b).

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m. (As per CSR-2020 item No.6.19).

Cement concrete 1:6:12 (b) With stone aggregate 40mm gauge (ii) mixing by mechanical means using concrete mixer volumetric type. (As per CSR-2020 item No.10.8(b)(ii).

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth. (As per AOR-I)

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded. (As per CSR-2020 item No.10.28)

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (As per AOR-II)

Cement concrete 1:2:4 (a) with stone ballast or shingle (ii) mixing by mechanical means using concrete mixer volumetric type. (As per CSR-2020 item No.10.13 (a)(ii) AC Slip-1).

Fixing glass pieces on top of walls. (As per CSR-2020 item No.26.17).

12.5 mm thick cement plaster 1:5 (As per CSR-2020 item No.15.10).

20mm thick cement plaster 1:5 in two coat work. (As per CSR-2020 item No.15.21).

Striking joints in lime or cement on brick walls. (As per CSR-2020 item No.15.65).

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (As per CSR-2020 item No.16.13).

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (As per CSR-2020 item No.16.20).

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. (As per CSR-2020 item No.16.17).

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c) Tees, angles and channels. (As per CSR-2020 item No.18.1(c).

Welding by gas or by electric plant, including carriage to and from workshop etc. (As per CSR-2020 item No.18.28)

Providing and fixing barbed wire 4 points thick of around both sides with 0’-3” x 1/10 Lbs per ft. (As per AOR-III).

Bidder Name

Amount in Words

Anand Sales (India) (BID ID -784382)

SUBHASH CHAND (BID ID -784600)

Pankaj Kumar Govt Contractor (BID ID -784314)

Anand Sales (India) (BID ID -784382)

SUBHASH CHAND (BID ID -784600)