REPAIR/REPLACEMENET OF LT NETWORK, LT PANELS, CONNECTED WORKS AND OTHER ALLIED WORKS AT FATEHGARH CANTT UNDER GE FATEHGARH.

Amount

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed for laying of under ground cable, foundation of pole and stay etc. complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well remmining in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Supply and laying sand with approved fine grade sand around cable in cushioning for protection of under ground cable complete all as specified and as directed (only punned and consolidated volume to be measured)

Supply and laying kiln burnt bricks best quality locally available old size sub class 'B' bricks laid flat in trenches with axis of brick perpendicular to the axis of cable for cable protection complete all as specified and as directed.

Laying only serviceable burnt bricks obtained from the items specified here-in-before ( i.e during taking out of under ground cable) laid flat dry, in trenches with axis of brick perpendicular to the axis of cable for cable protection complete all as specified and as directed.

Disconnecting and Taking out existing unserviceable LT under ground cable of any description and in any position from trenches, cross sectional area 6 Sqmm to 10 Sqmm size , 2 / 4 core , complete all as specified and as directed.

...ditto.. as above but under ground cable of 16 Sqmm to 50 Sqmm any core ...ditto..

...ditto.. as above but under ground cable of 70 Sqmm to 95 Sqmm any core ...ditto..

Supply ,layng , jointing and testing in trenches or passing through pipe XLPE insulated armoured, heavy duty ,electric cable with aluminium conductor 1100 volts grade, cross-sectional area 95 Sqmm ,3.5 core ,complete all as specified and as directed.

...ditto.. as above but under ground cable of size 70 Sqmm 3.5 core ...ditto..

...ditto.. as above but under ground cable of size 50 Sqmm 3.5 core ...ditto..

...ditto.. as above but under ground cable of size 35 Sqmm 3.5 core ...ditto..

...ditto.. as above but under ground cable of size 25 Sqmm 4 core ...ditto..

...ditto..as above but under grund cable of size 16 Sqmm 4 core ...ditto..

...ditto.. as above but under grund cable ofsize 10 Sqmm 4 core ...ditto..

...ditto.. as above but under grund cable ofsize 10 Sqmm 2 core ...ditto..

...ditto.. as above but under grund cable ofsize 6 Sqmm 2 core ...ditto..

Laying jointing and testing only of old serviceable underground cable of any description of size 6 Sqmm to 16 Sqmm 2/4 Core in trenches as obtained in serviceable condition from taking out of cable complete all as specified and as directed.

Laying jointing and testing only of old serviceable underground cable of any description of size 35 Sqmm to 95 Sqmm 3.5 Core in trenches as obtained in serviceable condition from taking out of cable complete all as specified and as directed.

Drilling / Boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface mannually or pneumatically to accommodate/ or laying GI tubing not exc 80 mm bore (dia) for passing under ground cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item of BOQ.

S&F of 80 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection OR fixed on poles/ walls with suitable size of MS clamps and nut and botls/washers complete all as specified and as directed.

S&F of 50 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection OR fixed on poles/ walls with suitable size of MS clamps and nut and botls / washers complete all as specified .

S&F of 40 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall OR fixed on poles/ walls for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified .

S&F of 25 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall OR fixed on poles/ walls for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified .

M&L for MS clamp made out of 50x6 mm flat iron bending cold or hot,drilling holes for bolts , in any shape or size as indicated or directed and inclusive of one primer coat,one under coat and one finishing aluminium coat of paint for clamps other than required for fixing pipes in position.

M&L for Earthing complete with galvanized steel earth plate 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth strip/ earthing lead of size 25mm x 4mm flat by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints wiith and including excavation and earth work, GI pipe medium grade 40 mm bore for protection of GI earth strip from earth electrode, 20 mm bore GI Pipe light grade for watering, supplying and fixing test point terminal block made of gun metal or phosporos gross size 75 mm x 75mm x 25mm drilled and screwed including three nos 8mm dia 25mm long hexagonal head screwed , supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40mm x 40mm x 3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , complete all as shown in electrical plate No 3 of SSR Part-I (2009) and connected to earth test point including testing complete all as specified and directed. Note:- 1. Rates quoted by the contractors include for earth lead and its protection pipe upto and including 7.5m from the earth plate. 2. Additional earth lead /protection pipe if any beyound 7.5 m shall be measured and paid for separately under appropriate item of sch 'A'.

M&L for fabrication, supply, installation, testing and commissioning of out door type (CPRI approved Type tested) LT Feeder pillar box 0.90 m x 0.75 m x 0.45 m in depth made out of 3.15mm thick CRCA sheet and MS structural section of 50mm x 50mm x 6 mm comprising of copper bus bar suitable for 3 phase, 4 wire, 415 volts, 50 Hz, AC supply mounted on suitable bus bar insulators, 200 Amps rating suitably drilled and tapped with openable front and rear shutter hinged front and rear panels and locking arrangement, bottom plate provided with the requires numbers of cable entries / opening including cable glands , prewired with suitable size of copper wire, PVC insulated / PVC sleeves 1100 volts grade maintaining conventional colour code, powder coated painting complete embedded in PCC (1:3:6) type C-2 (using 40 mm graded aggregate) n. exc. 0.45 cum and provision of fixing accessories/ MCCB complete all as specified and directed Note:- MCCB will be measured and paid seperately.

M&L for fabrication, supply, installation, testing and commissioning of outdoor type feeder pillar box floor mounted , weather and vermin proof made out from 3.15 mm thick MS sheet ( CPRI type tested) with canopy type roof, over all size 0.75 m x 0.60 m x 0.30 m, front operated, two part hinged doors with locking arrangement, including built in aluminium busbar of size 40 mm x 5 mm (4 cm x 45 cm long) on base insulator with heat strinkable PVC sleeving having RYB-B colour code drilling holes for connection of incoming and outgoing cable, complete painting with two coat of synthetic enamel paint over a coat of red oxide primer, testing and installation on PCC/brick foundation, connection of cable with suitable aluminium lugs all as specified and directed.( Note :-MCCB will be measured and paid separately.)

S & F MCCB 200 Amps, 4 pole, 415 volts, 50 Hz 25 KA breaking capacity with adjustable thermal magnetic release with spreader link on both sides (Make : Legrand DPX 250 Cat part No : 4202 18 or equivalent of other specified makes)

S & F MCCB 160 Amps, 4 pole, 415 volts, 50 Hz 25 KA breaking capacity with adjustable thermal magnetic release with spreader link on both sides (Make : Legrand DPX 160 Cat part No : 4200 57 or equivalent of other specified makes)

S & F MCCB 125 Amps, 4 pole, 415 volts, 50 Hz 25 KA breaking capacity with adjustable thermal magnetic release with spreader link on both sides (Make : Legrand DPX 160 Cat part No : 4200 56 or equivalent of other specified makes)

M &L for erection only 8.5 metre and above long steel swaged poles of any description and in any position complete with cast iron base plate, finial taper plug, bolts, nuts & screw and specified type 410 SP -31 all as specified in same or other location as obtained in serviceable condition from dismantling including the following:- (a) Excavation in trenches exceeding 1.5 mtr wide x 2 mtr deep for pole foundation & getting out in soft loose soil, returning filling of soil after fixing the pole in foundation ramming earth around in layer not, exceeding 25cm thick and disposal of surplus soil to a distance not exc. 50 mtrs. (b) M&L for providing PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) in foundation 600 mm x 600 mm cross section planting depth 1.8 mtr for concrete incasing the pole upto GL all as directed. (c) M&L for providing PCC (1:3:6) type C2 (Using 20mm graded stone aggregate) for plinth block / Collar above GL 300 mm high and 450 mm dia all as directed. (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/concrete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of Synthetic enamel paint in alternate yellow & black strips all round paintng (05 Nos each strip 300 mm wide block. (e) M&L for writing letter or figures (Block, Roman, italic as indian) with thick synthetic enamel paint of apprised shade not exceeding height in numbring of pole all as directed .

M&L for Earthing complete with galvanized steel earth plate 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to earthing lead of size 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints wiith and including excavation and earth work, GI pipe medium grade 15 mm bore for protection of GI earth wire from earth electrode, 20 mm bore GI Pipe light grade for watering, supplying and fixing test point terminal block made of gun metal or phosporos gross size 75 mm x 75mm x 25mm drilled and screwed including three nos 8mm dia 25mm long hexagonal head screwed , supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40mm x 40mm x 3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , complete all as shown in electrical plate No 3 of SSR Part-I (2009) and connected to earth test point including testing complete all as specified and directed. Note:- 1. Rates quoted by the contractors include for earth lead and its protection pipe upto and including 7.5m from the earth plate. 2. Additional earth lead /protection pipe if any beyound 7.5 m shall be measured and paid for separately under appropriate item of sch 'A'.

S &F for galvanized iron earth strip 25 mm x 4 mm all as specified (Add / deduct for adjustment above and beyond contract provisions )

S &F for galvanized iron earth wire 4 mm dia all as specified (Add / deduct for adjustment above and beyond contract provisions )

Dismantling of overhead ACSR conductor of any size including removing of PG Clamps jumpering etc and kept in safe custody for reuse serviceable ACSR in the work & removing unserviceable conductor from site complete all as specified & as directed.

Dismantling of old unserviceable stay assembly including stay wire complete with necessary demolition of concrete excavation and earth work as reqd. and removing the same from site complete all as specified and as directed.

Dismantling of cross arms of MS channel or angle section etc complete fixed on RCC / steel tubular poles carefully including separating and setting a side serviceable cross-arms for reuse in the work and removing unserviceable cross arms complete all as specified and as directed.

Dismantling of insulators of any type & size from position including separating & setting a side serviceable insulators for reuse in the work & removing unserviceable insulator from site complete all as specified and as directed

Dismantling of old PCC/steel tubular pole of any size with necessary disconnection of electric wire, demolition of concrete foundation including excavation, earth work as reqd & removing the same from site complete all as specified and as directed.

M & L for preparing old painted surfaces by scraping and removing old paints,rust etc from steel tubular poles (above the planting depth and PCC coping of 9.0 Metre long pole) and Mild Steel cross arms, cable protection pipe,brackets etc and applying one coat of synthetic enamel paint alternate yellow & black strips alround painting ( 5 Nos each strip 300 mm wide) and remaining portion of pole and cross arms,cable protection pipe,brackets etc painted with one coat of aluminium paint including marking of pole No with black background and white lettering with all arrangement for ladder etc all as specified and directed .

M&L for straight through joints ( epoxy type ) for LT underground cable including joint kits suitable for aluminium conductor cable 3.5 core 50 Sqmm complete all as specified and as directed

...ditto...as above but 3.5/4 core 25 to 35 Sqmm any core ...ditto...

...ditto...as above but 4 core 10 to 16 Sqmm any core ...ditto...

M&L outdoor LT END Termination Heat Shrink Kits for LT underground cable suitable for aluminium conductor cable of size 6 sqmm to 16 Sqmm (2/4 core) ( Make : 3M / Raychem ) complete all as specified and as directed

M&L outdoor LT END Termination Heat Shrink Kits for LT underground cable suitable for aluminium conductor cable of size 185 sqmm to 240 Sqmm (3.5 core)) ( Make : 3M / Raychem ) complete all as specified and as directed

M&L outdoor LT END Termination Heat Shrink Kits for LT underground cable suitable for aluminium conductor cable of size 25 sqmm to 50 Sqmm (3.5/4 core)) ( Make : 3M / Raychem ) complete all as specified and as directed

M&L outdoor LT END Termination Heat Shrink Kits for LT underground cable suitable for aluminium conductor cable of size 70 sqmm to 150 Sqmm (3.5/4 core)) ( Make : 3M / Raychem ) complete all as specified and as directed

Supply and fix of cable junction box made of polycarbonate thermoplastic , weather , water & dust proof , fire retardant with aluminium bus bar of size 25 mm x 3 mm mounted on porcelain/ cast resin insulators with MCB SP 0.5 A , polyamide threaded cable glands , lock nut fixed on PCC/Steel pole including clamp made out of 20mm x 3 mm MS flat iron complete all as specified and as directed (Make : Hensel / Schneider/Sintex )

M&L Brick work with sub class 'B' bricks,old size brick, straight or curved on plan exceedin 6m mean radius in wall, built in CM( 1:4 ) complete all as specified and as directed. .

M&L Brick work with sub class 'B' bricks,old size brick, straight or curved on plan to any radius in half brick wall, built in CM( 1:4 ) complete all as specified and as directed. ..

M & L for 15 mm thick rendering in cement morter (1:4) on fair face of brick or concrete surface finished even and fair including preparing of surfaces on wall plastered new surfaces and applying two coats of colour washing over a coat of white wash all as specified and as directed .

M & L for straining of Aluminium conductor steel reinforeced (ACSR) of size as ordered, fixed on and over head LT electric line required sag and binding the conductor with insulator and jumper with aluminium binding wire conforming to IS:398 Part-II complete all as specifie and as directed.

M & L for fixing and straining only of Aluminium conductor steel reinforeced (ACSR) of any description and in any position as obtained in serviceable condition from dismantling , fixed on and over head LT electric line required sag and binding the conductor with insulator and jumper with aluminium binding wire complete all as specifie and as directed.

S & F cross arms made out of mild steel channel or angle section of reqd size and shape including clamp, back plate with bolts, nuts & washers drilled for insulator bolts, welding, bending cold or hot in any shape or size as directed and painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed.

...Ditto.. But Fixing only cross -arms , bracing of any description and in any position as obtained from dismantling including painting ... Ditto....

S & F stay assembly complete with all accessories and stay clamps all as shown in electrical plate No 1 of SSR Pt-1 with using stay rod of 16 mm dia with and including necessary excavation and earth work, PCC work, stay rod, loop insulator of size 65 x 90 mm, stay strend of GI wire of size 7 x 3.5 mm, stay bow and necessary clamps etc complete all as specified & as directed.

S & F pin type insulator porcelain vitreous, white, brown or green including one galvanized mild steel spindle, two galvanized iron washer and one galvanized iron nut 100 mm height, 65 mm dia for 1100 volts grade complete all as directed.

...Ditto..., but fixing only old serviceable pin type insulator as obtained from dismantling ditto....

S & F shackle type porcelain vitreous white, brown or green insulator of size 75 mm height 90 mm dia including MS strips 31x3 mm washers, insulator bolts 12 mm dia & nuts suitable for working pressure 1100 volts grade all as directed.

...Ditto..., as above , but fixing oly old serviceable shackle type insulator as obtained from dismantling .....ditto.....

Dismantling unserviceable existing street light bracket made out of 40/50mm bore GI tubing n.exc 1.5 metre long including MSclamp nuts, bolts and washers and S&F street light bracket made out of GI tubing 40mm bore medium grade n.exc 1.5 metre long bent to shape as directed including suitable MS clamp of FI 50x6mm with MS bolts nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

Taking out old existing unserviceable street light connecting lead and S&F PVC insulated stranded copper conductor cable three core 650/1100 volts grade of size 1.5 Sqmm with and including drilling holes in poles complete all as directed.

Dismantling of old unserviceable service connection cable with GI wire and reel insulator with house service brackets any type complete all as specified directed.

Cutting of tree branches touching LT overhead lines to maintain a clearance of 1.50 metre from the overhead line to near by trees complete all as directed. Note:- Only effective length shall be measured and paid for and proper digital photographer shall be preserved as a record and measurement shall be made once during currency of contract period.

Fabrication , Supply, installation , testing & commissioning of floor mounted free standing totally enclosed dust and vermin proof LT control panel cubical type of size 1.25 m x 1.60 m x 0.50 m (minimum size) fabricated out of 2 mm thick MS sheet steel front operated with locking arrangement for each switch gear & openable doors in back side of the panel, cable entry & exist from bottom with cable glands and gaskets, copper TPN bus bars 40 x 5 mm size for main bus bar and suitable size of copper strip for down bus bar of out going switch gear ( Six out going ) fixed on epoxy based rasin insulator of suitable sizes with internal wiring with 1.5 sqmm PVC insulated stranded copper conductor cable & bus bar shall be insulated with different colour code sleeves to indicate RYBN and to be connected with copper lugs including powder coated painting and necessary PCC foundation work complete all as specified and directed comprising of the following items (Rajput Sub Stn) :- The cubical shall have a bottom channel of size 75 x 40 mm duly coated with zinc metal coating.A detachable predrilled gland plate of thickness at the bottom. (a) Fixing only exiting Air circuit breaker manual draw out type with microprocessor release 630 A , 50 KA breaking capacity, 415 volts, 4 pole, 50 cycle complete as abtained in serviceable condition 01 No. (b) S & F MCCB 400 Amps, 4 pole, 415 volts, 50 Hz 36 KA breaking capacity with adjustable thermal magnetic release with spreader link on both sides (Make : Legrand DPX 630 Cat No : 4220 07 ) - 01 No (c) S & F MCCB 200 Amps, 4 pole, 415 volts, 50 Hz 25 KA breaking capacity with adjustable thermal magnetic release with spreader link on both sides (Make : Legrand DPX 250 Cat No : 4202 18 ) - 03 Nos (d) S & F MCCB 100 Amps , 4 pole, 415 volts , 50 Hz , 25 KA breaking capacity with adjustable thermal magnetic release, with spreader links on both sides.(Make : Legrand DPX 160 Cat No : 4200 55 ) - 02 Nos (e) S & F MCCB 63 Amps , 4 pole, 415 volts , 50 Hz , 16 KA breaking capacity with adjustable thermal magnetic release, with spreader links on both sides (Make : Legrand DPX 160 Cat No : 4200 13 ) - 01 No (f) S & F on load change over switch 415 volt, 4 pole, panel mounting , front oparated type, of capacity 400 Amp incl all arrangement for housing of the same with suitable size copper lugs confirming to IS 13947 (Part-3); IEC 60947-3 (Make : C&S Cat No CSCS400DM4CO ) - 01 No (g) LED indicating lamp - 03 Nos. (h) Multifunction meter Accuracy Class 1.0 to measure the following parameters such as V, A, F, PF, kW, kVA ( Make : L&T Cat No : WL440511OOOO ) - 01 No N0TE: (i) All metering connection shall be protected by proper bakelite rewireable fuses. (ii)Cost of PCC foundation is included in the above cost.

Dismantling existing unserviceable feeder pillar box of any description and in any position including disconnection from different sites all as directed.

Disconnection and dismantling of existing serviceable under ground cable of size 6 Sqmm to 16 Sqmm 2/4 core from LT Panel/FPB and taking out cable/cable loop from underground with and including necessory excavation and earth work by excavtion of soft/loose soil and insertion of heat shrinkable PVC colour sleeves on cable cores and crimping of suitable size aluminium cable lugs as required and refixing the same in its original position complete all as specified and as directed.

Disconnection and dismantling of existing serviceable under ground cable of size 25 Sqmm to 70 Sqmm 3.5/4 core from LT Panel/FPB and taking out cable/cable loop from underground with and including necessory excavation and earth work by excavtion of soft/loose soil and insertion of heat shrinkable PVC colour sleeves on cable cores and crimping of suitable size aluminium cable lugs as required and refixing the same in its original position complete all as specified and as directed.

Disconnection and dismantling of existing serviceable under ground cable of size 95 Sqmm to 240 Sqmm 3.5/4 core from LT Panel/FPB and taking out cable/cable loop from underground with and including necessory excavation and earth work by excavtion of soft/loose soil and insertion of heat shrinkable PVC colour sleeves on cable cores and crimping of suitable size aluminium cable lugs as required and refixing the same in its original position complete all as specified and as directed.

M & L for MS sheet 20 x 15cm, thickness of 2mm and square bar 10mm dia, 35 cm long framed work with shape of 'T' etc, necesary welding, earth works, PCC 15x15x15cm, etc painting / marking of TESTED ON -------, RESULT --------------, and all arrangements complete all as specifed and directed

S & F pre cast RCC cover slab over earth pit size of exc 300mmx300mmx50mm but n.exc 450mmx450mmx50mm including reinformement (8 mm dia bars both ways @ 75 mm c/c) etc, including dismatling complete all as specified and directed.

S & F loop type insulator vitreous procelain white, brown or green small size with overall dimensions 65 x 90 mm and clearance of hole 16 mm complete all as specified & as directed.

M&L for Supply and erecting 9.00 meter long steel swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screw and specified type 410 SP -31 all as specified including the following:- (a) Excavation in trenches exceeding 1.5 mtr wide x 2 mtr deep for pole foundation & getting out in soft loose soil, returning filling of soil after fixing the pole in foundation ramming earth around in layer not, exceeding 25cm thick and disposal of surplus soil to a distance not exc. 50 mtrs. (b) M&L for providing PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundation 600 mm x 600 mm cross section planting depth 1.8 mtr for concrete incasing the pole upto GL all as directed. (c) M&L for providing PCC 1:3:6 type C2 (Using 20mm graded stone aggregate) for plinth block / Collar above GL 300 mm high and 450 mm dia all as directed (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/concrete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of Synthetic enamel paint in alternate yellow & black strips all round paintng (05 Nos each strip 300 mm wide block. (e) M&L for writing letter or figures (Block, Roman, italic as indian) with thick synthetic enamel paint of apprised shade not exceeding height in numbring of pole all as directed .

M/S Sonu Traders

S B ENTERPRISES