Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹4.0 Cr
EMD Value
₹4 L
Closing Date
19 Sept 2025, 11:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Bangalore Electricity Supply Company Limited
Mohankumar T G
Supply of 11KV 5KN Pin Insulators as per tender Specification, GTP and Drawings
BESCOM/2025-26/IND0158
BESCOM/2025-26/IND0158
Open
Electrical Cables And Wires; Electrical and Electronics
Two Tender Document System(Two Cover)
BESCOM Corporate Office Procurement section Bengaluru
3 documents required · 3 mandatory
The Bidder should have a minimum of 3 years works experience in Manufacturing/ Supplying/Distribution of 11 kV polymeric insulators as on date of bid submission.
In case of Original Manufacturer: The Bidder should have manufactured, tested and supplied at least 80percent (40percent in respect of Micro & Small Enterprises) of the tendered quantity of 11 kV polymeric insulators in any one of the preceding 3 years i.e., 2022-23, 2023-24 & 2024-25 (last 2 years i.e., 2023-24 & 2024-25 for Micro & Small Enterprises) to Electricity Distribution companies or Government Electrical Utilities/PSUs. In case of Authorized Dealer / Distributor a. The Original Manufacturer should have manufactured, tested and supplied at least 80percent (40percent in respect of Micro & Small Enterprises) of the tendered quantity of 11 kV polymeric insulators in any one of the preceding 3 years i.e., 2022-23, 2023-24 & 2024-25 (last 2 years i.e., 2023-24 & 2024-25 for Micro & Small Enterprises) to Electricity Distribution companies or Government Electrical Utilities/PSUs. And b.The Authorized Dealer / Distributor should have supplied at least 30percent of the tendered quantity of 11 kV polymeric insulators in any one of the preceding 3 years i.e., 2022-23, 2023-24 & 2024-25 to Electricity Distribution companies or Government Electrical Utilities/PSUs.
The Bidder should be in existence as any of the following Company incorporated in India under the Companies Act, 1956/2013 including any amendment thereto LLP incorporated in India under the Limited Liability Partnership (LLP) Act, 2008 including any amendment thereto Partnership Firm under Partnership Act, 1932 in India Sole Proprietorship Concern
The Bidder shall be a Manufacturer / Authorized Dealer / Distributor of 11 kV polymeric insulators.
The Bidder shall upload the type test certificates for having conducted all the type tests mentioned in the relevant IS/technical specification on tendered type insulator at CPRI/ERDA & such type test reports shall not be older than five years as on the last date of bid submission.
The Bidder should not be under default/ debarred/ blacklisted by any Electricity Distribution Companies or Govt. Electrical Utilities/ PSUs, as on the date of bid submission.
Litigation History: The Bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the preceding five years, A consistent history of awards involving litigation against the Bidder or any partner may result in rejection of Bid.
Any Bidder from a country which shares a land with India will be eligible to bid in this tender only if the Bidder is registered with the Competent Authority. (As per Government Order No. FD 455 Exp-12/2020 dated 25.08.2020.)
A certificate for having read the clauses is required to be submitted/uploaded by the Bidder separately in the following format: I have read the clause regarding restrictions on procurement from a Bidder of a country which shares a land border with India. I certify that this Bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this Bidder fulfils all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)
The Average Annual Financial Turnover of the Bidder shall not be less than the Amount Put to Tender (However it will be 50% in respect of Micro & Small Enterprises) during the preceding 3 financial years i.e., 2021-22, 2022-23 and 2023-24 (However, it will be last 2 years i.e., 2022-23 and 2023-24 for Micro & Small Enterprises).
The Liquid Assets as 31/7/2025 at a later date before submission of the bid consisting of Cash at Bank plus Term Deposits plus availability of fund based credit facilities in any Nationalized/scheduled Bank shall not be less than25percent of the amount put to tender.
₹500
₹4 L
20 Aug 2025
20 Aug 2025
22 Sept 2025
29 Aug 2025
29 Aug 2025
HT - 11 kV 5 kN Polymeric Pin Insulator
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
seci ifb_1408.docx
Tender Document • 0.05 MB
secii itb_1408 (11kv pin)).doc
Tender Document • 0.23 MB
Liquid Asset Format Annexure( Format of Banker's Certificate).pdf
Tender Document • 0.05 MB
GTP Polymer Pin insulator (1).xlsx
Tender Document • 0.01 MB
annexure_1408.docx
Tender Document • 0.02 MB
secv schedule of requirement_1408.docx
Tender Document • 0.06 MB
seciv scc_1408.docx
Tender Document • 0.06 MB
secvii techno-commercial sheets_1408.xls
Tender Document • 0.05 MB
Dwg-5KN Polymer Pin insulator.pdf
Tender Document • 0.06 MB
seciii gcc_1408.doc
Tender Document • 0.07 MB
11 kv 5KN technical specification.pdf
Tender Document • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .