Work for Shifting of 11 KV and LT lines and other electrical equipments in Etah-Ganjdundwara Marg Chaudikaran under EDD-II Etah on semi turnkey basis (Deposit Scheme) Work for Shifting of 11 KV and LT lines

Amount

Supply of 11 KV Line Material as per relevant ISS

Stone Pad 300x300x75 mm

Clamp with Nut & Bolts

Guarding Channel

Guarding Channel Clamp

GI Wire 10 SWG

Barbed Wire

Earthing Complete

F Clamp with Nut & Bolts

Danger Board with Clamp

Number Plate

11 KV X Arm Holding Clamp

T Off Channel

Jointing Sleev for ACSR Weseal

Alluminium Tape

Alluminium Binding Wire

11 KV Top Channel 100x50x6 mm

Dropper Channel

MS Angle 75x75x6x2028 mm

Alluminium Paint

Red Oxide Paint

11 KV Cable Jointing Kit O/D Suitable for XLPE 3x70 sq mm

11 KV Cable Jointing Kit I/D Suitable for XLPE 3x70 sq mm

Extra for Stays at Angle Location

Extra with Stays at Road Crossing

Supply of LT Line Material as per relevant ISS

Stone Pad 300x300x75 mm

LT ABC 1x16+1x25 sq mm

Dead End Clamp

Earthing Complete

Number Plate

I Hook with Clamp

Suspension Clamp

Shackle Isolator with Nut & Bolts

LT Clamp With Nut & Bolts

Alluminium Paint

Red Oxide Paint

Guarding Channel

Guarding Channel Clamp

GI Wire 10 SWG

Erection Work of 11 KV Line

Safe carriage of line material from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Safe carriage of 8.5 Mtr Long PCC pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Safe carriage of 11 Mtr Long ST pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Safe carriage of 11 KV XLPE Cable from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be gruted properly as per DVVNL/Respo norms.

Erection of 11 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.

Erection of 11 mtr ST Pole as Double Pole/Section Pole including fixing of all HT/LT accessories etc. complete with TPMO, pole should be grouted properly as per DVVNL/RESPO norms.

Laying, sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

ACSR Weseal Conductor

11 KV XLPE Cable 3x70 sq mm

Stone Pad 300x300x75

Danger Board with Clamp

Number Plate

O/D Jointing Kit suitable for 3x70 sq mm XLPE Cable

I/D Jointing Kit suitable for 3x70 sq mm XLPE Cable

Earthing Complete

Stay Set Complete

Barbed Wire

Jointing Sleev for ACSR Weseal

Alluminium Paint

Red Oxide Paint

Alluminium Tape

Alluminium Binding Wire

New guarding of HT/LT lines with GI wire as per RESPO norms/specification.

Erection Work of LT Line

Safe carriage of line material from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Safe carriage of 8.5 Mtr Long PCC pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Safe carriage of 11 Mtr Long ST pole from store center Etah / nearest 33/11 KV S/S to direct pit site in distance range 0 to 60 Km. including loading and unloading at both side.

Erection of 8.5 mtr long PCC Pole as single support including fixing of HT/LT accessories etc complete, pole should be gruted properly as per DVVNL/Respo norms.

Erection of 11 mtr ST Pole as single support including fixing of all HT/LT accessories etc. complet, pole should be grouted properly as per DVVNL/RESPO norms.

Laying, sagging stringing, binding, jumpering & fixing of all accessories etc of following conductor on the newly/old erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work.

ACSR Weseal Conductor

LT ABC 3x95+1x70+1x16 sq mm

LT ABC 1x16+1x25 sq mm

Stone Pad 300x300x75

Number Plate

Earthing Complete

Stay Set Complete

Alluminium Paint

Red Oxide Paint

Dead End Clamp

Suspension Clamp

I Hook with Clamp

New guarding of HT/LT lines with GI wire as per RESPO norms/specification.

Dismantling of ST Pole stacking at proper place

Safe carriage of dismantling following old material from pit site to store in distence 0 to 60 Km. With loding and unloding at both ends and proper stacking in store.

ACSR Weseal Conductor

LT ABC 3x50+1x135+1x16 sq mm

LT ABC 1x16+1x125 sq mm

11 KV XLPE Cable

Cross Arm/F Clamp

T Channel/Top Channel/Dropper Channel with Calmp

Base Angle/LT Clamp/I Hook/Dead End/Suspension Clamp

Safe carriage of dismantling ST Pole from pit site to store in distence 0 to 60 Km. With loding and unloding at both ends and proper stacking in store.

ABG ENGINEERS (BID ID -4516531)

M/s APOORWA ELECTRICALS (BID ID -4516226)