REPAIR AND MAINTENANCEOF SECURITY LIGHTS/ROAD LIGHTS SOLAR LIGHTS AND STAND BY GENERATOR SETS AT MADHOPUR UNDER GE BASOLI

Amount

Repair/rectification for street/security light/ perimeter light/ flood light any type, capacity & make to make the security/street lights in serviceable condition as intimated by JE E/M / Engineer -in- Charge after rectification/trace out the fault which includes removing of street/security light fitting from LT/HT PCC/steel tubular/swan neck poles, refixing after repair, tightening of loose connection on ACSR conductor/with bus bar chamber/in DB, replacement of ballast, lamp, ignitor, lamp holder, capacitor, replacement of glass, jumper breakage, replacement of connection wire or any other part and refixing in proper alignment on GI pipe bracket or by other means as per site requirement incl replacement of screws,nut,bollts washers as reqd, proper connection with PVC insulation tape etc complete to keep the light in serviceable condition through out the period of contract by repairing one time all as directed to the entire satisfaction of JE E/M / Engineer-in-Charge Note : (i) Worn out/ damaged/ unserviceable parts to be replaced shall be measured and paid for separately under relevent items of sch 'A' as supply only and fixing is deemed to be included under this item. (ii) All the T&P and transportation required for the work shall be arranged by the contractor which shall be deemed to be included in quoted rate. Contractor shall provide the all type of T & P i.e. tools, insulation tape, ladder any type etc to electrician for attending the complaints. The quoted rate include the cost of minor items i.e. screws, nuts, washers for light fitting etc. (iii) Contractor shall provide & maintain the register regarding 100% serviceability of security lights duly signed by the JE/Engr-in-Charge, contractor, unit rep. (iv) The work will be carried out on day to day at as per direction of JE/ Engr-in-charge. (v) The electrician shall receive the complaint from JE /Engineer -In -Charge on complaint slip and after completion of job the slip shall be deposited to JE /Engineer -In -Charge daily duly signed by users. The printed complaint slip and compliant register shall be arranged by the contractor without any extra cost. (vi) The contractor shall arrange one electrician and one helper in one shift for 0900 hrs to 1700hrs on daily basis except sunday and holidays. (vii) An inventory for the parts/spares which are found unserviceable and requir replacement with new parts/spare shall be prepared and kept in record duly signed by Engr-in-charge and contractor. (viii) In case non deployment/absence of staff from duty recovery @850/- per day for electrician and Rs. 550/- per day for helper shall be recovered from the contractor's dues. The record of presence of workmen with name and details shall be maintained with signature of JE E/M, Engr-in-Charge and contractor. The decision of accepting officer shall be final and binding.

Supply only HPSV Lamp of capacity 70 Watts

Supply only HPSV Lamp of capacity 150 Watts

Supply only HPSV Ballast of capacity 70 Watt

Supply only HPSV Ballast of capacity 150 Watt

Supply only HPSV Capacitor of capacity 70/150 Watt

Supply only power tone quartz metal halide lamp tublar (MH-T) Lamp of capacity 150 Watts (white light)

Supply only HPSV igniter of capacity 70/150 Watt

Supply only Holder for HPSV lamp suitable for 70/150Watts fittings

Supply only Driver electronic compact type suitable for LED street light fitting 70 Watt as per sample/required at site complete all as specified and directed.

Supply only Driver electronic compact type suitable for LED street light fitting 90 Wattas per sample/required at site complete all as specified and directed.

Supply only Driver electronic compact type suitable for LED street light fitting 120 Wat as per sample/required at site complete all as specified and directed.

Supply only Chip electronic compact type suitable for LED street light fitting 70 Watt as per sample/required at site complete all as specified and directed.

Supply only chip electronic compact type suitable for LED street light fitting 90 Watt as per sample/required at site complete all as specified and directed.

Supply only Chip electronic compact type suitable for LED street light fitting 120 Watt as per sample/required at site complete all as specified and directed.

Supply only CFL Lamp thread type of capacity 65 Watts complete all as specified and directed

Supply only CFL Lamp thread type of capacity 85 Watts complete all as specified and directed.

Supply only porcelain Lamp holder suitable for 45/65/85 watt CFL Lamp fitting thread type complete all as specified and directed.

Supply and fix in repair for street light bracket made to shape at required angle made out of 50mm dia ( light grade ) GI tubing of length not less than 1.2m long suitable for fixing /holding street light fittings including mild steel flate iron 50 x 6 mm clamp 02 Nos with bolts, nuts and washer complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair for 2.5 sqmm PVC insulated and sheathed cable twin core aluminium conductor cable from over head conductor to street light fittings complete all as specified and directed.

Supply and fix in repair / replacement LED street light fitting of capacity 45 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light source with electronic chip and driver (lamp type 45W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLSP145 of make polycab or equivalent in CG/Bajaj/Philips.

Supply and fix in repair / replacement LED street light fitting of capacity 60 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 and impact reistance of IK07 with high power LEDs as light source with electronic chip and driver (lamp type 60W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLSP160 of make polycab or equivalent in CG/Bajaj/Philips.

Supply and fix in repair / replacement LED street light fitting of capacity 72 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 with high power LEDs as light suorce with electronic chip and driver (lamp type 72W LED) suitable for pole dia 54mm(max)complete with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed. Cat Part No PCGLSP172 of make polycab or equivalent in CG/Bajaj/Philips.

Supply and fix in repair / replacement flood light of capacity 200 Watt energy saving & environmental friendly long life versatile pressure die cast aluminium with ptotection IP66 made out pressure die cast aluminium housing suitable lens & tughened glass with high power LEDs as light source with electronic chip and driver of cat part No PCGLFT10112057 of make polycab or equivalent in CG/Bajaj/Philips. with the provision of double driver and additional surge protector of capacity 10 kv all as specified and directed by engr-in-charge

Supply and fixing in replacement PVC conduit 25mm dia medium grade for fixing along the pole with 02 Nos clamps per pole the connections from junction box to street lights all as specified and directed.

Excavation in trenches not .exceeding 1.5m wide and not exceeding1.5m depth and getting out in any type of soil, complete all as specified and directed .

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc.25 cm complete all as specified and directed .

Removing excavated material n exc. 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified .

Material and labour for well burnt, old size Sub Class 'B' brick covering protection to the eletric cable laid dry flat transversally along the length of cable on sand cushioning with width equal to length of brick complete all as specified and directed.

Material and labour for sand cushioning to under ground cable 8 cm before laying the electric cable and 15 cm after laying the cable as specified in SSR 1991 of part -I complete all as specified and directed.

Material and labour for prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 102mm x 279mm at bottom,class 10 complete all as specified and directed . Note :- Excavation earth work and PCC work shall be measured and paid for separately under respective items.

Material and labour for plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation & filling of pole/stay, complete all as specified and directed.

Material and labour for Continuous earth wire/guard cradle horizontal/rectangular fabricated with 4mm dia galvanized mild steel, binding wire including dismantling and taking out the damaged broken GI Earth wire in any position complete all as specified and directed .

Material and labour for Aluminium conductor, steel reinforced (ACSR) conductor of any size for OH lines including stretching, binding with aluminium binding wire, jumpers, line taps etc including dismantling and taking out the damaged broken ACSR conductor of any size from service feeder or distribution span in any position complete all as specified and directed.

Supply and fix for Stay assembly complete with stay rod 20 mm dia and all accessories all as shown in electrical plate No. 1 of SSR Part-I including dismantling and taking out the damaged broken stay assembly in any position and removal for further disposal complete all as specified and directed. Note :- Excavation, earth work and PCC work shall be measured and paid separately under respective items.

Material and labour for loop insulator vitreous porcelain, white,brown or green with overall dimensions 140mm,clearance from hole 25.5 mm complete all as specified and directed .

Material and labour for galvanised stay strand of size 7/4 mm ccomplete all as specified and directed .

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 50 sq mm 3.5 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 25 sq mm 3.5 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 4.0 core complete all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe UG cable XLPE insulated,armoured heavy duty electric cable with aluminum conductor,1100 Volts grade,cross section area 16 sq mm 2.0 core complete all as specified and directed.

Supply and fix for DWC high densiy polyethylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the inner wall conforming to IS: 14930(Part I & II) for protection of underground cable laidalong pole/along wall/in PCC on GL/roof and including all fittings as required at site including taking down the old unserviceable pipe complete all as specified and directed.

Supply and fix in repair for junction box of size 300x250x150mm made out of 1.6 mm thick CRCA sheet powder coated front hinged door with openable and self closing arrangements including aluminium bus bar 3 Phase 4 wire system of size 20mm x 5mm fixed on SMC/DMC insulators and cable entry glands for connections and MCB SP 6 Amps-01 No all as required and fixed to poles with MS clamp made out of MS flat iron of size 25x5mm and including nuts, bolts and washers complete all as specified and directed.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 200 mm ampore in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 250 mm imperial in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 300 mm diva in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

Supply and fixing in replacement polycarbonate globe prismatic finish of size 385x340 mm seattle in shape in and including with holder B-22 having provision for fixing on pipe and LED lamp all as specified and directed. Make : Bajaj/CG/Philips.

M&L for repair and maintenance of solar street light, solar panel (electronic) and wiring including replacement of CFL tube charging of solar battery including testing, filling of acid solution and making functional complete all as specified and directed

Supply and fix Off load change over switch four pole with sheet metal enclosure of capacity 100 Amps , 415 Volts,Ac with necessary nuts, bolts and washers including necessary electric connections complete all as specified and directed

Supply and rewirable switch fuse unit double pole 240 volts of rating 32 Amps with rewirable type carrier of cat part No RCDP0032 with sheet metal enclosure fixed with necessary nuts, bolts and washers including necessary electric connections all as specified and directed of cat part No RCDP0032 of make Indo Asian or equivalent in C&S/Havells

Supply, install, testing and commissioning in replacement of factory made and tested (including CPRI approved test certificate) LT Feeder Pillar box (KISOK) outdoor type, of size 0.75 x 0.6 x 0.4 Mtr , plateform mounted, suitable for 415 volts 3 Phase 4 wire, 50 Hz AC supply system all as specified and directed, having bus bar chamber with insulated Aluminium bus bars100 Amps ratings installed on porcelain insulators, The panel shall be dust and vermin proof, made of 3.15mm thick CRCA MS Sheet and 40 x40 x5mm thick angle iron for base frame work. The complete feeder pillar box shall be powder coated including internal wiring with PVC insulated solid copper conductor FRLS cables approximate size but not less than 4 Sqmm front opening type with appons for cable entry with double door shutter including locking arrangement as per nanufactures with 2 keys. the scope of Work includes the following:- Incomming:- (a) MCCB 63 Amps rating, 415 V, 4 Pole with breaking cap 16kA, -01 No (b) LED indicating lamp RYB-01 Set (Set of three) Outgoing:- (a) Analog time switch 65 Amps of make Indoasian and with suitable size of 3 pole power contractors- 01 No Toggle switch- 01 No, out going MCB TPN 40 Amps - 02 Nos MCB SPN 40 Amps - 02 No Note:- (i) Panel shall be fixed on angle iron frame with PCC 1:2:4 type D-2 using 20mm graded stone aggregate , 45cm height from normal ground level. (ii) All incomming MCCB shall be connected through MCCB spreraders with incomming bus bar and incoming cable shall be connected with incomming bus bar. (iii) Cost of angle iron frame & platform , MCCB spreaders, cable glands, locking arrangements with lock and key and any addition/ alternation if required will be included in this item. No extra cost will be paid to Contractor.

Supply and fix in repair of lead acid battery for solar light 12 volt, 100 AH heavy duty maintenance free incl initial charged complete all as specified and directed.

Supply and fix in repair for bus bar chamber outdoor type, comprising of encloser made out of 3.15 mm thick CRCA sheet of size 0.6 X 0.50 X 0.35 mtr , powder coated with 04 Nos of aluminium bus bar of 100 Amps 1100 volts grade, fixed and including insulators with provn of 04 X incoming/outgoing cable hole and provided with rubber bushes with provn of earth connection duly provided with angle iron frame stand of size 40x40x5 mm with 40 cm grouted in PCC and 40 cm above the ground level in and including with necessary PCC and earth work complete all as specified and directed.

KALSI CONSTRUCTION CO

JAI DURGA CONSTRUCTION CO

G.M. ENGINEERING SERVICES