Signalling work in connection with (1) Extension of UP & DN loop line to achieve 753MCSR at Waghoda on Bhusawal division. (2) Various Signalling Works in connection with (TRR/CTR Work) on Bhusawal division.

A1-Extension of UP & DN loop line to achieve 753 M CSR at Waghoda on

A2-Various signalling works in connection with TRR and CTR work. 1002453.29 Below/P

B1-Extension of UP & DN loop line to achieve 753 M CSR at Waghoda on

C1-Extension of UP & DN loop line to achieve 753 M CSR at Waghoda on

Supply of cable route marker as per RST/C/203 of FRP. (Inspection by Consignee)

Deployment of manpower like unskilled labour to work in emergencies or as requried during cable shifting,finding the existing cable route ,shifting and placing of material in depot etc

Deployment of manpower like skilled labour for supervision and technical support in emergencies or as required during cable shifting, finding the existing cable route etc.

Supply of Bumpless Automatic power source change over Device DC -20V- 120V,min 40 A (2 input sources) Model no. PT-RSA-HL-DC-04 or RE-SDSM-40 or similar. (Inspection by RDSO)

"Installation of item Automatic changeover unit of signal/ Track /Point supply of 32A, DC consisting of 3TC44 contactors or similar , LED Lamp, Push button terminals, VSR, polarity switches. "

Supply of Cable fault locator as per specification Make :Tempo,Stanlay or Greenlee.Module SIDEKICK PLUS 1155-5001 (Inspection by Consignee)

Supply of GANGA KAVERI 110 mm Diameter PE 100 HDPE Pipe (Detailed Description/Specification as per Product # 1 of GeM Contract No. GEMC-511687786912153 dt.08/12/2023) (Inspection by Consignee)

Chase cutting 500mm deep in hard rocky area as per DRG Ni- CORE/S&T/ALD/SK/579/04 per meter

Supply of composite rack 19" standard reupdated make with fixing arrangement fpr 9 mounting of signal/telecom equipment. It includes all materials like NO/NC push buttons switches (Techno make or similar) Jumbo LED 24 V (Power type) e.t.c as per site requirement for fixing of KLR in other equipments as per instruction of site Engineer. (Inspection by Consignee)

"Supply of Digital Clamp ON EARTH Tester ( make: HTC CE8201 or Fluke make ) LCD display Auto ranging Digital Earth Resistance Meter" (Inspection by Consignee)

Supply of Drill bit 7.2mm (Inspection by Consignee)

"Supply of Electric Point Machine IRS type, 110V DC, Non-trail able, 143 mm stroke as 12 per DRG. no. RDSO/S-10800 complete as per specification no. IRS: S-24/2002 with latest amendment with complete accessories viz. slides for lock & detector, cable termination box, telescopic pipes, tool kit with every 8 point machine" (Inspection by RDSO)

"Electric Point Machine Non-Trailable type confirming to RDSO Specification No. IRS: S-24/2002 amendment No. 1 or latest with following further information. A) 220MM throw with 13 Interlocking for operation of point in Railway yard as per RDSO Drg. No.S- 11000. B) Type of Ground connection with Nylon insulation confirming RDSO Drg. No. S- 3454 & clamp point lock confirming to RDSO Drg. No. 3395 for 60 Kg Thick web switch. C) AC immunity level of Motor for Electric Point Machine should be of 400V (r.m.s) 50HZ. The external colour of Electric motor shall be painted with Red colour." (Inspection by RDSO)

C2-Various Signalling Works in connection with TRR and CTR work on

Supply of Drill bit 7.2mm make JK/ ITI (Inspection by Consignee)

Supply of High speed ratchet type drill bit. Size- 13 mm dia. Full length 145 mm flute Excise Duty -length 90 mm as per IS specn. IS: 503 DIN 345 square shank. Make - IT/MIRANDA/ JK, HSN code - 8207 (Inspection by Consignee)

Supply of High speed ratchet type drill bit. Size-13 mm (Inspection by Consignee)

Supply of Electric drill machine 13 mm impact power input 550- W no load speed 1200 RPM drilling capacity 13/25/210, make- KPT CAT No.KPT563 or Bosch make. (Inspection by Consignee)

Supply of Light Weight Rail Drilling Machine Drill Bit Tungsten Carbide Tipped Size- 22 MM Dia X 50 MM Long with Ejector pin. Accepted offer Make/ Brand BDS Make" (Inspection by Consignee)

Supply of Cycle drill machine hand operated parallel type (Inspection by Consignee)

"Supply of Battery operated rail core drill along with additional 18 mm TCT rail core drill. Maximum core cutting capacity 36mm, rated speed 250/450ZRPM, Battery type Lion, Battery 7 voltage 50V,Battery pack capacity 4AH,Number of battery supplied - 2No. Charger-1No. Special design pressurized internal spindle cooling to give maximum life of core cutter by avoiding heating.3 sets of 22,13,16,7.2 gauge drills adapters to be provided along with the machine,weight of machine with battery18.5Kg Make :Eibenstok, Bosch, KPT " (Inspection by Consignee)

Supply and installation of SMPS based Battery Charger 230V AC Single phase 50HZ supply, output voltage 160V to 190V DC/40A for Point machine operation and suitable to charge 90 cells of VRLA batteries. Make:Statcon or Amara Raja or HBL. (Inspection by RDSO)

Wheel Detection Sensor (External type) consisting of TX and R X coil - Individual Module of Track device /wheel Detection Equipment for MSDAC as per RDSO/SPN/176/2013 VER.3 SIEMENS(DP),SIEMENS MAKE. (Inspection by RDSO)

Supply of CEL make Tx & Rx coils for SSDAC as per RDSO specification No. DSO/SPN/ 177/2012 ver.3 or latest( Each set consists of 2 Nos.Tx & 2 Nos. Rx coils PHASE Reversal type (Inspection by RDSO)

"Electric Point Machine Non-Trailable type confirming to RDSO Specification No. IRS: S-24/2002 amendment No. 1 or latest with following further information. A) 220MM throw with 11 Interlocking for operation of point in Railway yard as per RDSO Drg. No.S- 11000. B) Type of Ground connection with Nylon insulation confirming RDSO Drg. No. S- 3454 & clamp point lock confirming to RDSO Drg. No. 3395 for 60 Kg Thick web switch. C) AC immunitylevel of Motor for Electric Point Machine should be of 400V (r.m.s) 50HZ. The external colour of Electric motor shall be painted with Red colour. (Inspection by RDSO) "

Supply of True RMS Multimeter Fluke Make model 289/Kyoritsu KEW 1061/Stanone SMM 180 (Inspection by Consignee)

Supply of TRMS Datalogging DMM Digital multimeter( Digital multimeter SMM606 stanlay/fluke 179 model/Kyoritsu/KEW/1061) (Inspection by Consignee)

Supply of Digital current clamp meter to measure currents 1 mA to 100 Amps AC/DC Low Current, 4 digit display. Make GTC CM100 or Fluke make. (Inspection by Consignee)

Supply of DIGITAL CLAMP ON EARTH RESISTANCE TESTER RANGE 0.01 TO 1000 OHM Make Brand: MOTWANE/DECT2. (Inspection by Consignee)

Deployment of manpower like unskilled labour to work in emergencies or as requried during cable shifting,finding the existing cable route ,shifting and placing of material in depot etc

Deployment of manpower like skilled labour for supervision and technical support in emergencies or as required during cable shifting, finding the existing cable route etc.

"PVC SHEATHED STAINLESS STEEL WIREROPE 4 MM DIA. DETAIL DESCRIPTION AS PER SIGNAL WORKSHOP, SABARMATI'S DRAWING NO.SW/927. FIRM WILLBE REQUIRED TO FURNISH MANUFACTURER'S GUARANTEE CERTIFICATE. (Inspection by Consignee) "