REPAIRS REPLACEMENTS AND CLEANING OF SEWAGE LINE, GULLY TRAP, SEPTIC TANK, MAN HOLE OVER HEAD TANKS AND REPAIRS REPLACEMENT OF WATER PIPELINES WITH ALLIED SERVICES AT DEFENCE COLONY AND OT ROAD

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I

Taking out deposited sludge by mechanically from sewage sump, septic tank, etc. including pumping out of sewage water from depth n.exc 1.5 m and removing to a distance n.exc 50 m including spreading of bleaching powder @ 1.00 kg per sqm (for disinfections purpose) over sludge before deposited to excavated pit and filled with earth of thickness 15 cm complete all as specified and directed. Note :- Cost of earth work in excation, filling over sludge and cost of bleaching powder shall deemed to be included in unit rate.

All as per Sl Item No. 1.001 above but depth exceeding 1.5 m and n.exc. 3 m.

All as per Sl Item No. 1.001 above but depth exceeding 3 m and n.exc. 4.5 m.

Material, T&P and labour for cleaning of sewage line of any dia / bore using green bamboo/cane stick and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and removing night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines including spreading of bleaching powder @ 1.00 kg per sqm (for disinfections purpose)complete all as specified.

Material, T&P and labour for cleaning of blockage of WC, wash hand basin, floor trap, nahani trap, gully trap, kitchen, bath, etc. (carrying soil waste) in any length upto the first manhole using the cleaning devices as per Rule 5 and protective gear and safety devices as per Rule 4 of the Prohibition of Employment as Manual Scavengers and their Rehabilitation Rules 2013 and removing blockage if any and removing night soil / silted sludge / waste material outside MD land unprohibited by any authority and following the statutory law / guidelines complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.50 m in depth and getting out in soft/loose soil.

Removing excavated material (soil) not exceeding 50 m and depositing where directed at a level n. exc. 1.50 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm as in soft/loose soil complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing unserviceable materials from site of work complete all as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal diameter of pipe 150 mm complete all as specified and as directed.

M&L for (SGSW) drain pipe grade ‘A’ 150 mm internal dia laid in trenches and jointed in CM 1:6 all as specified.

M&L for plain cement concrete PCC (1:4:8) type D-2 ( using 40 mm graded stone aggregate) for bedding to drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

M&L Plain Cement concrete 1:3:6, type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete.

M&L for Plain Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in copings, bed plates etc, including necessary form work complete all as specified.

M&L Plain Cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in surface channel or drains.

M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete

M&L 50 mm thick cement concrete 1:2:4 type B 1 (using 20mm graded stone aggregate) as in pavings, hard standings etc finished even and smooth without using extra cement and making impressions of expanded metal, while concrete is green.

M&L 75 mm thick, cement concrete, type C-2, 1:4:8 (using 40 mm graded stone aggregate) finished even and rough to receive floor topping.

High strength steel deformed TMT bars (Fe 500D) 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

High strength steel deformed TMT bars (Fe 500D) 6 mm to 8 mm dia cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Precast Reinforced Cement Concete type 1:2:4, Type B-1 using 20 mm graded stone aggregate as in cover slab of man holes, septic tank, soak well, etc. set in Cement Mortar (1:6) with plain fair finished including weathering, slightly rounded or chamfered angles, throating, etc. including necessary form, mould work, etc. complete all as specified and as directed.

M/L brick work with flyash bricks old size straight or curved on plan to any radius exc 6m mean radius build in CM 1:4.

Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15 mm thick in cm (1:4) on brick wall, finished even and smooth (with out using extra cement ), all as specified and directed.

Supply only liquid water proofing compound.

M/L preparing of newly plastered surfaces of walls & applying two coats of cement base paint

Cleaning and removing all scale and dirt, etc. from tanks and from mouth of circulating pipes, etc of capacity exc 250 & n exc 500 litres by cleaning/ disinfecting with bleaching power and finally washing with fresh water including writing date of cleaning by synthetic enamel paint complete all as directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouth of circulating pipes, etc of capacity exc 500 & n exc 1000 litres by cleaning/ disinfecting with bleaching power and finally washing with fresh water including writing date of cleaning by synthetic enamel paint complete all as directed.

M&L for Writing letters or figures (Block Roman, Italic or Indian) n exc. 30 cm height

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store.

Taking up or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store.

S&L Chlorinated Polyethylene Chloride (CPVC) pipes 20 mm outside dia, SDR 11 (IS 15778) and Plain CPVC SDR 11 including all special fittings (brass threaded elbow, tee, unions, etc.) polypropylene random fittings on walls / ceiling or laying in floors complete all as specified.

S&L Chlorinated Polyethylene Chloride (CPVC) pipes 25 mm outside dia, SDR 11 (IS 15778) and Plain CPVC SDR 11 including all special fittings (brass threaded elbow, tee, unions, etc.) polypropylene random fittings on walls / ceiling or laying in floors complete all as specified.

Brass Elbow 20mm dia

Brass Elbow 25mm dia

L Brass Elbow (3/4 X ½

M Brass Tee 20mm

M Brass Tee 25mm

Male Brass Threaded Adaptor (MTA/ MBTA) ) for 20mm

Male Brass Threaded Adaptor (MTA/ MBTA) ) for 25mm

Female Brass Threaded Adaptor (MTA/ MBTA) ) for 20mm

Female Brass Threaded Adaptor (MTA/ MBTA) ) for 25mm

Union 20mm

Union 25mm

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15 mm with new fittings.

Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20 mm with new fittings.

S&F Galvanised steel water tubing 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete to wall/in chases and ceiling or laid in floors including fixing complete.

S&F Galvanised steel water tubing 20 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete to wall/in chases and ceiling or laid in floors including fixing complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal diameter of pipe 100 mm complete all as specified and as directed.

S&F PVC (SWR) soil, waste and vent pipe, single socketed, 110 mm bore in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F PVC (SWR) bend any radius with access door for 110 mm bore pipe.

Dismantling water storage tank of capacity exceeding 250 litres but not exceeding 500 litres and removing from site complete all as specified and as directed.

Dismantling water storage tank of capacity exceeding 500 litres but not exceeding 1000 litres and removing from site complete all as specified and as directed.

Supplying, hoisted and fixed in position of rotational moulded polyethylene water storage tanks in double layers and cylindrical vertical type with manhole lids (closed top) of 500 litres capacity with ISI marked and all as specified in IS 12701 complete all as specified and directed. Make-Sintex/Polycon/Polyfoam

Supplying, hoisted and fixed in position of rotational moulded polyethylene water storage tanks in double layers and cylindrical vertical type with manhole lids (closed top) of 1000 litres capacity with ISI marked and all as specified in IS 12701 complete all as specified and directed. Make-Sintex/Polycon/Polyfoam

S&F Ball valve high pressure of PTMT with epoxy coating aluminium rod and high density plastic ball screwed for iron pipe and fixed to 20 mm bore pipe (minimum weight 210 gm) complete all as specified and as directed.

Removing of plants and shrubs including roots by dismentling of brick work, PCC / RCC work including necessary scaffolding any type in any location / position i.e. roof, parapet wall, around pipes, etc. and applying applying plant / shurb growth resistance chemical after removal of roots from effected area of wall and making good the disturbed area with PCC 1:2:4, Tyoe B-0 and applying 10 mm thick plaster in cement mortar 1:3 complete all as specified and as directed.

SCHEDULE 'A' PART-II Note : Relevant items required for the execution of items covered under this part shall be measured and paid under Schedule ‘A’ Part-I.

Cutting of existing PCC work, pathway, road, any type of tile work not more than 50cm width and 90cm depth including making good and matching to the existing surface and removing the debris to a distance not more than 50m from the site complete all as specified and as directed by the Engr-in-Charge.

Material and labour cast iron sluice valve with flanged ends heavy duty of class PN 1.6 ISI marked, drilled for bolts comprising of gun metal spindle cast iron operating wheel, including necessary rubber gasket joint complete with nuts bolts and washer for 150 mm dia bore.

Material and labour cast iron sluice valve with flanged ends heavy duty of class PN 1.6 ISI marked, drilled for bolts comprising of gun metal spindle cast iron operating wheel, including necessary rubber gasket joint complete with nuts bolts and washer for 100 mm dia bore.

Material and labour cast iron sluice valve with flanged ends heavy duty of class PN 1.6 ISI marked, drilled for bolts comprising of gun metal spindle cast iron operating wheel, including necessary rubber gasket joint complete with nuts bolts and washer for 80 mm dia bore.

Taking up the deterinated/leakage GI pipes & connected defective GM gate valves/ stop valves etc. of any size from trenches/ floors of different sizes for cleaning/ refixing/ replacing with necessary fittings and valves etc. for 100 mm bore pipe complete all as directed.

Taking up the deterinated/leakage GI pipes & connected defective GM gate valves/ stop valves etc. of any size from trenches/ floors of different sizes for cleaning/ refixing/ replacing with necessary fittings and valves etc. for 80 mm bore pipe complete all as directed.

Taking up the deterinated/leakage GI pipes & connected defective GM gate valves/ stop valves etc. of any size from trenches/ floors of different sizes for cleaning/ refixing/ replacing with necessary fittings and valves etc. for 50 mm bore pipe complete all as directed.

Taking up the deterinated/leakage GI pipes & connected defective GM gate valves/ stop valves etc. of any size from trenches/ floors of different sizes for cleaning/ refixing/ replacing with necessary fittings and valves etc. for 40 mm bore pipe complete all as directed.

Taking up the deterinated/leakage GI pipes & connected defective GM gate valves/ stop valves etc. of any size from trenches/ floors of different sizes for cleaning/ refixing/ replacing with necessary fittings and valves etc. for 25 mm bore pipe complete all as directed.

Taking up the deterinated/leakage GI pipes & connected defective GM gate valves/ stop valves etc. of any size from trenches/ floors of different sizes for cleaning/ refixing/ replacing with necessary fittings and valves etc. for 20 mm bore pipe complete all as directed.

S&F Galvanised steel water tubing 100 mm bore, medium grade with all fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts, caps, plugs and unions etc.) laying in trenches/ floors/ ducts including scfording works and also cutting pipes, screwing, and for making forged bends on piping as required and complete all as specified and directed.

S&F Galvanised steel water tubing 80 mm bore, medium grade with all fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts, caps, plugs and unions etc.) laying in trenches/ floors/ ducts including scfording works and also cutting pipes, screwing, and for making forged bends on piping as required and complete all as specified and directed.

S&F Galvanised steel water tubing 50 mm bore, medium grade with all fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts, caps, plugs and unions etc.) laying in trenches/ floors/ ducts including scfording works and also cutting pipes, screwing, and for making forged bends on piping as required and complete all as specified and directed.

S&F Galvanised steel water tubing 40 mm bore, medium grade with all fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts, caps, plugs and unions etc.) laying in trenches/ floors/ ducts including scfording works and also cutting pipes, screwing, and for making forged bends on piping as required and complete all as specified and directed.

S&F Galvanised steel water tubing 25 mm bore, medium grade with all fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts, caps, plugs and unions etc.) laying in trenches/ floors/ ducts including scfording works and also cutting pipes, screwing, and for making forged bends on piping as required and complete all as specified and directed.

S&F Galvanised steel water tubing 20 mm bore, medium grade with all fittings (such as bends, elbows, tees, short pieces of medium grade , connectors, back-nuts, caps, plugs and unions etc.) laying in trenches/ floors/ ducts including scfording works and also cutting pipes, screwing, and for making forged bends on piping as required and complete all as specified and directed.

Supply and fixing Gun-metal, gate valves for 50 mm bore pipe, with iron wheel head, screwed both ends on G.I pipes with GI union, including removing old unserviceable ones all as per directed. Make : Audco/Zoloto/Leader/Kirloskar/Venus.

Supply and fixing Gun-metal, gate valves for 40 mm bore pipe, with iron wheel head, screwed both ends on G.I pipes with GI union, including removing old unserviceable ones all as per directed. Make : Audco/Zoloto/Leader/Kirloskar/Venus.

Supply and fixing Gun-metal, gate valves for 25 mm bore pipe, with iron wheel head, screwed both ends on G.I pipes with GI union, including removing old unserviceable ones all as per directed. Make : Audco/Zoloto/Leader/Kirloskar/Venus.

Supply and fixing Gun-metal, gate valves for 20 mm bore pipe, with iron wheel head, screwed both ends on G.I pipes with GI union, including removing old unserviceable ones all as per directed. Make : Audco/Zoloto/Leader/Kirloskar/Venus.

Supply and fixing for 150 mm bore CI non return valve heavy duty, flanged type, PN 10 including all accessories after and including taking up of old unserviceable non return valve complete all as specified and as directed. Make : Leader/IVC/Venus/Kejriwal Castings.

Supply and fixing for 100 mm bore CI non return valve heavy duty, flanged type, PN 10 including all accessories after and including taking up of old unserviceable non return valve complete all as specified and as directed. Make : Leader/IVC/Venus/Kejriwal Castings.

Supply and fixing for 80 mm bore CI non return valve heavy duty, flanged type, PN 10 including all accessories after and including taking up of old unserviceable non return valve complete all as specified and as directed. Make : Leader/IVC/Venus/Kejriwal Castings.

Supply and fixing for 150 mm dia cast iron butter fly valve IS-13095-1991 including all accessories after and including taking up/down of old unserviceable valve complete all as specified and as directed. Make :- Advance/C & R/ Audco/IVC/Venus

Supply and fixing for 100 mm dia cast iron butter fly valve IS-13095-1991 including all accessories after and including taking up/down of old unserviceable valve complete all as specified and as directed. Make :- Advance/C & R/ Audco/IVC/Venus

Supply and fixing for 80 mm dia cast iron butter fly valve IS-13095-1991 including all accessories after and including taking up/down of old unserviceable valve complete all as specified and as directed. Make :- Advance/C & R/ Audco/IVC/Venus

Supply and fixing for 50 mm dia cast iron butter fly valve IS-13095-1991 including all accessories after and including taking up/down of old unserviceable valve complete all as specified and as directed. Make :- Advance/C & R/ Audco/IVC/Venus

Construction of brick massonry valve pit chamber of inner dimension 100x100x90 cms suitable for sluice valves upto 100mm size, with PCC 1:4:8 type D-2 for foundation, brick work in cm 1:6 rendering 1:4, 15mm plastering, coping in PCC 1:2:4 type B-1, incl necessary earth work in soft/loose soil, including MS sheet cover of thickness 3.15mm on 50x50x6.0 mm angle iron framework including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement including demolished old valve pit complete all as specified and directed.

Disconnecting the electric supply from panel board and taking out/lifting all coloumn pipes flanged/socket type 80 mm and submersible pump of capacity upto 20 HP from existing bore well by means of chain pully block and keeping serviceable fittings in safe custody for reuse/removing U/S materials from site/ making good disturbed surfaces after devlopment of bore well ,complete all as directed and specified.

M&L for run lead joints including jointing materials suitable for 150 mm bore CI pipe line in existing position including taking out old leads complete all as directed.

Supply only MS column pipes of 03(three) meter heavy duty 100 mm dia bore, both end threaded with heavy duty socket or fixed with two Nos flanges on both end, including welding ( both inside and outside) and drilling holes on flanges as per existing size/ granding etc. and painting with two coat of back anti- corresive synbthetic paint(suitable for drinking water) on of column pipes over two coat of red oxide primer shall be painted with electrical spray machine all as specified and directed.

Supply only MS column pipes of 03(three) meter heavy duty 80 mm dia bore, both end threaded with heavy duty socket or fixed with two Nos flanges on both end, including welding ( both inside and outside) and drilling holes on flanges as per existing size/ granding etc. and painting with two coat of back anti- corresive synbthetic paint(suitable for drinking water) on of column pipes over two coat of red oxide primer shall be painted with electrical spray machine all as specified and directed.

Supply and fixing for 80mm dia CI Foot Valve conforming to IS 4038 any type inclueding all accessories after and including taking up of old unserviceable foor valve complete all as specified and as directed by the Engr-in-Charge. Make : Kalpana/Venus/BIR/Kejriwal Castings.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete.

M&L Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 METRE mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Fair Faces of Brick Work or Concrete Surfaces, Plastered Surfaces finishing Fair and Even, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for.

M & L Cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete.

M & L Cement concrete 1:2:4, type B-2 (using 40 mm graded stone aggregate) of 100 mm thick.

M & L Cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) of 50 mm thick.

Supply only aquafit-chlorine -65%-70%, (Calcium based granular disinfectant for water treatment , in 45 KG Drums.(Make : Aquafit Chlorine)

Cleaning/ washing internal surfaces over head reservoir capacity 40,000 to 1,00,000 gallon of 20 Mtr staging draining out of the complete water from the tank through wash out valve, removing the sand particle from bottom by means of bucket, brooms etc rubbing the all inside wall of the tanks and removing the unhygienic organisms etc wash out the whole water through wash out valve, removing all remaining water by means of bucket brooms etc including writing with black paint on over head reservoir wall-date of cleaning etc all as directed.

M&L for rewinding of submersible motors AC, 3 phase, 440 volt for 15 to 20 HP with superior quality PVC insulated copper submersible winding wire of identical gauge and specification of the existing short circuited winding wires with all necessary insulating materials including cleaning of stator and slots and applying one coat of water proof epoxy paint to the exteriors of motor and testing complete all as specified and directed . NOTE: (i) New Copper wire will be used for rewinding measured under this relevent items. (ii) Cost of labour charges for fixing of new or old serviceable parts are deemed to be included in unit rate under this item.

Comprehensive maintenance of submersible pump of 6 to 8 stage,20/15 HP installed at pump house with cleaning,Stage casing,Carbon trust bearing with pressure plate,Suction strainer, Diffuser Bronze, Impellers,Thrust bearing housing, Bearing segment carrier (C.I), Diaphragm (rubber), Stud nut and bolt 8.0mm dia and length as per requried, Greasing,repairs to pump including replacement of spares parts like clamps,Impeller bushing,Dischrage/suction casing,Gaskets etc & connected accessories all as directed.

Comprehensive maintenance of centrifugal pump,3HP installed at swage pump house with cleaning, Greasing,Minor repairs to pump & motor including replacement of spares parts like clamps, Shaft sleeve DE/NDE,Catridge for DE/NDE Bearing,Water ring,Inter Stage Ring,PVC Air Vent ,Air release nozzles of brass for pump,Water deflector,impeller check nut,Bearing check nut,Fan blade (PVC), Body stud Bolt & Nuts, Split Glang DE/NDE,Coupling PVC Bush,S Nuts and Bolts of iron full thread with washers,Gaskets & etc & connected minor accessories all as directed.

Comprehensive maintenance of centrifugal pump,10HP installed at swage pump house with cleaning, Greasing,Minor repairs to pump & motor including replacement of spares parts like clamps, Shaft sleeve DE/NDE,Catridge for DE/NDE Bearing,Water ring,Inter Stage Ring,PVC Air Vent ,Air release nozzles of brass for pump,Water deflector,impeller check nut,Bearing check nut,Fan blade (PVC), Body stud Bolt & Nuts, Split Glang DE/NDE,Coupling PVC Bush,S Nuts and Bolts of iron full thread with washers,Gaskets & etc & connected minor accessories all as directed.

M&L for fully automatic star delta starter, 15- 20 HP capacity, 3 phase 440 volt complete with over load protection with adjustable relay range, electronic timer relay and provision of MS flat strips of suitable size and shape duly drilled and embedded to wall including making good disturbed surfaces including taking down old star delta starter complete all as specified. (Make: L&T/BCH / Havells)

M&L painting steel and iron surface of any description such as rising and down pipe of over head reservoir valve pit cover distribution mains etc and applying two coat of synthetic enameled paint including preparation of old surface.

M&L for opening of Iron removal plant's top iron cover and removal of sluges inside the chamber area,cleaning, rubbing inside the chamber area and removal all the rusted materials. Applying of two coats of water proof paints over a coat of primer and filling with new filter media to fulfill the level with concern like lime, magnesium- di -oxide as per required quantity (appx 8.5 Kg) close the top iron cover with necessary packing materials like gasket ,nutbolt ,etc and painting outer surface of the iron removal plant with one coat of synthetic enanel paint all as directed by Eng-in-charge.

Supply only of Gravells 3/4 x 1/2

Supply only of Gravells 1/2 x 1/4

Supply only of Gravells 1/4 x 1/8

Supply only of Gravells 1/8 X 1/16

Supply only of Gravells 10 x 20

Supply only of Gravells 16 x 30

Supply only of Mno2

Supply only of Fine Sand

Supply and fixing 3/8'' white sunction and discharge tubing for dosing plant complete all as specified and directed.

Supply and fixing Ferrule 1/4" for dosing pump complete all as specified and directed.

RANA ENTERPRISES

DS ENTERPRISES

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

vaishnaveedevienterprises