Special Repair and maintenance of fiber factory at Kiltan

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sqm and below .

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-Ist class Karimaruth/Ayini/Irul ( hold fast lugs or dasg fastener shall be paid for separately )

Providing 40 x5 mm Iron hold fast 40 cm long including fixing to frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size )

Providing and fixing 35mm thick panelled , glazed or panelled and glazed shutters for doors, windows and clestory windows including anodised aluminium butt hinges with necessery screw first class karimaruth /Ayni / Irul. Including 4mm thick float glass panes.(double leaf shutter)

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.300x16mm

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete..225x10mm

Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Providing and fixing anodised Aluminium hooks and eyes anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.(Birla/JK)

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade One or more coats on old work.. (Asian Paint /Berger/Nerolac)

Painting Wood work with Deluxe Multi surface paint to give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture. (Asian Paint /Berger/Nerolac)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately):For fixed portion.Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Prelaminated particle board with decorative lamination on both sides.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-chargs.With brass cover plate minimum 1.25 mm thickness

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler,jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer -in-charge but excluding the cost of painting with:e.12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I,

Reinforced cement concrete 1:1.5:3 ( 1 cement: 1.5 M.Sand: 3 granite chips 20mm nominal size) excluding cost of centring and shuttering and reinforcement All work up toplinth level.Foundation fooltings bases of column etc, and mass concrete.

Cold twisted steel reinforcement for R.C.C. work including bending, binding and placing in position complete.

Centring and shuttering including strutting, propping etc. and removal of form for :Foundation fooltings bases of column etc, and mass concrete.

Providing Aluminium sheet roofing fixed with .galvnized iron Jor L hooks and 8mm dia C.I plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick.

OP ASHRAF