Maintenance work (Surface dressing, Jungle cleaning, drain cleaning, painting and other miscellaneous work) for three years in abadi plots village Birondi Sector Ecotech-I and 60 m wide road from Honda Siel junction to Delphi rotary, Greater Noida.

Cleaning jungle including up rooting of rank, vegitations grass, push, wood trees and samplings of grith upto 30 cms. Measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50 M. out side the periphery of area cleared. (SOR-20/4.06/259(i)) Same as above 259(i) above but grass only. (SOR-20/4.06/259(a))

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m. All kinds of soil. (DSR-2018/2.28.1/AR)

Tractor with trolley including POL and driver. (SOR-20/Ch-2/SI. No. 19)

Supply of labour. (SOR-20/Ch-2/SI. No. 12)

Excavation in foundation in ordinary soil (Lorm,Clay or sand ) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removel and disposal of surplus earth as directed by the engineer incharge upto distance of 30 M.from the foundation trenchess.( where machine con not reach / move ). (SOR-20/4.01/251(a))

Extra rates for quantities of works, executed: In or under water and/or liquid mud, including pumping out water as required. (DSR-18/2.24.1/AR)

Cartage of earth or fly ash when added to schedule item no. 253 : 1st Km. (If lead is beyond 1/2 Km.). (SOR-20/4.08/261(b))

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/5.08/281)

M-150 Brick Work in 1:6 cement & fine sand 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. Same as item no. 303 but in 1:4 one cement & 4 fine sand of 1.25 F.M. mortar. (SOR-20/6.05/305) Same as item no. 305 but in 1:4 one cement & four Coarse sand of 2.20 F.M. mortar. (SOR-20/6.05/305(a))

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/5.06/279) Same as above item no. 279 but with 2 cm. gauge stone grit instead of 4 cm. gauge stone ballast. (SOR-20/5.07/279(a))

12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand). (DSR-18/13.4.2/AR)

Plain/Reinforceed cement concrete in open foundation complete as per drawing and technical specifiations. PCC Grade M25 using batching plant transit mixture and manual placing. MoRTH-20/9.06/D/Case-II

Plain/Reinforceed cement concrete in open foundation complete as per drawing and technical specifiations. PCC Grade M25 using batching plant transit mixture and manual placing. MoRTH-20/9.06/D/Case-II

Steel Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo mechanically treated barsof grade Fe-500D or more. (DSR-18/5.22.6/AR)

Providing and fixing SFRC Cover over chamber. (without frame) 50mm thick. Size: 600x600mm (Heavy duty)

Providing and fixing SFRC Cover over chamber. (with frame) 50mm thick. Size: 600x600mm (Heavy duty)

Tractor with water tanker with cost of water including P.O.L. (SOR-20/Ch-2/SI. No. 27)

Providing JCB with driver and including POL (SOR-20/Ch-2/SI. No. 31)

Excavation in foundation in ordinary soil (Lorm,Clay or sand ) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removel and disposal of surplus earth as directed by the engineer incharge upto distance of 30 M.from the foundation trenchess.( where machine con not reach / move ). (SOR-20/4.01/251(a))

Supply and Fixing R.C.C. Direction board size 200x510x80mm mixing 1:1.5:3 including reinforcement all complete for completion of the work as per direction of engineer-in-charge. (AR/GNIDA)

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/5.06/279) Same as above item no. 279 but in proportion of 6:3:1. (SOR-20/5.07/280)

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. paint to be used should confirm ISI no. 105/106/133-1950 (SOR-20/15.07/647)

Repainting letters 2.5 cm. size including supply of all materials, labours & tools and plants etc. required for proper completion of the work. (SOR-20/21.05/820) As in item 820 above but size above 2.5 cm. but up to 8 cm. (SOR-20/21.06/821)

Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). (DSR-2018/16.85/AR)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-2018/16.69/AR)

Supplying at site :R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in charge (cost of earth works in excavation, concrete works in foundation to be paid separately). DSR-18/16.15.1/AR

Fencing with RCC post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire. DSR-18/16.17.1/AR

White washing one coat including supply of all materials, labour, tool & Plants etc. required for proper completion of the work, (SOR-20/6.01/671)

Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. paint to be used should confirm ISI no. 105/106/133-1950 (SOR-20/15.07/647)

Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. DSR-18/13.100.1/AR

Labour Cess will be paid extra as per applicable

GST will be paid extra as per applicable