CONSTRUCTION OF VIP TOILET BLOCK ON SCHOOL PLAYGROUND AT RMS CHAIL UNDER GE (I) JUTOGH

Amount

M&L for surface dressing n exc 15 cm deep in hard/dense soil including removing bushes/ small trees etc., complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and not exc 1.5 m deep for foundations, etc or removing the earth from existing drain and getting out (hard/ dense soil), complete all as specified and directed.

Returning, filling in, including levelling , watering and well ramming in layers n exc 25 cm thick in soft/ loose soil, complete all as specified and directed.

Removing excavated material n exc 50mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soils, complete all as specified and directed.

M&L for PCC 1:4:8, type D-2, using 40 mm graded crushed stone aggregate) as in foundation, complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radious built in CM 1:4, complete all as specified and directed.

M&L for 50mm thick, PCC 1:3:6, type C-1, using 20mm graded crushed stone aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for stone coated roof tiles 0.55mm thick and length varies from 1300mm to 1400mm and width 420mm used as in roof complete all as specified and directed. Note: Colour of Roof tile as approved by GE.

S&F structural steel framed work as in roof/ ceiling or gate frame of angle, railings or other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering etc Fe-410W (Gde-E-250), quality-A, at any height, complete all as specified and directed.

M&L for plain fillets, square, rectangular or triangular in section, and secured with nails or brads, using IInd class hard-wood clean sawn in sectional area exc 13 sq.cm and not exc 25 sqcm, complete all as specified and directed.

M&L for providing and fixing 10mm thick plaster of paris ceiling (gypsum anhydrous) to flat surface over and including 2nd class soft wood fillets, or metal frame work and reinforced with GI wire mesh complete all as specified and directed

M&L for RCC 1:1.5:3, Type A-1, nominal mix, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for 20mm thick granite slab (of any type) work (table rubbed and polished) in plateform,urinal prtition and the like in 15mm CM 1:4, including pointing in white cement 1:2, using marble dustand admixture of pigment to match the shade of granite including circular cutting or notching for fixing WHB and counter, complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar 1:4, on brick or concrete surface with water proofing compound finished even and smooth without using extra cement, complete all as specified and directed.

M&L for prepration of newly plastered surfaces of wall and and applying two coats of Anti Fungal weather proof exterior emulsion paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for maroom/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregate 75mm thick as in sub base of flooring, complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate to receive the top layer of tiles, complete all as specified and directed.

M&L for Non-Skid coloured ceramic tiles/ Matt finish 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc., complete all as specified and directed.

S&F Glazed ceremic coloured tiles of size 300 mm x 450 mm x 7mm/250x350x7mm thick as in dados, skirting, wall etc set jointed and pointed in coloured cement to match the tiles over 10 mm thick rendering in CM 1:4, complete all as specified and directed.

S&F for 110 mm PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

S&F PVC (SWR) bends 110 mm , complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore, complete all as specified and directed.

S&F powder coated aluminium sliding door shutter of double leaf having section of top, lock, bottom rail and style of size 114x45x3mm including necessary supply and fixing of sliding channel of section 40x40x6mm (heavy duty) fixed at top of the shutter and guide(U shape) rail with U channel and wheel of size 40x6mm fixed on U channel and for sliding purpose (Length of sliding channel is equal to the width of double the width of two leaf) including necessary fittings, joinery cleat, 5 mm thick figured glass in upper half i.e. from lock rail to top rail (half of glass glazing) and lower half i.e. from lock rail to bottom rail fitted with aluminium composite panel of thickness 5 mm, packing with snap beading 10mmx10mm, powder coated aluminium handle 250mm (2 Nos for each shutter), mild steel mortice lock of 100 mm size including frame of size 100mmx45mmx3mm complete all as specified complete all as specified and directed. Make of aluminium door:Axsys, Jindal, Kalco, Alpure. Make of Aluminium composite panel( ACP): Indobond Jalandhar,Aldeko Delhi, Eurobond Mumbai Make of mortice lock : Harrison, Godrej, Bharat Note: For payment purpose the clear opening size shall be measured.

S&F aluminium powder coated partition with glazing/ventilator, fixed type (size of each fixed panel n.exc 1sqm), having aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Make : Axsys, Jindal, Kalco, Alpure Note: i) Glass panes shall be measured and paid separately. ii) For payment purpose area of clear opening shall be measured.

S&F 5mm thick figured glass, pin headed type and glazing with oil putty in squares exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F CP grating 125mm dia fixed, complete all as specified and directed.

S&F 150mm dia SGSW gully trap setting and jointing with cement joint complete all as specified and as directed.

Supply and laying of 16mm CPVC pipes, SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

Supply and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and as directed.

S&F Brass Elbow 16mm bore, complete all as specified and as directed.

S&F Brass Elbow 20mm bore, complete all as specified and as directed.

S&F Union 16mm bore, complete all as specified and as directed.

S&F Union 20mm bore, complete all as specified and as directed.

S&F 500 litre Rotational moulded polye- thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and as directed.

S&F ball brass valves , high pressure , with polythene float and flynut complete, screwed for 20mm iron pipe or brass ferrule, complete all as specified and directed.

S&F 15mm bore bib tap, long body fancy type cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed. Make : Jaquar (Continental) Cat No-CON-107KN or equivalent in makes as approved by GE..

S&F 15mm bore basin spout with two concealed stop cocks (composite one piece body) complete all as specified and as directed. Make: Jaquar (Cat No :OPP-15433PM or equivalent in makes as approved by GE.

S&F 15mm bore stop cock/Angle cock with wall flange, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends, concealed type fixed to iron pipe cast copper cormium plated screwed down high pressure and fixed complete all as specified and as directed. Make: Jaquar (Queens prime) Cat No:QQP-7053PM or equivalent in makes as approved by GE.

S&F concealed flushing system i.e I- flush 32mm complete all as specified and directed. Make: Jaquar Cat No : FLV-1073C or equivalent in makes as approved by GE.

S&F Exposed Part Kit of i Flush with Dual Flush Push Button Actuation & control stop cock complete all as specified and directed. Make: Jaquar Cat No : FLV-1075NK or equivalent in makes as approved by GE.

S&F chromium plated towel rack 600mm (24") size without lower hangers but with 3 hooks, Stainless Steel and including chromium plated brass screws and wooden/plastic cleats, approved quality complete all as specified and directed. Make: Jaquar (Continental Accessories) Cat No: 1181FHS or equivalent in makes as approved by GE.

S&F soap dispenser with metallic bottle, complete all as specified and as directed. Make: Jaquar (Continental) Cat No ACN1137N or equivalent in makes as approved by GE..

S&F toilet roll holder with stainless steel flap fixed to walls with chromium plated (CP) brass screws, complete all as specified and as directed. Model No CAN-1153S Make :- Jaquar or equivalent in makes as approved by GE.

S&F towel ring round with round flange chromium plated fixed with brass screws and rawl plug complete all as specified and as directed. Model No ACN-1121BN. Make :- Jaquar or equivalent in makes as approved by GE.

S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. Model No CPA-1171 Make:- Jaquar or equivalent in makes as approved by GE.

S&F looking mirror 5 mm thick bevelled edge mirror of selcted quality glass, with edge designed with wooden beadings mounted and fixed to PVC plugs with chromium plated brass Studs complete all as specified and as directed.

S&F hand shower (health faucet) with 1 Meter long easy flex tube & wall hook complete all as specified and as directed. Model No ALD-565. Make :- Jaquar or equivalent in makes as approved by GE.

S&F wall hung WC of size (360x500x330 mm) with UF soft close slim seat cover, hinges, accessories set complete all as specified and as directed. Model No KUS-WHT-35953BIUFSM. Make :- Jaquar or equivalent in makes as approved by GE.

S&F counter top WHB of size (600x400x185mm) with fixing accessories including bottle trap complete all as specified and as directed. Model No SLS WHT-6601. Make :- Jaquar or equivalent in makes as approved by GE.

M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through concealed PVC conduit 25mm wiring with all fittings and accessories, terminated to sunken box and laminated sheet of suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light/fan point control by one, one way switch complete all as specified and as directed .

All as per Srl item No 52.00 above but for one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed

All as per Srl item No 52.00 above but for one 3 pin socket oulet 5 amps, on independent board, complete all as specified and directed

All as per Srl item No 52.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm complete all as specified and directed

All as per Srl item No 52.00 above but for one 3 pin 15 Amps power point on independent board with 4.0 Sqmm complete all as specified and directed

S & F Modular switch 1 way 6 A, module complete all as specified and directed

S & F Modular switch 1 way 16 A, module complete all as specified and directed

S & F modular Socket, 6A-2/3 pin combined 2 module complete all as specified and directed

S & F modular Socket, 6A/16A-2/3 pin combined 2 module complete all as specified and directed

S&F white cover plate with frame 2 Module complete all as specified and directed

S&F white cover plate with frame 4 Module complete all as specified and directed

S&F white cover plate with frame 8 Module complete all as specified and directed

S&F for Metal flush box 2 module complete all as specified and directed

S&F for Metal flush box 4 module complete all as specified and directed.

S&F for Metal flush box 6/8 module complete all as specified and directed.

S&F ceiling rose ,3 phase ,PVC polycarbonate ,insulated body (ISI Marked) complete all as specified and directed.

M&L for lamp holder (Angle) PVC/Polycarbonate type with back plate suitable for batten fittings incl 14 Watt LED Lamp complete all as specified and directed.

S&F LED tube light along with fixture, 1x 20 watt, (4 Feet) wall mounted LED battern, integrated electronic driver with heat sink provided for efficient heat dissipation, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F LED tube light along with fixture, 1x 10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements, complete all as specified and directed.

S&F LED Bulkhead luminaire 20W Decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed

S&F LED building securtiy light 40 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

M&L for submain wiring with 2 x 6 Sqmm+1 x 6 Sqmm Earth Wire single core PVC insulated (FRLS-H) PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement and direction by EIC, with all accessories complete all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length, complete all as specified and directed.

S&F sheet metal enclosure MCB DB 12 way SPN double door suitable for 240 V fixed flused on walls including cutting Knitch and making good disturbed surfaces complete all as specified and directed

S&F MCB SP (single pole ) 06 to 32 Amps 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F MCB SPN/ DP (single pole & neutral) 240 volt 63 amp 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size, complete all as specified and directed.

S&F MCB protected socket 15/20 Amp including 25 Amp MCB suitable for domestic and commercial uuse gyeser with PVC box, sheet steel enclosure (ISI marked) flush type complete all as specified and directed

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc and fixing arrangements complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including fixing all arangements complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including galvanised strip protected by 32mm bore light grade galvanised iron pipe and earth and connected to test point as directed including funnel, watering pipe 20mm bore light grade galvanised iron wire mesh charcoal and common salt in alternate layers of 15cm compacted thickness all arround the GI electrode with concrete pit in PCC 1:3:6, type C-1, including necessary excavation in soft/loose soil and disposal of soil to a distance not exc 50 m and necessary testing complete connected to earthing test point complete all as specified and directed.

KATWAL TECHNOCRATS (BID ID -3352885)