REPAIR/MAINTENANCE TO COMPOUND WALL , FENCING, PATH, HARDSTANDING, AREA DRAINS, ETC AT ZONE B AREA UNDER AGE(I) NAVY CHENNAI

Amount

Dismantling of fencing wire mess of any type and any description including any position complete complete all as specified and as directed by Engineer-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in concrete portion and making good disturbed ground complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc

Demolition of brickwork or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles and removing rubbish from the site complete all as specifiedn and as directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface (Soft/loose soil)

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in Post holes complete all as specified and directed by Engineer-in-charge. Note:- Portion of RCC post embedded shall be deducted.

S&F of Mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde E- 250) quality A complete all as specified and directed by Engineer-in-charge.

S&F mild steel framed work as in doors or gates of angle or other section with gusset plates , rails braces ,drilled for fixing of steel sheeting & incl. & hinges complete incl. mild steel plain black sheet in wall cladding, cut to size, holes punched,incl. round headed screws or rivets with plain 40mm lap

M&L for Mild Steel TMT Bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hoping ends and binding with mild steel wire annealed not less than 0.90 mm dia as in reinforcement.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n. exc. 10cm long complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of New steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed.

Material and labour for preparation of Old steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer exposed to view surfaces complete all as specified and as directed.

S&F Chain link MS galvanisd fencing, any only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Taking down cement plaster on brick or stone wall etc. including racking out joints,hacking for key and secrubbing down with water etc. complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brick wall or concreete surface in CM (1:4) finished even and smooth complete all as specified and directed by Engineer-in-Charge.

M&L for Integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing applying at site one coat primer and two coats of BERGER-WALMASTA EMULSION or equivalent as specified in PS of approval colour by Smart painting technology including surface preparation complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing applying at site one coat primer and two coats of BERGER-WALMASTA EMULSION or equivalent as specified in PS of approval colour applying by Smart painting technology including complete removal of existing coating complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in Soft/loose soil complete all as specifiedn and as directed by Engineer-in-Charge.

M&L for Brickwork with Old size fly ash bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:6 complete.

M&L for Providing cement concrete of type B1, 1:2:4 (20mm graded aggregate) as in Benching/coping,lintels upto 1.5m clear span,cills,steps,seismic and other similar bands,plinth courses string courses,lacing courses,parapets and railings upto 60cm in height,copings,kneelers,apex stones,bed plates,water troughs and the ike including weathering slightly rounded or chamfered angles and throating as reqd complete all as specifiedn and as directed by Engineer-in-Charge.

Banyan Engineers and Contractors

kvs constructions

SHRI BALAJI CONSTRUCTIONS