Providing Bulk water connection to M/s MC modi educational trust,Muraharipally(V), Shamirpet mandal,Medchal Malkajgiri District under Medchal Segment

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 2200 mm Dia MS 14 mm Thick

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with Anti Corrosive Bitumen Coating at Out side for pipes to be laid on existing piers at Kudavelly canal crossing incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 2200 mm Dia MS 20 mm Thick

Errection of procured DI D/F Butterfly valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI D/F Butterfly valve of DN 2000mm on 2200mm dia MS Pipeline.

Errection of procured DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, DI Specials to suit the pressure class on main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI Scour valve of DN 600mm on 2200mm dia MS Pipeline.

Errection of procured Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 300mm dia 3.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes.Errection of procured Single Chamber DI Air Valve of DN 300mm on 2200mm dia MS Pipeline

Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for pipelines, including dressing bed and sides to required level and profile, cost of all materials, machinery, labour etc., complete with lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for pipelines including levelling the bed by removing all projections by hammering / chiselling, cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Construction of Chainage stones/Guide stones along the pipeline for every 200m including CC bed with CC (1:4:8) and 0.9m height guide stone as mentioned in APDSS, with painting and marking the chainage on it (With MB engravement), incl all charges etc for finished item of work complete but excluding GST and other taxes.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for foundations incl. all charges etc for finished item of work complete but excluding GST and other taxes.

Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing incl. all charges etc for finished item of work complete but excluding GST and other taxes.

RCC (1:1.5:3) M20 using 20 mm HBG metal icluding Cost and conveyance of the all materials but exluding the cost of steel incl. all charges etc for finished item of work complete but excluding GST and other taxes.

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc for finished item of work complete but excluding GST and other taxes.

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 500 mm Dia MS 10 mm Thick

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 1300 mm Dia MS 10 mm Thick pipeline to be laid on Pedastals

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 1600 mm Dia MS 12 mm Thick

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 1600 mm Dia MS 12 mm Thick pipeline to be laid on Pedastals

Construction of pipelines for water supply with Centrifugally Ductile Iron S/S pipes as per IS:12288 :1987 with its amendments and revisions thereon including supply of pipes with rubber gaskets as per IS:8329-2000 including inside cement mortar lining and outside zinc coating, mechanical joints as per IS:13382-1992 and jiffy joints and as per Technical specifications as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation of pipelines as per standard in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials, and labour charges etc for finished item of work complete but excluding GST and all other taxes. 500 Dia, DI K9 Pipeline

Manufaturing,Supply, Delivery , laying and jointing of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985/8329-2000 with latest amendments and locking bars & rubber spacers , conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost includes soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials etc for finished item of work complete but excluding GST and all other taxes. 500mm Dia, DI K9 RJT pipes

Manufacture, Supply, delivery & Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear for finished item of work complete Excluding GST and all other Taxes. Gate Valves (Soft Seated) of DN 500mm on 500mm dia DI K9 Pipeline

Errection of procured DI D/F Butterfly valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI D/F Butterfly valve of DN 1100mm on 1300mm dia MS Pipeline.

Errection of procured DI D/F Butterfly valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI D/F Butterfly valve of DN 1400mm on 1600mm dia MS Pipeline.

Manufacture, Supply , delivery & Erection of DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, CI Specials to suit the pressure class of main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. DI Scour valve of DN 600mm on 1300mm dia MS Pipeline.

Manufacture, Supply , delivery & Erection of DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, CI Specials to suit the pressure class of main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. DI Scour valve of DN 300mm on 500mm dia DI K9 Pipeline.

Erection of procured DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, DI Specials to suit the pressure class on main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI Scour valve of DN 600mm on 1600mm dia MS Pipeline.

Manufacture, Supply , delivery & Erection of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 100mm dia 2.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes. Air Valve of DN 300mm on 1300mm dia MS Pipeline

Manufacture, Supply , delivery & Erection of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 100mm dia 2.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes. Air Valve of DN 150mm on 500mm dia DI K9 Pipeline

Erection of procured Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 300mm dia 3.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI Air Valve of DN 300mm on 1600mm dia MS Pipeline

Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for pipelines, including dressing bed and sides to required level and profile, cost of all materials, machinery, labour etc., complete with lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for pipelines including levelling the bed by removing all projections by hammering / chiselling, cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Construction of Chainage stones/Guide stones along the pipeline for every 200m including CC bed with CC (1:4:8) and 0.9m height guide stone as mentioned in APDSS, with painting and marking the chainage on it (With MB engravement), incl all charges etc for finished item of work complete but excluding GST and other taxes.

Providing, installing and giving satisfactory test & trial of ultrasonic clamp on portable type flow meter working on conditions & specifications, calibration, inspection, testing, training, guarantees and manufacturers test certificate/declaration copy along with accessories as mentioned above along with accessories like. 1)Magnetic Clamos – 1 Pair & 2) Suitable carrying case-1 etc for finished item of work complete but excluding GST and other taxes.

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils including hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in – Charge. etc for finished item of work complete but excluding GST and other taxes. 2100 mm dia MS Encasing pipe for 1600 mm dia Ms pipe.

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils including hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in – Charge. etc for finished item of work complete but excluding GST and other taxes. 800mm dia MS Encasing pipe for 500 mm dia Ms pipe.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for foundations incl. all charges etc for finished item of work complete but excluding GST and other taxes. for Pedastals and Thrust Blocks

Drilling of Holes of 25 mm dia on hard rock over the area of pedesatls with considering 1000mm c/c Staggered diatance between holes using pnuematic compressor including cement/Fosroc grouting but excluding the cost of steel etc for finished item of work complete but excluding GST and other taxes. for Pedastals and Thrust Blocks

Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing incl. all charges etc for finished item of work complete but excluding GST and other taxes. for Pedastals and Thrust Blocks

RCC (1:1.5:3) M20 using 20 mm HBG metal icluding Cost and conveyance of the all materials but exluding the cost of steel incl. all charges etc for finished item of work complete but excluding GST and other taxes.

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc for finished item of work complete but excluding GST and other taxes.

Quarry rubbish filling in basement with watering and tamping including all charges etc for finished item of work complete but excluding GST and other taxes.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for Mini tank Crossinng and Culvert crossings

Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing incl. all charges etc for finished item of work complete but excluding GST and other taxes. for Mini tank Crossinng and Culvert crossings

RCC (1:1.5:3) M20 using 20 mm HBG metal icluding Cost and conveyance of the all materials but exluding the cost of steel incl. all charges etc for finished item of work complete but excluding GST and other taxes.for Mini tank Crossinng and Culvert crossings

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc for finished item of work complete but excluding GST and other taxes. for Mini tank Crossinng and Culvert crossings

Construction of one way Surge Tank 185 KL -6 mts staging using M30 Grade Design mix concrete at the site selected by the department, Head works site selected by the Department using vibrated reinforced cement concrete and as per the approved designs and drawings (Part C of Volumne-I) and specified in technical specification(Part B of Vlume I) with raft foundation ,plastering with CM(1:3) 2 coats of Weather proof emulsion painting for external surfaces, and 3 coats of epoxy paint to inner surface of the reservoir including roof dome, lettering as per Dept Direction, S/F of the DI D/F Pipes verticals, vlaves, Execution as per Design and drawigns approved by the Dept., including the cost and conveyance of the all materials , Bends , Specials Etc complete including the following.- M30 Grade Concretea)Balcony of 0.75mts width at floor slab levelb)D.I man hole covers with frame of size 0.60 X 0.60 mts -2 Nos (light duty)c) DI Swan Neck ventilators shall be provided in Top dome/slab with flyproof meshd)RCC Phinial with copper or Stainless steel flyproof meshe)RCC pre-cast ladder or Aluminium ladder of 0.45 mts width 2 no's f) RCC Spiral staircase, Water level indicator of approved pattern 1 No Lightening arrestor of approved pattern 1 No complete including conductor earthing i) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof dome.J) Railling with Stainless Steel of grade 304 in two rows around OHSR fixed in RCC (1:2:4) of post of size 100x75x75mm with 1.5m m itervals around the pheriphary on top of OHBR, including construction of RCC valve chambers of approved design for outlet, scour etc., complete for finished item of work.The work shall be executed based on the approved designs and drawings of the department. Construction of one way Surge Tank 185 KL -6 mts staging on Ghanpur Pumping Main near Mulugu Forest

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all 0other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 300mm Dia, 8mm Thick MS Pipeline (Filling Pipe)

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all 0other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 800mm Dia 12mm Thick MS Pipeline (Connecting pipe & Over flow pipe )

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all 0other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 100mm Dia 8mm Thick MS Pipeline (Scour Pipe)

Manufacture, Supply , delivery, Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. PN 25 Gate Valves (Soft Seated) of DN 800mm on 800mm dia MS Pipeline

'Manufacture, Supply , delivery, Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes.PN 16 Gate Valves (Soft Seated) of DN 300mm on 300mm dia MS Pipeline

'Manufacture, Supply , delivery, Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. PN 16 Gate Valves (Soft Seated) of DN 100mm on 100mm dia MS Pipeline

'Manufacture, Supply , delivery, Erection of Cast Carbon Steel Multi Door Type Non return Valve as per IS; 5312/ Part II / 1984 Heavy duty material spec. as per 1030/1998 with SS hinges & Seat Rings excluding transportation etc for finished item of work complete but excluding GST and other taxes. PN 25 Non Return Valves of DN 800mm on 800mm dia MS Pipeline

Construction of 2ML capacity- 6 mts Staging Rectangular Over Head Balancing Reservoir at Ghanpur Hillock with partition wall using M30 Grade Design mix concrete at the site selected by the department, Head works site selected by the Department using vibrated reinforced cement concrete and as per the approved designs and drawings (Part C of Volumne-I) and specified in technical specification (Part B of Volume I) with raft foundation, rcc coulmns, brace beams, inside accoproof plastering with CM(1:3), 2 coats of Weather proof external emulsion painting for external surfaces of approved color, lettering as per Dept Direction, S/F of all necessary fixtures like inlet-2 nos, outlets -2nos, scour 2 nos and over flow pipes with inter connection at over flow level, DI PN 1.6 vlaves of required dia, flanges nuts & bolts and Execution as per Design and drawigns approved by the Dept., including the cost and conveyance of the all materials, Bends, Specials etc., complete including the following.- M30 Grade Concrete a)Balcony of 1.2 mts width at floor slab level b)D.I man hole covers with frame of size 0.90 X 0.90 mts -2 Nos (light duty) c) DI Swan Neck DI ventilators shall be provided in Top slab with flyproof mesh d)RCC Phinial with copper or Stainless steel flyproof mesh e) Stainless Steel 304 or Aluminium ladder with required guage of 0.45 mts width 2 no's f) RCC Doglegged staircase with flight width of 1.2 mt and landing of 1.2mts and SS 304 Handrailing upto 1mt ht g)Three coats of food grade epoxy paint to inner surface of the reservoir including top slab. h) Balcony of 1.20 m width at floor slab level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia pipe, middle railing of 25mm dia and verticals with 40mm dia at an interval not more than 1.00m c/c intervals around the pheriphary on top of OHBR. i) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No) j) Lightening Arrestor with all its accessories complete including earthing with relevant IS Codes - 1 No. Including construction of RCC valve chambers of approved design for outlet, scour etc., complete for finished item of work.The work shall be executed based on the approved designs and drawings of the department.

Total Estimated Contract Value(Rs)

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 2200 mm Dia MS 14 mm Thick

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with Anti Corrosive Bitumen Coating at Out side for pipes to be laid on existing piers at Kudavelly canal crossing incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining and outcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 2200 mm Dia MS 20 mm Thick

Errection of procured DI D/F Butterfly valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI D/F Butterfly valve of DN 2000mm on 2200mm dia MS Pipeline.

Errection of procured DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, DI Specials to suit the pressure class on main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI Scour valve of DN 600mm on 2200mm dia MS Pipeline.

Errection of procured Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 300mm dia 3.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes.Errection of procured Single Chamber DI Air Valve of DN 300mm on 2200mm dia MS Pipeline

Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for pipelines, including dressing bed and sides to required level and profile, cost of all materials, machinery, labour etc., complete with lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for pipelines including levelling the bed by removing all projections by hammering / chiselling, cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Construction of Chainage stones/Guide stones along the pipeline for every 200m including CC bed with CC (1:4:8) and 0.9m height guide stone as mentioned in APDSS, with painting and marking the chainage on it (With MB engravement), incl all charges etc for finished item of work complete but excluding GST and other taxes.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for foundations incl. all charges etc for finished item of work complete but excluding GST and other taxes.

Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing incl. all charges etc for finished item of work complete but excluding GST and other taxes.

RCC (1:1.5:3) M20 using 20 mm HBG metal icluding Cost and conveyance of the all materials but exluding the cost of steel incl. all charges etc for finished item of work complete but excluding GST and other taxes.

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc for finished item of work complete but excluding GST and other taxes.

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 500 mm Dia MS 10 mm Thick

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 1300 mm Dia MS 10 mm Thick pipeline to be laid on Pedastals

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 1600 mm Dia MS 12 mm Thick

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 1600 mm Dia MS 12 mm Thick pipeline to be laid on Pedastals

Construction of pipelines for water supply with Centrifugally Ductile Iron S/S pipes as per IS:12288 :1987 with its amendments and revisions thereon including supply of pipes with rubber gaskets as per IS:8329-2000 including inside cement mortar lining and outside zinc coating, mechanical joints as per IS:13382-1992 and jiffy joints and as per Technical specifications as per requirements, lowering, laying and jointing of pipes true to alignment and gradient, trench excavation of pipelines as per standard in all soils except rock requiring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering and tamping and removing surplus earth from site of work and filling pipeline with water and testing etc., complete. The rates are inclusive of cost & conveyance of all materials, and labour charges etc for finished item of work complete but excluding GST and all other taxes. 500 Dia, DI K9 Pipeline

Manufaturing,Supply, Delivery , laying and jointing of Double chambered restrained joint DI K9 Pipes confirming to IS 8329 (restrained joints are designed and tested as per ISO 10804) (to be used to for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985/8329-2000 with latest amendments and locking bars & rubber spacers , conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost includes soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials etc for finished item of work complete but excluding GST and all other taxes. 500mm Dia, DI K9 RJT pipes

Manufacture, Supply, delivery & Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear for finished item of work complete Excluding GST and all other Taxes. Gate Valves (Soft Seated) of DN 500mm on 500mm dia DI K9 Pipeline

Errection of procured DI D/F Butterfly valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI D/F Butterfly valve of DN 1100mm on 1300mm dia MS Pipeline.

Errection of procured DI D/F Butterfly valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI D/F Butterfly valve of DN 1400mm on 1600mm dia MS Pipeline.

Manufacture, Supply , delivery & Erection of DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, CI Specials to suit the pressure class of main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. DI Scour valve of DN 600mm on 1300mm dia MS Pipeline.

Manufacture, Supply , delivery & Erection of DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, CI Specials to suit the pressure class of main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. DI Scour valve of DN 300mm on 500mm dia DI K9 Pipeline.

Erection of procured DI Scour valve arrangement on pipe line with DI D/F Butterfly valves conforming to IS14846/2000 with amendments No. 1&2heavy duty with CI grade FG 260 as perIS: 210. Two coats of primer suitable forEPOXY PAINTS finish shall be appliedto all metal surface and finally two coatsof Epoxy Paint. The Valves shall betested for (closed end Test) against Hydrostatic test requirement. The operation can be done with handwheel/cap. ISI Marked, including dismantling joint, transportation, DI Specials to suit the pressure class on main line, construction of RCC valve chambers as per requirement with R CC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI Scour valve of DN 600mm on 1600mm dia MS Pipeline.

Manufacture, Supply , delivery & Erection of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 100mm dia 2.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes. Air Valve of DN 300mm on 1300mm dia MS Pipeline

Manufacture, Supply , delivery & Erection of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 100mm dia 2.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes. Air Valve of DN 150mm on 500mm dia DI K9 Pipeline

Erection of procured Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions. All internal parts such as float, shell etc., all cover bolts, of stainless steel, and Gaskets and seals of EPDM food grade quality Epoxy powder coating (EP-P) inside and outside colour blue. Drilled as per IS:1538, including fixing and Jointing, transportation, CI Specials to suit the pressure class of pipe and Air Valve Cage of size 1.5x1.8x2.5 firmly embedded four legs in concrete block M20 of size 0.3x.03x0.6m to a depth of 0.60m, with IS40x40x5mm top and bottom frame with legs projection of size 1.0m with 10mm square bars at 100mm c/c in both ways on sides and top and with 40x60mm flat stiffner at the middle of the vertical face alround and with hinges and locking arrangement with a vertical stem of 300mm dia 3.0m lond DI D/F pipe, including fabrication charges, welding including cost of material transportation labour charges including 2 coats of best quality blue colour enamil paint including fixing charges all incidental and operational charges etc for finished item of work complete but excluding GST and other taxes. Errection of procured DI Air Valve of DN 300mm on 1600mm dia MS Pipeline

Excavation in hard rock (including F&F rock) requiring blasting including boulders above 0.6 m upto 1.2 m dia. for pipelines, including dressing bed and sides to required level and profile, cost of all materials, machinery, labour etc., complete with lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for pipelines including levelling the bed by removing all projections by hammering / chiselling, cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lifts etc for finished item of work complete but excluding GST and other taxes

Construction of Chainage stones/Guide stones along the pipeline for every 200m including CC bed with CC (1:4:8) and 0.9m height guide stone as mentioned in APDSS, with painting and marking the chainage on it (With MB engravement), incl all charges etc for finished item of work complete but excluding GST and other taxes.

Providing, installing and giving satisfactory test & trial of ultrasonic clamp on portable type flow meter working on conditions & specifications, calibration, inspection, testing, training, guarantees and manufacturers test certificate/declaration copy along with accessories as mentioned above along with accessories like. 1)Magnetic Clamos – 1 Pair & 2) Suitable carrying case-1 etc for finished item of work complete but excluding GST and other taxes.

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils including hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in – Charge. etc for finished item of work complete but excluding GST and other taxes. 2100 mm dia MS Encasing pipe for 1600 mm dia Ms pipe.

Railway crossing/Road crossing/Canal crossing by adopting trenchless technology tunneling work through specialized pipe jacking method by erecting the equipment to true to the alignment and gradient, by hydraulic pipe jacking technique complete including tunneling, excavation in all types of soils including hard rock and construction of RCC chambers suitable to casing pipe pits, and conveyance charges of machinery and other required materials but excluding cost of encasing pipe, in co-ordination with the concerned authorities as per approved drawings and directed by the Engineer-in – Charge. etc for finished item of work complete but excluding GST and other taxes. 800mm dia MS Encasing pipe for 500 mm dia Ms pipe.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for foundations incl. all charges etc for finished item of work complete but excluding GST and other taxes. for Pedastals and Thrust Blocks

Drilling of Holes of 25 mm dia on hard rock over the area of pedesatls with considering 1000mm c/c Staggered diatance between holes using pnuematic compressor including cement/Fosroc grouting but excluding the cost of steel etc for finished item of work complete but excluding GST and other taxes. for Pedastals and Thrust Blocks

Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing incl. all charges etc for finished item of work complete but excluding GST and other taxes. for Pedastals and Thrust Blocks

RCC (1:1.5:3) M20 using 20 mm HBG metal icluding Cost and conveyance of the all materials but exluding the cost of steel incl. all charges etc for finished item of work complete but excluding GST and other taxes.

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc for finished item of work complete but excluding GST and other taxes.

Quarry rubbish filling in basement with watering and tamping including all charges etc for finished item of work complete but excluding GST and other taxes.

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH ordianry gravelly soils for Mini tank Crossinng and Culvert crossings

Cement concrete (1:4:8) prop using 40 mm gauge HG metal including cost &conveyance like cement, sand, coarse aggregate water etc., to site , cost of seigniorage charges on all materials, all taxes, labour charges , for mixing , laying, concrete in foundation ramming in 15 cm layers, finishing top surface to the required level curing incl. all charges etc for finished item of work complete but excluding GST and other taxes. for Mini tank Crossinng and Culvert crossings

RCC (1:1.5:3) M20 using 20 mm HBG metal icluding Cost and conveyance of the all materials but exluding the cost of steel incl. all charges etc for finished item of work complete but excluding GST and other taxes.for Mini tank Crossinng and Culvert crossings

Supply and delivery of Steel Reinforcement H.Y.S.D. confirming to I.S.S. including cost & conveyance of all materials , cost of binding wire and its fabrication charges, placing in position tying grills etc for finished item of work complete but excluding GST and other taxes. for Mini tank Crossinng and Culvert crossings

Construction of one way Surge Tank 185 KL -6 mts staging using M30 Grade Design mix concrete at the site selected by the department, Head works site selected by the Department using vibrated reinforced cement concrete and as per the approved designs and drawings (Part C of Volumne-I) and specified in technical specification(Part B of Vlume I) with raft foundation ,plastering with CM(1:3) 2 coats of Weather proof emulsion painting for external surfaces, and 3 coats of epoxy paint to inner surface of the reservoir including roof dome, lettering as per Dept Direction, S/F of the DI D/F Pipes verticals, vlaves, Execution as per Design and drawigns approved by the Dept., including the cost and conveyance of the all materials , Bends , Specials Etc complete including the following.- M30 Grade Concretea)Balcony of 0.75mts width at floor slab levelb)D.I man hole covers with frame of size 0.60 X 0.60 mts -2 Nos (light duty)c) DI Swan Neck ventilators shall be provided in Top dome/slab with flyproof meshd)RCC Phinial with copper or Stainless steel flyproof meshe)RCC pre-cast ladder or Aluminium ladder of 0.45 mts width 2 no's f) RCC Spiral staircase, Water level indicator of approved pattern 1 No Lightening arrestor of approved pattern 1 No complete including conductor earthing i) Rate inclusive of three coats of epoxy paint to inner surface of the reservoir including roof dome.J) Railling with Stainless Steel of grade 304 in two rows around OHSR fixed in RCC (1:2:4) of post of size 100x75x75mm with 1.5m m itervals around the pheriphary on top of OHBR, including construction of RCC valve chambers of approved design for outlet, scour etc., complete for finished item of work.The work shall be executed based on the approved designs and drawings of the department. Construction of one way Surge Tank 185 KL -6 mts staging on Ghanpur Pumping Main near Mulugu Forest

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all 0other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 300mm Dia, 8mm Thick MS Pipeline (Filling Pipe)

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all 0other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 800mm Dia 12mm Thick MS Pipeline (Connecting pipe & Over flow pipe )

Manufacture and supply of MS pipe of of Following dia Confirming to IS 3589/2001 using mild steel plate manufactured with electric resistancewelding (ERW) or submerged arc welding (SAW) proccess longitudinally or spirally welded from MS plates confirming to IS 2062, grade-A/B in suitable lengths to suit the site condition as directed by the departmental officers including 10% radio graphic testing at fatory and 100% ultra sonic testing at field welded joints and hydraulic testing at factory incl in lining with cement mortar (1:2) 15mm thick using 4Nos. of 6mmdia MS rings at each end of the pipe / food grade epoxy paint with minimum thickness of 406 microns for suitable inner dia of pipe duly completing sand blasting and outcoating with cement mortar 1:3proportion 30mm thick by short creating or gunetting duly providing wire mesh of size 50x50x3mm incl cost of MS pipe, welding rods, cement, sand, reinforcement, wire mesh and all 0other required materials and inclusive of all taxes and duties and delivery of fabricated inline and outcoated pipes to site and hoisting and carefully lowering the pipes into the trenches are keeping in positions on ready built pedestals or supports and laying them true to alignment and radials and perfect lining by jacking and jointing with three run arc welding and inlining andoutcoating off field weld joints with wire mesh and cement mortar as per the above specifications incl of all jointing materials, earthwork excavation in all soils except rock required blasting, and refilling the trenches with excavated earth (otherthan rocky soils and boulders) labour charges and hydraulic testing of pipeline to a field test pressure in conviant streches and as directed by the departmentatl officers incl of cost of necessary testing equipment and other incidental and operation charges etc for finished item of work complete but excluding GST and other taxes. 100mm Dia 8mm Thick MS Pipeline (Scour Pipe)

Manufacture, Supply , delivery, Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. PN 25 Gate Valves (Soft Seated) of DN 800mm on 800mm dia MS Pipeline

'Manufacture, Supply , delivery, Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes.PN 16 Gate Valves (Soft Seated) of DN 300mm on 300mm dia MS Pipeline

'Manufacture, Supply , delivery, Erection of DI D/F Sluice Valves with body bonnet of ductile cast iron of grade GGG40/ SG 500/7 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per IS:1538, including Cost of DI valve and Specials, dismantling joint to suit the pressure class of pipe, construction of RCC valve chambers as per requirement with RCC slab and RCC manhole cover with locking arrangements etc.complete. The rates are inclusive of cost and conveyance of all materials and labour charges With By-pass & Gear etc for finished item of work complete but excluding GST and other taxes. PN 16 Gate Valves (Soft Seated) of DN 100mm on 100mm dia MS Pipeline

'Manufacture, Supply , delivery, Erection of Cast Carbon Steel Multi Door Type Non return Valve as per IS; 5312/ Part II / 1984 Heavy duty material spec. as per 1030/1998 with SS hinges & Seat Rings excluding transportation etc for finished item of work complete but excluding GST and other taxes. PN 25 Non Return Valves of DN 800mm on 800mm dia MS Pipeline

Construction of 2ML capacity- 6 mts Staging Rectangular Over Head Balancing Reservoir at Ghanpur Hillock with partition wall using M30 Grade Design mix concrete at the site selected by the department, Head works site selected by the Department using vibrated reinforced cement concrete and as per the approved designs and drawings (Part C of Volumne-I) and specified in technical specification (Part B of Volume I) with raft foundation, rcc coulmns, brace beams, inside accoproof plastering with CM(1:3), 2 coats of Weather proof external emulsion painting for external surfaces of approved color, lettering as per Dept Direction, S/F of all necessary fixtures like inlet-2 nos, outlets -2nos, scour 2 nos and over flow pipes with inter connection at over flow level, DI PN 1.6 vlaves of required dia, flanges nuts & bolts and Execution as per Design and drawigns approved by the Dept., including the cost and conveyance of the all materials, Bends, Specials etc., complete including the following.- M30 Grade Concrete a)Balcony of 1.2 mts width at floor slab level b)D.I man hole covers with frame of size 0.90 X 0.90 mts -2 Nos (light duty) c) DI Swan Neck DI ventilators shall be provided in Top slab with flyproof mesh d)RCC Phinial with copper or Stainless steel flyproof mesh e) Stainless Steel 304 or Aluminium ladder with required guage of 0.45 mts width 2 no's f) RCC Doglegged staircase with flight width of 1.2 mt and landing of 1.2mts and SS 304 Handrailing upto 1mt ht g)Three coats of food grade epoxy paint to inner surface of the reservoir including top slab. h) Balcony of 1.20 m width at floor slab level by using Stainless Steel pipe of grade 304 hand railing up to 1.20 m height, with top railing of 40mm dia pipe, middle railing of 25mm dia and verticals with 40mm dia at an interval not more than 1.00m c/c intervals around the pheriphary on top of OHBR. i) Water Level Indicator of reputed make – Digital type (1 No) and Conventional type (1 No) j) Lightening Arrestor with all its accessories complete including earthing with relevant IS Codes - 1 No. Including construction of RCC valve chambers of approved design for outlet, scour etc., complete for finished item of work.The work shall be executed based on the approved designs and drawings of the department.

Total Estimated Contract Value(Rs)