Indapur Industrial Area M and R to WSS at Indapur Modifications in signal splitter for existing display units of flowmeters at Indapur

Amount

Modifications in signal splitter

Ultra sonic/RADAR level transmitter for level measurement at Raw water sump Level in the plant Designing, Supplying, Installing, Testing, Interfacing to PLC panel and commissioning Range : 0-10 /20 meters, including hardware having Accuracy : 0.5 %,minimum Supply Voltage : 24V DC, Output : 4-20 mA

Micro PLC : Designing, supplying, programming , testing, installing, commissioning, maintaining, data logging and of micro PLCs establishing communication with hydraulic devices . .Complete PLC model along with CPU, Power supply unit, interfacing cards, interfacing cables, wireless module, I/O modules, Rack & panel enclosure suitable size hmi. These PLCs shall be interfaced with wireless ommunication system for global data update system .

Wireless communication system on licensed/VPN GPRS network for global data update system

Pressure transmitter for pressure measurement at various locations in the plant: Design, Supply, Installing,Testing, Interfacing to PLC panel and commissioning Range : 0 - 6 kg/sq.cm, including hardware Accuracy : .5% minimum Resolution :

Electrification : Electrificationof global data update systemincluding necessary length ofpower cable ,signalcable ,data cable

UPS & Battery : Designing, suppling, testing, installing, commissioning and for operating, maintaining of 1 kVA /suitable capacity UPS with battery set suitable to power the entire PLC network, PLC panel. DC power supply

Accessories Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.I. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp.

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Sheets (CP-SS) Supplying, erecting, testing & commisioning metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and painted with one coat of red lead paint and 2 coats of enamel paint or powder coating complete as per specification no. CP/SH/CR

Supplying and erecting hylam sheet/ ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6 mm., straining screws, G.l. stay wire 7/8 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete.

C.C. Foundation Making Cement concrete foundation including excavation (60 x 60 x 150)cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay).

Supplying, erecting, testing & commisioning 525 V 3 phase, 50 Hz.,APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Providing & erecting 3 Pole MCCB, 415V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-MCCB

MCCB Panel Boards and Accessories (SW- MCCBPB) Providing & erecting floor/wall mounted MCCB panel board, with door, suitable for 4 pole incoming 250A, 2 ways 4 pole outgoing, up to 100A MCCBs on iron frame, as per specification no SW-MCCBPB. (Excluding MCCBs)

Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no.OH-INS/LA

Supplying and erecting polymer disc type insulator 70KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI

Happy Solutions (BID ID -6647107)