8829/2021-22/E8

Amount

Taking down chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description exec 2 sqm each and refixing in same opening complete all as specified and as directed.

S&F 2nd class hard wood, plain, solid straight chowkhets and frames, wrought framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as direceted.

S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitterd to chowkhets complete all as specified and as directed.

S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded. Fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc complete all as specified and as directed.

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete all as specified and as directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded aggregate ) as in hold fast complete all as specified and as directed.

S&F 3mm thick sheet glass, ordinary qaulity and glazing with oil putty in sqaures n exc 0.5 sqm each panes etc all as specifiedand as directed.

S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed in repair, complete all as specified and as directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and as directed.

S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and as directed.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete all as specified and as directed.

Dismantling plain or corrugated sheets of any description or thickness and gauge as in roof covering and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and as directed. (Make TATA or JSW)

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Demolition of brickwork or stone buolder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for Brick work with sub-class `B' burnt bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc .including raking out joints, hacking for key, scrubing down with water etc .

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified.

M&L for Preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed

M&L for Preparing new plastered surfaces of wall by applying two coats of oil bound distemper over 3mm thick wall care putty on walls etc all as specified and as directed

M&L for Preparing old plastered surfaces of wall by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of cement based paint all as specified .

M&L for Preparing old plastered surfaces of wall by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of oil bound distemper etc all as specified .

Demolition of PCC of any description and any position not otherwise specifically provided for and removing rubbish off the premises.

M&L for cement concrete type B1 1:2:4 , 100 mm thick (using 20mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 1:6 15mm thick for laying floor finishes etc all as specified.

M&L for Virified Ceramic tiles 10 mm thick Light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polish on kota stone to give high gloss finish complete all as specified.

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified

M & L cement concrete type C-2 1:3:6, 100mm thick (Using 40mm graded stone aggt) in sub base complete all as specified and as directed.

M&L for machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and as directed.

M & L for 75 mm thick plain cement concrete 1:3:6, type C2, using 20 mm graded stone aggregate) as in plinth protection, path etc laid in alternate bays not exc 3 m in length, and finishing the surface even and fair without using extra cement all as specified and directed.

Demoition of textile covering including frames (if any) and cover fillets complete all as specified and as directed.

S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement)Perforated particleboard/tiles of 12mm thick for insula-tion and accoustic purposes, as in ceilings flat or sloping 60x60 cm in size complete all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section,in any position in framed work etc all as specified and as directed.

M&L for second class hardwood in scantlings framed and fixed clean sawn etc all as specified and as directed.

S&F Second class soft wood Boarding 20mm thick, clean sawn, secured with screws fixing in roofs complete all as specified and as directed.

M&L for preparation surface of wood and wood based material new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and as directed.

M&L for preparing old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L two coats of synathetic enamel paint on old Steel surfaces, over 10 cms width or girth incl preparation of surfaces.

Taking down carefully copper/aluminium point wiring in PVC casing caping /PVC surface conduit/concealed PVC/steel conduit (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point,or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC unsheathed copper conductor cable for earth continuity in PVC Concealed conduit of approved size and quality ISI marked in Brick machinary/Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash/colour wash all as per existing finishes complete including all other required accessories as specified in Preamble 1(a) to (q) of section 19 of SSR Part-II under heading "Point wiring".fixed on walls/ceiling including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover complete all as specified and directed by Engr-in-charge.

All as per Srl item No 45 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 45 here in before but for one 5 amps socket out let on independent board.

All as per item No 45 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in cocealed PVC conduit of appropriate size and best quality ISI marked, including suitable size of copper lugs and all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron terminal boxes grouting/ flushing on wall for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.

Supply & Fixing Switch piano, flush button, single pole one way 5 Amps

Supply & Fixing Socket outlet 3 pin, 5 amps flush type.

Supply & Fixing Switch piano, flush button, single pole one way 15 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 15 amps flush type.

Supply and fix ceiling rose 65X50 mm three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F Wall mounted LED integrated batten fitting 20 W LED T-5, 4 feet, PVC extruded.Including all accessories complete all as specified and as directed by Engr-in- charge.

S & F in replacement defective LED ultra mordern recess mounting luminaire with high brightness SMD LED as light sources, suitable for Armstrong/Grid ceiling. fixture in mm 600X600 of make:- Crompton /Bajaj / Havells / Wipro complete all as specified and as directed by Engr-in- charge.

Supply and fixing street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr long bent in shape required fixed to pole/ wall with two Nos MS clamps made out of 25x4mm thick flat including nuts and bolts and washer etc complete for fixing of street light fitting including taking down existing.

Supply & fixing Building street light luminaire, LED street light 30/35 watt, IP66 Powder coated pressure die cast aluminium compact High Power LED Street light with heat resistant toughened glass.

M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, PVC sheathed two run (as phase and neutral) and run 4.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one pvc concealed conduit wiring in Brick machinary / Stone machinary wall complete including cutting, chasing, pinning and making good the disturbed surfaces by using cement mortor 1:3 of wall by providing cement plaster and matching the surfaces by white wash / colour wash all as per existing finishes complete all as specified and directed by Engr-in-charge.

Supply & Fixing Sheet metal enclosure for TPN DB,s, double door (when MCB,s to be used) triple pole & neutral 4 way with 200 amps rated bus bar 415 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBTPNHPDD04 of C&S, or 810336 of Indoasian or equivalent in Havells/Legrand

Supply & Fixing Sheet metal enclosure for SPN DB,s, double door (when MCB,s to be used) single pole & neutral 8 way with 200 amps rated bus bar 240 volts with fixing arrangements including taking down ICDP/DB's/ kitkat fuse/MCB SPN/SP of any type as directed by Engineer-in-charge. Cat Part No CSDBSPNDD08 of C&S, or equivalent in Havells/Legrand

Supply and fixing MCB TPN (Three pole & Neutral) 63 Amps 415 Volts all as specified and directed. Make, Havells, Legrand, L&T

Supply and fixing inreplacement MCB single pole and neutral 40 amps, 240 volts complete all as specified and directed. Make:- c

Supply and fixing inreplacement MCB single pole and neutral 6 to 32 Amps, 240 volts complete all as specified and directed. Make:- Havells, Legrand, L&T

Supply and fixing MCB single pole 6 to 32 Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminuin conductor, 1100 V grade, cross sectional area 16 sqmm 4 core.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep and getting out in any type of soil complete all as directed.

M&L for sand cushioning for cable protection 8 cm below the cable and 15 cm above the cable complete all as specified and directed.

M&L for bricks common burnt old size sub class `B' bricks laid dry for cable protection flat width wise complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5mtr above the starting point.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in each layers.

M&L GI pipe light grade 40 mm dia for cable protection laid in trench , under road /nalah or under floor wall etc complete all as directed by Engr-in charge.

S&F in replacement aluminium strip 25 x 3.15mm thick fixed with porcelain/PVC saddles and fixing screws etc with minimum two number saddles with screws on and including PVC gutties in each one mtr of length for roof conductors and down conductors above ground, complete all as specified and directed.

S&F in replacement Air termination single pointed aluminium rod 12 mm dia 300 mm long fixed including taking out old air termination rod complete all as specified and directed

S&F in Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8 mm dia 25 mm long hex. head screw complete all as specified and directed by Engr in charge.

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work in any type of soil including rocky soil also, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

Roshan Lal Thakur

m/S Varun Gupta