AMRUT 2.0 (2023-24)

Amount

Green Space Development at Ward No.7, S.F.No.172/2, OSR Land Near Sea Shore

Earth work excavation and depositing on bank with initial lead of 10 meters and initial lift of 2 meters in hard stiff clay, stiff block cotton hard red earth, murrains, gravel stoney earth and earth mixed with small size boulders and hard gravel soil etc., complete as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for RCC and CC works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation.

a)Columns

b)Lintel & Roof Slab

Supply and fabrication of steel including cost and conveyance of al materials to site and all labour charges etc., to complete as per std., specification.

Providing and laying in position, Standardised Concrete Mix M-20 Grade in acccordance with IS:45-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/ms and maximum water cement ration of 0.55, including admixture (plasticiser super plasticiser) in recommended proportions as per IS:9103 at accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing curing, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirement of IS Standard. (No separate payment will be made by the Department for the excess usage.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Brick Work in Cement Mortor 1:5 Mix (one cement, five sand ) using new best II class Bricks of size 9 x 41/2 x 3 from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Collection supply and filling of gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Dadooing the walls with best approved quality colour glazed tiles of size 0.30 x 0.60 x 6mm set in CM 1:2 (One of cement and two of sand) 10mm thick and pointing with colour cement using 0.4kg per m2 neatly in all floors as directed etc., complete complying with standard specifications.

Floor finishing with Ceramic tilles of size 30cm x 30cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost and conveyance of all materials and all labour charges. Etc. complete

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Rubberised interlocking paver block of M40 grade Providing and Laying of 63mm Thick High strength type Confirming IS 15658 -2006 of Rubberised Interloking Paver Block in requiered size of minimum compressive Strength of 40N/M2 in Uniform Shape of appreoved make to be laid in flumying bore pattern with approved nin - sticking surface in the top and the rate including leveling the base stone dust cushion 10mm thick laying out the pavement cut the pieus to fit edge, vibrating pavers, Sweeping Transporting leading unloading Specfication

Supply and fixing in position INDIAN WATER CLOSET of size 580mm x 440mm white glazed earthen ware of approved quality with P trap or S trap confirming to IS 2556- Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes by dismandling brick masonary reinforced cement concrete roof floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications. The water closegt should be got approved by the EE before use on works

Supply and fixing in position white or colour glazed EUROPEAN WATER CLOSET of best quality and approved make with 100mm P trap or S trap with double flapped rigit PVC seat cover with CP brass hinges with 12.5litres PVC low level flushing tank with all internal fittings etc., etc., complete complying with standard specifications. The water closegt should be got approved by the EE before use on works

Supplying and fixing in position of Indian make White glazed earthen ware Flat Back Urinal of approved quality including dismantling masonry if necessary and redoing the same to original condition etc., complete as directed by the departmental officers.

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Supplying and fixing in position best Indian make Aluminium anodised TOWEL RAIL of approved quality and size 60cm long and 20mm dia with brackets of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the departmental officers.

Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers.

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting one coats over the New iron work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications

Supplying and fixing of UPVC Door shutter including cost of suitable "T" hinges, bolt nuts, handle and cost of teak wood lipping for alround the bison shutters. Including cost and conveyance and labour charges for wrought and put up etc., complete.

Supply Deleivery of PVC and GI Pipe and Specials including cost and conveyance of all materials and all Charges Complete as per standard specification

110mm Dia Pipe

110mm Dia TEE

110MM Dia Bend

40MM Dia PVC Pipe

40MM Dia PVC Elbow

40MM Dia PVC TEE

40MM Dia Gate Valve

25MM Dia PVC

20MM Dia GI Coupling

Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm di

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for Light point/fan point (5 points per coil) [ SD No. 21 ]

Water Tight Bulk Head Fitting suitable for 25 watts LED Lamp with Guard Heavy Type

Supplyandfixingof 20W LED Street Light Fitting with LED with fittingcompletewithcopperchokeandcondensorwith19mmdiaGIpipe(Class'B')with1No.19mmGIbendcompleteontheexistingpost/wallwith16AaerialfuseunitonMSplatewithPVCunsheathedcopperleadswithMSclarnpsandaluminiumpaintingwithfluorescent tubes

Supply and fixing of 2 x 1.5 sq.mm copper cable from pole switching point to light fittings inculuding cost and conveyance etc., complete

Supply and fixing of light post 6.00 M Height length with gradually reduce type pole 3 stages using 75mm and 50mm and 25mm size and bent up to top edge LED including fiber connection junction box internal wiring works on each pole inculuding cost and conveyance etc., complete

Supply and fixing of following L angle truss including cost of Material conveyance of all material, fabrication and fixing charges etc.Complete as per ISI with rust preventive primer & ready to assemble condition for easy installation at site including dismantling making necessary with power drill to the accessories such as supplying and fixing holdfasts, plastic bush inserts receiver runner bottom shock absorbers etc. Complete as Directed by the Departmental Officer.

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Conducting Geophysical Survey, Quality and Quantity test and transportation charges etc. (This includes labour charges in the field, rent of the vehicle for reaching the place, rent of the instrument and excluding charges for the Geologist) (Annexure II-1

Supply and delivery of un plasticised PVC pipes of 3m length with screwed and socket end and centering guide for every 15m length of pipes as per IS 12818/92 and as amended from time to time to suit the borewell upto 80m depth with ISI marking including, loading, unloading, freight, stacking and transit insurance charges etc., complete

150mm dia PVC Plain casing pipes

150mm dia PVC Slotted casing pipes

150mm dia PVC End Cap

Drilling of borewells of size 6" to 8" dia. in sedimentary formation using hand boreset including insertion of casing pipe etc., and supplying and packing of pebbles (Conveyance of hand bore set including loading and unloading to be done by the contractor

Reaming from 150mm dia pilot bore to 300 mm dia bore as directed by the departmentl officers upto 60m depth from the ground level

Labour charges for inserting the casing pipe assembly (With slots or without slots) in the drilled hole, supplying and packing the annular space with pebbles of size and quality as approved by the departmental officers. The pebbles should be approved specification and stacked for premeasurements

Supply and delivery of wet type submersible pumpsets single and Three phase 100mm dia without panel boar suitable for 115mm dia conform to IS 8034/89 and IS 9283/95 with ISI marking as per specificatin for th eduty conditions detailed here under the motor fitted with thepump should be category "B" suitable for installation in 150mm/155mm borewell the pumpset should be wtih 5metre flat submersible copper cable the pump set should be delivered to for any where in Kancheepuram District including packing freight unloading stacking, transit and insurance charges etc., complete

Submersible pumpsets 20 LPM and 40m head

Supply & delivery of Single & Three phase panel board with two level guard with auto start for 2HP single phase submersible pumpset including cost and conveyance of material etc., complete as per standard specification(Rate Rs.4668/- TNVAT @5% extra over the basic rate (TWAD SOR 2016-17 P.No. 115) 4668+233=4901/-

Single Phase panel board

Supply Deleivery of 50mm HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 including cost and conveyance of all materials and all Charges Complete as per standard specification(TWAD 206)

Supply Deleivery of 50mm GI pipes including cost and conveyance of all materials and all Charges Complete as per standard specification

Supply and delivery of PVC insulated and sheathed 3 core 4 sqmm flate type copper cable confirming to IS 694/1990 including cost and conveyance of material etc complete as per standard specification

Providing kiosk of size 75 x 45 x 75 cm made up of G.I. Sheet of 16 guage with locking arrangements and fixing over the pedestal of 0.75 x 0.45 x 1.20 m using country bricks in CM 1:5 and plastering in CM 1:5 12mm thick and finishing etc. The rate including the cost of painting with kiosk earth work to foundation etc., complete as per

Supply Deleivery of 50 mm G.M Non Return Valve

Supply and delivery of 50mm GM gate valve including cost and conveyance of material etc complete as per standard specification

Supply and Erection of 50MM GI Flange Set Service Pipe 3m Length

Supply and Erection Bore Cover Including all Charges etc to Complete

Supply and Erection Bore Clamp Including all Charges etc to Complete

Supply and Erection 50mm GI Elbow Including all Charges etc to Complete

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required dept valves erection clamps, pressure gauges upto the exterior wall of pump room and erectionof panel board consisting of TPICN switches starter, voltmeter, ammeter, three piolot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules, etc compete and testing the pumpset and train run for 10 days

Submersible pumpsets 20 LPM and 40m head

Supply and delivery of PVC insulated and sheathed 3core 16 sqmm multistrand fire retardant flexible copper cable withISI Mark confirming to IS 694/1990 including cost and conveyance of material etc complete as per standard specification (TWAD SOR 2022-2023 P.No. 120 Sl.No.12.1 )

Earth Work Excavation for Foundation in hard stiff black cotton, hard red earth, and sand , silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth with intial lead and lifts and cleaining and levelling the site etc., complete

Supply and Delivery of 63mm dia 6KSC PVC pipe as per IS 4985/2000, the cost shall including loading , unloading and stacking charges etc., complete as per standard specification

Lowering charges for laying and jointing for 63mm OD PVC Pipe, only labour charges etc., complete (TWAD SOR 2022-23)

Refilling Excavated Earth including all other labour charges etc to complete

Supply and delivery of HDPE Water tank 1000 Litre Capacity bearing with ISI mark providing 1Nos of 20mm Tap connection with check nut washer nipple arrangement and 1 No of 25mm scour and 32mm for over flow arrangement etc., complete (TWAD SOR 2022-23 page no.85)

Construction of 1000 Litre PVC Water Tank pedestal including Earth work, sand filling, PCC 1:4:8, Construction of Solid Blocks of size 40cm x 20cm x 15cm in cement mortar 1:5, Plastering and colour washing including cost and conveyance of materials and all other labour charges etc, complete as per standard specificationi.

Supplying and fixing of incinerator for ladies inclusive of all materials, labour conveyance hoisting and fixing charges etc. (The water tank should be got approved by the EE before use on work. PWD SOR Page No : 72 Sl.No: 296

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid 32mm - 1 No. (b) Media 13054 No. Vessel with 25 nb Multiport Valve (with Media Pubble and Fine Sand and ctivated Carbon Filling, Course Silex and Fine Silex) set (c) Feed Pump 1.5 HP 1 No.(d) Vertical Pump 2-18, 3.00 HP/Single Phase 1 No.(e) Membrane 80 x 40 film tec'(or) equilaents / Osmonic (USA)- 1 No. and Membrane Pressure Vessel 80 x 40 -1 No. & Pressure Gauge - 3 Nos.(f) Flow Meter - 2 No. 20" Filter with Housing - 2 No., Low Pressure Switch- 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.