REPAIR TO PENT ROOFING, SHEETING, PLASTERING AND FALSE CEILING WORK TO CERTAIN BUILDING AND WATER PROOFING TREATMENT INCLUDING FLOORING, PLASTERING/CLEANING OF WATER TANK UNDER AGE B/R-I OF GE NAGROTA.

Amount

Dismantling plain or corrugated steel sheeting any guage, thickness, including nainital or similar pattern roof covering complete all as specified and directed

Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering, complete all as specified

S & F 0.63mm thick Galvanised , corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs with 120 grams/sqm zinc coating ,complete all as specified and as directed.

M & L for 0.80 mm thick plain galvanised mild steel sheeting in ridge, hips, valley gutter, drip and stright flashing(length and girth as fixed) having Zinc coating @ 120 gm/sqm fixed with 'L' type or 'J' type or cranked hook bolt complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

S & F prepainted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coveing/cladding to wall fixed with self tapping screws/L-type or J-type or cranked hook bolts in lieu of screw as per manufacturer instruction, complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description not otherwise complete all as specified and directed

M&L for mild steel rolled work as in roof trusses ( framed) , trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections ) including distance pieces, cleats etc. , conforming to grade Fe 410-S, complete all as specified and directed.

S&F wind ties for roof including securing bolt post and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire , etc., including all necessary drilling, bolting or riveting etc., and similar work confirming to Fe-290 Gde E-165 complete, all as specified .

Preparing of new steel surface of any description, and applying two coat of synthetic enamel paint over a coat of red oxide primer not otherwise described over 10 cm width or girth complete all as specified and directed by Engineer in charge.

M&L prepariation of new steel and iron surfaces of any description n. exc 10 cm width or girth and applying two coats of synthetic enamel paint paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Preparing old steel surfaces of any description not otherwise describe over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F aluminium anodised snap grid (powder coated) frame work of grid size 605 x 605 mm including hangers 6 mm dia GI (upto) 1200 mm long) for false ceiling including notching and preparing holes , including aluminium cleat/corner pierces and GI 4 mm dia suspenders with butterfly clips, wall angle of size 24 x 24 mm, main runner (tee) of size 24 x 38 mm cross tee of size 24 x 28 mm ( No of suspenders shall be decided by the GE as per acual size requirement) including 4 mm thick non asbestos fibre cement plain builidng board fixed to aluminum snap grid and providing two coat of white wash incuding preparation of surface including dismantling wall and ceiling board, any thickness including cover fillets if any complete all as specified and directed.

Demolition of brick work / stone masonry built in cement mortar including all quoins ,arches , pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M & L for rendering 10 mm thick on other faces of fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on other faces of fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Preparing new plastered surface of wall and applying two coat of oil bound distemper over and incl a layer of wall care putty 3 mm thick complete all as specified and directed.

Demolition of cement concrete of any description and any position not otherwise specifically provided, complete all as specified and directed by Engr-in-Charge.

Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m.

M&L 50mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate ) as in padding concrete finished even and smooth witout using extra cement

M&L 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.

Supplied only for Integral water proofing compound.

M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces

M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.

M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing:- Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.

Applying one coat of aluminium paint on top of APP membrane.

Dismantling water tanks and removing to store of capacity exc 250&n exc 500 ltrs

Dismantling water tanks and removing to store of capacity exc 500&n exc 1000 ltrs

Supply and fix 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

Supply and fix 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified and directed.

S&F in repairs 20 mm dia Ball PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed

S&F 15 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors including taking down , complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore steel water tubing 'medium grade' galvanised with all fitting (i.e. Tee, socket, bend etd) complete to walls and ceilings or laid in floors including taking down , complete all as specified and directed by Engr-in-Charge.

S&F in repairs 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, complete all as specified and directed

S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends/shoe, complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 as in ceiling, soffit of chajja etc complete all as specified and directed.

M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash complete all as specified and directed

Preparing of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 250 and n exc 500 ltr complete all as specified and directed

M & L for disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 500and n exc 1000 ltr complete all as specified and dircted

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr.

M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr.

Demolition of concrete ground floors and paving n exc 15 cm thickness(below or above ground floor), complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 as in plinth protection & finishing the surface even & fair without using extra cement complete all as specified and directed.

M&L 100 mm thick Cement concrete 1:4:8, type B-2 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth without using extra cement, complete all as specified and directed.

M&L 100 mm thick Cement concrete 1:2:4, type B-2 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth without using extra cement, complete all as specified and directed.

M & L 75mm thick PCC 1:3:6 type B-2 ( 40 mm graded aggregsate) as in subbase and pavings etc complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment, M-35 Grade etc complete all as specified and directed.

M/L Cement concrete 1:5:10 type E-2 (using 40 mm graded granite stone aggregate) as in sub base flooring, filling and mass concrete Complete all as specified and as directed.

M&L chequered cement tiles concrete 25cm x 25 cm x 22mm thick, set jointed in neat cement slurry in floor including 15 mm thick screed bed or bedding in CM 1:4,complete all as specified and directed. .

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs. 1,66,530.00 during AOC Note:- Tenderers shall not quote for this Schedule

CHOPRA CONSTRUCTIONS

U K Engineering Works

Hare krishna engineering const.

ASHFAQ AHMED MANHAS

M/S DEEP KUMAR MALIA

M/S MANISHA BUILDERS

BMMJ TRADERS AND ENGINEERS

Kanwal Nain Behl