Supply and Installation of Workshop Tools at Consignee Locations

Amount

Carpenter Marking Gauge

Carpenter Mortise Gauge

Carpenter Square - 200 mm

Chisel - Bevel Edge, Set of 8 with Handle

Hand Drill Machine - 6 mm

Plane - Adjustable, 250 mm

Plane - Jack - 250 mm X 50 mm Blade

Plane - Jack - 450 mm X 60 mm Blade

Round Crow Bar - with Chisel and Claw End, Length = 1500 mm, Diameter = 30 mm

Router Plane - 12mm

Sheet Cutter - Sun mica/ Lamination Sheet Cutter

Spoke Shaves - Flat Sole, Adjustable, 250 mm

Spoke Shaves - Round Sole, Adjustable, 250 mm

Trammel Points - with Beam 600 mm

Wood Carving Tool Set - Set of 12 Pieces

Wooden Straight Edge - 4 Feet

Chisel - Flat, 21 mm X 150 mm

Chisel - Bolster, 100 mm X 200 mm

Chisel - Cold, 16 mm X 150 mm

Chisel - Cold, 20 mm X 150 mm

Chisel - Cold, 25 mm X 200 mm

Chisel - Cold, 30 mm X 300 mm

Chisel - Cold, 9 mm X 125 mm

Chisel - Cold, Cross Cut, 6 mm X 150 mm

Chisel - Cold, Half Round, 10 mm X 200 mm

Chisel - Cold, Round Nose, 6 mm X 100 mm

Chisel - Cold, Round Nose, 9 mm X 100 mm

Chisel - Diamond Point, 9 mm X 150 mm

Chisel - Firmer, Gouge, Set of 6 with Wooden Handle

Chisel - Knife, 50 mm

Chisel - Mortise, Set of 4 with Wooden Handle

Chisel - Scribing, Gouge, Set of 6 with Wooden Handle

Clamp - C, 50 mm

Clamp - C, 100 mm

Clamp - C, 200 mm

Clamp - C, 300 mm

Clamp - Parallel, Adjustable, 200 mm (F Clamp)

Diamond Wheel Dresser - Single Stone Mounted, 2.0 Carat

Hammer - Ball Peen, 200 grams with Handle

Hammer - Ball Peen, 500 grams with Handle

Hammer - Ball Peen, 800 grams with Handle

Hammer - Brick Layer, 600 grams with Handle

Hammer - Chipping, 250 grams with Handle

Hammer - Claw, 340 grams with Handle

Hammer - Copper/ Brass, 1000 grams with Handle

Hammer - Cross Peen, 500 grams with Handle

Hammer - Machinist, 300gm with Handle

Hammer - Nylon, 30 mm with Handle

Hammer - Round Flat and Cross Pin, 320 grams with Handle

Hammer - Sledge, 1800 grams with Handle

Hammer - Sledge, 6000 grams with Handle

Hammer - Wooden Mallet

Brush Steel Wire - 150 X 50 mm

Center Square - Size 400 X 250 mm Blade

Dog Carrier - Straight & Bent Tail, 50 mm

Oil Stone - 150 mm X 50 mm X 25 mm

Pickaxe

Scriber - Bend and Straight, 150 mm

Shovel

Spade

Square Bevel - 150 mm

Stud Extractor - Roller Type for 5 to 20 mm

Tong - Flat, 300 mm

Washer Cutter

Aviation Snips - Left Cut, 250 mm

Aviation Snips - Right Cut, 250 mm

Aviation Snips - Straight Cut, 250 mm

Cable Cutter - 150 mm

Crimping Tool - 5 in 1

Crimping Tool - RJ 45

Pincer - 200 mm

Plier - Circlip, External, Bend, 180 mm

Plier - Circlip, External, Straight, 200 mm

Plier - Circlip, Internal, Bend, 180 mm

Plier - Circlip, Internal, Straight, 200 mm

Plier - Combination, 200 mm

Plier - Flat Nose, 150 mm

Plier - Long Nose, 200 mm

Plier - Round Nose, 150 mm

Plier - Saw Set, 175 mm

Plier - Side Cutting, 200 mm

Plier - Vice Grip, 250 mm

Tube Bending Plier Set

Water Pump Plier - 250 mm

Wire Cutter and Stripper - 150 mm

Plumb Bob - 115 grams

Plumb Bob - 200 grams

Plumb Bob - 500 grams

Pipe Cutter - For Copper Tube, 3 mm to 16 mm

Pipe Cutter - Wheel Type, 3mm to 30 mm

Pipe Dies and Die Stock Complete Set in Box 1/2" to 2"

Pipe Flaring Tool Set - Tube Cutter = 1/8 to 1-1/8 inches, Flaring Block = 3/16 through 5/8 inch and Flaring Yoke

Composite Pipe Installation Tools Set - Plier, Cutter and Pressing tools

Center Punch - 100 mm

Hollow Punch Set - 6mm to 16mm, Set of 7

Letter and Number Punch - 4 mm

Nail Punch - 150 mm

Poker - 90 mm

Prick Punch - 100 mm

Rawl Punch Holder and Bit - 6 mm

Rawl Punch Holder and Bit - 8 mm

Rawl Punch Holder and Bit - 10 mm

Rawl Punch Holder and Bit - 12 mm

Rawl Punch Holder and Bit - 14 mm

Round Punch - Solid, 3 mm

Round Punch - Solid, 4 mm

Round Punch - Solid, 6 mm

Compass Saw (Nest of Saw) - 250 mm with 3 Blades

Cross Cut Saw - 600 mm

Electrician’s Knife - 100 mm

Fret Saw Frame - 150 mm

Glass Cutter - Diamond Point

Hacksaw Frame - Adjustable, 250 mm to 300 mm

Hacksaw Frame - Deep Cutting, 300 mm

Hacksaw Frame - Fixed, 150 mm

Hand Saw - 300 mm

Hand Saw - 450 mm

Marking Knife - 200 mm

Rip Saw - 450 mm

Tenon Saw - 250 mm

Scraper Set - Stainless Steel, 200 mm, Straight Blade=32mm, Straight Blade=50 mm and Angle Blade=32mm

Scraper Set - 200 mm, Triangular, Half Round and Flat

Neon Tester - 500 V

Precision Screw Driver - Set of 6

Screw Driver - Bit Set

Screw Driver - 10 X 200 mm

Screw Driver - 10 X 250 mm

Screw Driver - 10 X 300 mm

Screw Driver - 10 X 450 mm

Screw Driver - 3 X 75 mm

Screw Driver - 6 X 100 mm

Screw Driver - 8 X 150 mm

Screw Driver - 8 X 200 mm

Screw Driver - Insulated, 10 X 250 mm

Screw Driver - Insulated, 4 X 150 mm

Screw Driver - Insulated, 6 X 150 mm

Screw Driver - Insulated, 8 X 200 mm

Screw Driver - Insulated, 8 X 300 mm

Screw Driver - Philips, Set of 5

Screw Driver - Set of 7

Screw Extractor Set - Set of 5

Chain Pipe Wrench - 90 mm to 650 mm

Spanner - Adjustable, 150 mm

Spanner - Adjustable, 300 mm

Spanner Set - Box Type, 6 mm to 32 mm, Set of 12

Spanner Set - Double Ended, 6 mm to 22 mm, Set of 8

Spanner Set - Double Ended, 6 mm to 32 mm, Set of 12

Spanner Set - Pin, Set of 4

Spanner Set - Ring, 6 mm to 32 mm, Set of 12

Spanner Set - Spark Plug, Set of 5

Stillson Pattern Pipe Wrenches - Length = 300 mm, Opening = 42 mm

Torque Wrenches - Range 5 Nm to 200 Nm Set of 3,

Universal Pipe Wrenches - 275 mm

Universal Puller - 3 Leg, 150 mm

Universal Puller - 3 Leg, 200 mm

Plumb Level - 1000 mm

Spirit Level - 300 mm

Straight Edge - Steel, 1200 mm

Straight Edge - Steel, 600 mm

Surface Plate - Cast Iron, 1000 x 1000 mm with Stand and Cover

Surface Plate - Cast Iron, 600 x 600 mm with Stand and Cover

T Bar Cramp - 0.6 Meter

T Bar Cramp - 1.25 Meter

T Bar Cramp - 1.75 Meter

Trowel - Brick, 11 inch X 5.5 inch

Trowel - Brick, 4.5 inch X 1.87 inch

Trowel - Brick, 8 inch X 5.5 inch

Trowel - Heart, 6 inch

Trowel - Heart, 8 inch

Trowel - Inside Corner, 6 Inch, 90 Degree Angle

Trowel - Outside Corner, 6 Inch, 90 Degree Angle

Trowel - Plastering, 13 inch X 5 inch

Trowel - Plastering, 8 inch X 5 inch

Trowel - Pointing, 6 inch

Trowel - Tile, 11 inch X 4 inch, Notch = 10 mm X 10 mm

Pinching Tool

Tweezers - 100 mm, Straight Tip

Tweezers - 100 mm, Bend Tip

File - Cant Saw, Smooth, 150 mm with Handle

File - Car Body, Bastard Cut without Tang, 300 mm with Handle

File - Dread Naught, Bastard, 300 mm with Handle

File - Flat, Aluminium, 200 mm with Handle

File - Flat, Aluminium, 300 mm with Handle

File - Flat, Bastard, 150 mm with Handle

File - Flat, Bastard, 200 mm with Handle

File - Flat, Bastard, 250 mm with Handle

File - Flat, Bastard, 300 mm with Handle

File - Flat, Bastard, 350 mm with Handle

File - Flat, Second Cut, 150 mm with Handle

File - Flat, Second Cut, 200 mm with Handle

File - Flat, Second Cut, 250 mm with Handle

File - Flat, Smooth, 150 mm with Handle

File - Flat, Smooth, 200 mm with Handle

File - Flat, Smooth, 250 mm with Handle

File - Half Round, Bastard, 150 mm with Handle

File - Half Round, Bastard, 200 mm with Handle

File - Half Round, Bastard, 250 mm with Handle

File - Half Round, Bastard Rasp Cut, 250 mm with Handle

File - Half Round, Second Cut, 150 mm with Handle

File - Half Round, Second Cut, 200 mm with Handle

File - Half Round, Second Cut, 250 mm with Handle

File - Half Round, Smooth, 150 mm with Handle

File - Half Round, Smooth, 200 mm with Handle

File - Half Round, Smooth, 250 mm with Handle

File - Knife Edge, 150 mm with Handle

File - Round, Bastard, 150 mm with Handle

File - Round, Bastard, 200 mm with Handle

File - Round, Bastard, 250 mm with Handle

File - Round, Second Cut, 150 mm with Handle

File - Round, Second Cut, 200 mm with Handle

File - Round, Second Cut, 250 mm with Handle

File - Round, Smooth, 150 mm with Handle

File - Round, Smooth, 200 mm with Handle

File - Round, Smooth, 250 mm with Handle

File - Safe Edge Hand, Second Cut, 200 mm with Handle

File - Safe Edge Hand, Second Cut, 250 mm with Handle

File - Slim Taper, 100 mm with Handle

File - Slim Taper, 150 mm with Handle

File - Square, Bastard, 150 mm with Handle

File - Square, Bastard, 200 mm with Handle

File - Square, Bastard, 250 mm with Handle

File - Square, Second Cut, 150 mm with Handle

File - Square, Second Cut, 200 mm with Handle

File - Square, Second Cut, 250 mm with Handle

File - Square, Smooth, 150 mm with Handle

File - Square, Smooth, 200 mm with Handle

File - Square, Smooth, 250 mm with Handle

File - Triangular, Bastard, 150 mm with Handle

File - Triangular, Bastard, 200 mm with Handle

File - Triangular, Bastard, 250 mm with Handle

File - Triangular, Second Cut, 150 mm with Handle

File - Triangular, Second Cut, 200 mm with Handle

File - Triangular, Second Cut, 250 mm with Handle

File - Triangular, Smooth, 150 mm with Handle

File - Triangular, Smooth, 200 mm with Handle

File - Triangular, Smooth, 250 mm with Handle

File - Warding, Smooth, 150 mm with Handle

File Set - Needle, 160 mm, Set of 12

File Set - Needle, 160 mm, Set of 6 with Soft Grip

File Set - Bastard, 150 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Bastard, 200 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Bastard, 250 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Second Cut, 150 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Second Cut, 200 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Second Cut, 250 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Smooth, 150 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Smooth, 200 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

File Set - Smooth, 250 mm, Set of 5 (Flat, Half Round, Round, Square, Triangular)

Key File Set - General Purpose, 100 mm, Set of 6 with Wooden Grip

File Set - Mechanic Motor Vehicle, Set of 20

Yusuf Enterprises (BID ID -6494079)

SANKALP ENTERPRISES (BID ID -6496864)